Hello, Something is happening with my configuration, every time i restart opensips, opensips lost the registrations and i have to restart the phones....by the way, i configured the authentication and is not workink, for non-Register and Register OpenSIPS is not sending the 401 or 407...i don't now what is going on...a will paste here my configs, opensips.cfg and openctlrc
*opensips.cfg* # # $Id: opensips.cfg 7027 2010-07-15 13:48:29Z razvancrainea $ # # OpenSIPS basic configuration script # by Anca Vamanu <a...@voice-system.ro> # # Please refer to the Core CookBook at: # http://www.opensips.org/index.php?n=Resources.DocsCookbooks # for a explanation of possible statements, functions and parameters. # ####### Global Parameters ######### debug=3 log_stderror=no log_facility=LOG_LOCAL0 fork=yes children=4 #total number of UDP SIP worker processes per interface /* uncomment the following lines to enable debugging */ #debug=6 #fork=no #log_stderror=yes server_header="Server: OpenSIPS SIP Proxy" /* uncomment the next line to disable TCP (default on) */ disable_tcp=yes #total number of TCP SIP worker processes in total /* uncomment the next line to enable the auto temporary blacklisting of not available destinations (default disabled) */ #disable_dns_blacklist=no /* uncomment the next line to enable IPv6 lookup after IPv4 dns lookup failures (default disabled) */ #dns_try_ipv6=yes /* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */ #auto_aliases=no /* uncomment the following lines to enable TLS support (default off) */ #disable_tls = no #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "//etc/opensips/tls/user/user-cert.pem" #tls_private_key = "//etc/opensips/tls/user/user-privkey.pem" #tls_ca_list = "//etc/opensips/tls/user/user-calist.pem" port=5060 /* uncomment and configure the following line if you want opensips to bind on a specific interface/port/proto (default bind on all available) */ listen=udp:172.30.140.8:5060 ####### Modules Section ######## #set module path mpath="//lib/opensips/modules/" /* uncomment next line for MySQL DB support */ loadmodule "db_mysql.so" loadmodule "signaling.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri.so" loadmodule "acc.so" /* uncomment next lines for MySQL based authentication support NOTE: a DB (like db_mysql) module must be also loaded */ loadmodule "auth.so" loadmodule "auth_db.so" /* uncomment next line for aliases support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like db_mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ #loadmodule "domain.so" /* uncomment the next two lines for presence server support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "presence.so" #loadmodule "presence_xml.so" # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- registrar params ----- /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- usrloc params ----- modparam("usrloc", "db_mode", 2) #All changes are made to memory and database synchronization is done in the timer /* uncomment the following lines if you want to enable DB persistency for location entries */ modparam("usrloc", "db_url","mysql://opensips:opensipsro<@localhost/opensips") # ----- uri params ----- modparam("uri", "use_uri_table", 0) # ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) /* uncomment the following lines to enable DB accounting also */ modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) # ----- auth_db params ----- /* uncomment the following lines if you want to enable the DB based authentication */ modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url","mysql://opensips:opensipsro<@localhost/opensips") modparam("auth_db", "load_credentials", "") # ----- alias_db params ----- /* uncomment the following lines if you want to enable the DB based aliases */ #modparam("alias_db", "db_url", # "mysql://opensips:2705ag1<@localhost/opensips") # ----- domain params ----- /* uncomment the following lines to enable multi-domain detection support */ #modparam("domain", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips") #modparam("domain", "db_mode", 1) # Use caching # ----- multi-module params ----- /* uncomment the following line if you want to enable multi-domain support in the modules (dafault off) */ #modparam("auth_db|usrloc|uri", "use_domain", 1) # ----- presence params ----- /* uncomment the following lines if you want to enable presence */ #modparam("presence|presence_xml", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips") #modparam("presence_xml", "force_active", 1) #modparam("presence", "server_address", "sip:192.168.1.2:5060") ####### Routing Logic ######## # main request routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accounting ... setflag(3); # ... even if the transaction fails } else if (is_method("INVITE")) { # even if in most of the cases is useless, do RR for # re-INVITEs alos, as some buggy clients do change route set # during the dialog. record_route(); } # route it out to whatever destination was set by loose_route() # in $du (destination URI). route(1); } else { /* uncomment the following lines if you want to enable presence */ ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") { ## # in-dialog subscribe requests ## route(2); ## exit; ##} if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after # a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction -> # ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } #initial requests # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # authenticate if from local subscriber (uncomment to enable auth) # authenticate all initial non-REGISTER request that pretend to be # generated by local subscriber (domain from FROM URI is local) if (!(method=="REGISTER") && from_uri==myself) /*no multidomain version*/ ##if (!