Hi Saul, After enabling ICE for the account it worked.
Thanks, Liviu ________________________________ From: Saúl Ibarra Corretgé <s...@ag-projects.com> To: OpenSIPS users mailling list <users@lists.opensips.org> Sent: Fri, June 24, 2011 6:06:21 PM Subject: Re: [OpenSIPS-Users] ICE How-To Hi, On Jun 24, 2011, at 5:01 PM, Barsan Liviu wrote: > Hello, > > We were doing as suggested below and we got: > > 2011-06-24 17:50:17 Registered contact "sip:fmwkphsx@192.168.6.100:37289" for >sip:vm@80.97.X.X at 80.97.X.X:5060;transport=udp (expires in 600 seconds). > Detected NAT type: Blocked > vm@80.97.X.X> /rtp > Output of RTP statistics and ICE negotiation results on console is now >activated > vm@80.97.X.X> /audio bll@80.97.X.X > Initiating SIP session from 'sip:vm@80.97.X.X' to 'sip:bll@80.97.X.X' via >sip:80.97.X.X:5060;transport=udp... > Audio session established using "G722" codec at 16000Hz > Audio RTP endpoints 192.168.6.100:50000 <-> 80.97.X.X:50006 > Remote SIP User Agent is "Bria 3 release 3.2.1 stamp 62387" > 2011-06-24 17:51:18 RTP statistics: RTT=0 ms, packet loss=0.0%, jitter >RX/TX=0/0 ms > SIP session with sip:b...@80.97.xx ended by remote party > Session duration was 10 seconds > > From this is missing the ICE negotiation as you pasted below, this means that >we do not have a working ICE? > Did you enable ICE on the account you are using from sip-session? You need to use the sip-settings script for that. Also check the SIP trace and see if the SDP contains ICE data. -- Saúl Ibarra Corretgé AG Projects _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users