Hi Bogdan thanks for the prompt and quick reply i will be using Multi Criteria Decision Theory (MCDT) to take the handoff decision between base stations during a call
the possible scenario might be e.g. if the Signal strength is not good enough in an OpenBTS cell and there is jitter above a predefined threshold value and and some other parameters involved (measured via dedicated OpenBTS python scripts) are crossing the threshold values then i will use (MCDT) to take the handoff decision. Remember that the endpoints are emulated as SIP User Agents(clients) using SIP extensions sorry in advance if i once again did not describe my problem properly Best Regards Bye ----- Original Message ----- From: "Bogdan-Andrei Iancu" <bog...@opensips.org> To: "ALICOMPUTECH" <alicomput...@yahoo.com>, "OpenSIPS users mailling list" <users@lists.opensips.org> Sent: Tuesday, March 29, 2011 2:25:50 PM GMT +01:00 Amsterdam / Berlin / Bern / Rome / Stockholm / Vienna Subject: Re: [OpenSIPS-Users] Wana replace Asterisk with OpenSIPS in OpenBTS Project Hi, First of all OpenSIPS is a sip server so it works only with SIP. Secondly, by default opensips is SIP proxy, so it cannot do handover. But using the Back2Back User agent module, you may be able to play with the ongoing calls and move them between different termination points. I can help you more if you could describe the handover scenario you need. Regards, Bogdan ALICOMPUTECH wrote: > Hello > Everyone > I want to replace the Asterisk (being used as a SIP Server for > registration, authentication and call routing) with OpenSIPS in OpenBTS > project, as i am planning to have an Asterisk cluster for dedicated services > and OpenSIPS will be forwarding the SIP calls to the cluster. > > OpenBTS implements GSM Um air interface and emulate the Mobile handsets as > the SIP endpoint and these handsets can be used as SIP extensions in a > SIP-capable server. > > I need to know the handoff and/or handover support in OpenSIPS as i am a > newbie to this wonderful open source solution. > > If there is any pointer and/or previously handoff/handover work done please > share, it will then ease my work > > thanks in advance > > Best Regards > > Bye > > > > > > _______________________________________________ > Users mailing list > Users@lists.opensips.org > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > -- Bogdan-Andrei Iancu OpenSIPS eBootcamp - 2nd of May 2011 OpenSIPS solutions and "know-how" _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users