Ovidiu, On Tue, Feb 8, 2011 at 2:31 PM, Ovidiu Sas <o...@voipembedded.com> wrote: > You din't posted a proper SIP capture (no UDP src/dst IP for your > packets), but it seems that you are having a firewall issue. Just add
I agree that it almost sounds like a firewall issue but....I completely disabled iptables on the server and tested again - issue persists... So the only other firewall is the PIX - external to this server. All of the protocol fixup in it for SIP is disabled. Not sure how the PIX can play in here when: UPSTREAM PROVIDER | | PIX Firewall | | Cisco 12 port Switch | | | | OpenSIPS Asterisk Once the INVITE comes in, it would not see the PIX again - goes to Opensips and then Asterisk..... > an xlog into your opensips server and see that you will have no > entries in syslog. Added: xlog("L_ERR", "[method=$rm, from=$fu, to=$ru, src_ip=$si]\n"); tested another call and the log entries do so up: Feb 8 17:22:53 mars /usr/sbin/opensips[7046]: INFO:core:probe_max_receive_buffer: using a UDP receive buffer of 255 kb Feb 8 17:23:04 mars /usr/sbin/opensips[7058]: INFO:core:buf_init: initializing... Feb 8 17:23:04 mars /usr/sbin/opensips[7058]: [method=INVITE, from=sip:+13038382386@208.94.157.10:5060, to=sip:17204497101@67.212.153.178:5060;transport=udp, src_ip=208.94.157.10] Feb 8 17:23:07 mars /usr/sbin/opensips[7066]: INFO:core:buf_init: initializing... Feb 8 17:23:07 mars /usr/sbin/opensips[7066]: [method=ACK, from=sip:+13038382386@208.94.157.10:5060, to=sip:17204497101@67.212.153.179:5060, src_ip=208.94.157.10] Feb 8 17:23:18 mars /usr/sbin/opensips[7058]: [method=BYE, from=sip:+13038382386@208.94.157.10:5060, to=sip:17204497101@67.212.153.179:5060, src_ip=208.94.157.10] > The INVITE that is sent out is having the same "Max-Forwards" counter > and you have a second Via with exactly the same branch parameter. Would that not be then the result some 'default' within Opensips since it's occurring with such a basic simple config? The config just calls forward() essentially. No modules are loaded or initialized and the route() block looks simply like: route{ xlog("L_ERR", "[method=$rm, from=$fu, to=$ru, src_ip=$si]\n"); forward("67.212.153.179"); exit; } Thanks! Chris _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users