(method=="REGISTER") && is_from_local()) /*multidomain version*/ { if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } if (!db_check_from()) { sl_send_reply("403","Forbidden auth ID"); exit; } ## consume_credentials(); ## # caller authenticated } # preloaded route checking if (loose_route()) { xlog("L_ERR", "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]"); if (!is_method("ACK")) sl_send_reply("403","Preload Route denied"); exit; } # record routing if (!is_method("REGISTER|MESSAGE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(1); # do accounting } if (!uri==myself) ## replace with following line if multi-domain support is used ##if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS ##if($rd=="tls_domain1.net") { ## t_relay("tls:domain1.net"); ## exit; ##} else if($rd=="tls_domain2.net") { ## t_relay("tls:domain2.net"); ## exit; ##} route(1); } # requests for my domain ## uncomment this if you want to enable presence server ## and comment the next 'if' block ## NOTE: uncomment also the definition of route[2] from below ##if( is_method("PUBLISH|SUBSCRIBE")) ## route(2); if (is_method("PUBLISH")) { sl_send_reply("503", "Service Unavailable"); exit; } if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!www_authorize("", "subscriber")) { www_challenge("", "0"); exit; } ## if (!db_check_to()) { sl_send_reply("403","Forbidden auth ID"); exit; } if (!save("location")) sl_reply_error(); exit; } if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases"); # do lookup with method filtering if (!lookup("location","m")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also setflag(2); route(1); } route[1] { # for INVITEs enable some additional helper routes if (is_method("INVITE")) { t_on_branch("2"); t_on_reply("2"); t_on_failure("1"); } if (!t_relay()) { sl_reply_error(); }; exit; } # Presence route /* uncomment the whole following route for enabling presence NOTE: do not forget to enable the call of this route from the main route */ ##route[2] ##{ ## if (!t_newtran()) ## { ## sl_reply_error(); ## exit; ## }; ## ## if(is_method("PUBLISH")) ## { ## handle_publish(); ## } ## else ## if( is_method("SUBSCRIBE")) ## { ## handle_subscribe(); ## } ## ## exit; ##} branch_route[2] { xlog("new branch at $ru\n"); } onreply_route[2] { xlog("incoming reply\n"); } failure_route[1] { if (t_was_cancelled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply("404","Not found"); ## exit; ##} # uncomment the following lines if you want to redirect the failed # calls to a different new destination ##if (t_check_status("486|408")) { ## sethostport("192.168.2.100:5060"); ## # do not set the missed call flag again ## t_relay(); ##} } *opensipsctlrc* # $Id: opensipsctlrc 7337 2010-10-28 22:02:46Z osas $ # # The OpenSIPS configuration file for the control tools. # # Here you can set variables used in the opensipsctl and opensipsdbctl setup # scripts. Per default all variables here are commented out, the control tools # will use their internal default values. ## your SIP domain SIP_DOMAIN=172.30.140.8 ## chrooted directory # $CHROOT_DIR="/path/to/chrooted/directory" ## database type: MYSQL, PGSQL, ORACLE, DB_BERKELEY, or DBTEXT, ## by default none is loaded # If you want to setup a database with opensipsdbctl, you must at least specify # this parameter. DBENGINE=MYSQL ## database host DBHOST=localhost ## database name (for ORACLE this is TNS name) DBNAME=opensips # database path used by dbtext or db_berkeley # DB_PATH="/usr/local/etc/opensips/dbtext" ## database read/write user DBRWUSER=opensips ## password for database read/write user #DBRWPW="opensipsrw" ## database read only user DBROUSER=opensipsro ## password for database read only user DBROPW=opensipsro ## database super user (for ORACLE this is 'scheme-creator' user) DBROOTUSER="root" # user name column # USERCOL="username" # SQL definitions # If you change this definitions here, then you must change them # in db/schema/entities.xml too. # FIXME # FOREVER="2020-05-28 21:32:15" # DEFAULT_ALIASES_EXPIRES=$FOREVER # DEFAULT_Q="1.0" # DEFAULT_CALLID="Default-Call-ID" # DEFAULT_CSEQ="13" # DEFAULT_LOCATION_EXPIRES=$FOREVER # Program to calculate a message-digest fingerprint # MD5="md5sum" # awk tool # AWK="awk" # grep tool # GREP="grep" # sed tool # SED="sed" # Describe what additional tables to install. Valid values for the variables # below are yes/no/ask. With ask (default) it will interactively ask the user # for an answer, while yes/no allow for automated, unassisted installs. # # If to install tables for the modules in the EXTRA_MODULES variable. # INSTALL_EXTRA_TABLES=ask # If to install presence related tables. # INSTALL_PRESENCE_TABLES=ask # Define what module tables should be installed. # If you use the postgres database and want to change the installed tables, # then you must also adjust the STANDARD_TABLES or EXTRA_TABLES variable # accordingly in the opensipsdbctl.base script. # opensips standard modules # STANDARD_MODULES="standard acc lcr domain group permissions registrar usrloc # msilo alias_db uri_db speeddial avpops auth_db pdt dialog # dispatcher dialplan drouting nathelper load_balancer" # opensips extra modules # EXTRA_MODULES="imc cpl siptrace domainpolicy carrierroute userblacklist b2b" ## type of aliases used: DB - database aliases; UL - usrloc aliases ## - default: none ALIASES_TYPE="DB" ## control engine: FIFO or UNIXSOCK ## - default FIFO CTLENGINE=FIFO ## path to FIFO file OSIPS_FIFO="/tmp/opensips_fifo" ## MI_CONNECTOR control engine: FIFO, UNIXSOCK, UDP, XMLRPC # MI_CONNECTOR=FIFO:/tmp/opensips_fifo # MI_CONNECTOR=UNIXSOCK:/tmp/opensips.sock # MI_CONNECTOR=UDP:192.168.2.133:8000 # MI_CONNECTOR=XMLRPC:192.168.2.133:8000 ## check ACL names; default on (1); off (0) VERIFY_ACL=1 ## ACL names - if VERIFY_ACL is set, only the ACL names from below list ## are accepted ACL_GROUPS="local ld int voicemail free-pstn" ## verbose - debug purposes - default '0' #VERBOSE=1 ## do (1) or don't (0) store plaintext passwords ## in the subscriber table - default '1' STORE_PLAINTEXT_PW=1 ## OPENSIPS START Options ## PID file path - default is: /var/run/opensips.pid # PID_FILE=/var/run/opensips.pid ## Extra start options - default is: not set # example: start opensips with 64MB share memory: STARTOPTIONS="-m 64" # STARTOPTIONS= Thanks in advance!!!
_______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
