I can't think of anything else. Dear opensips team,
Hope you had a good flight-terminator :) Can you take a look at this please? Thanks, Ali Pey On Fri, Aug 10, 2012 at 12:05 PM, Diego Barberio < diego.barbe...@redmondsoftware.com> wrote: > Hi Ali,**** > > ** ** > > Thanks again for rour feedbak.**** > > Unfortunately that’s not the case. I’m attaching an example with the same > Via that works perfectly.**** > > ** ** > > Also, opensips works perfectly all day and only stops sending some OKs > during peak hour.**** > > ** ** > > Do you have any other idea?**** > > ** ** > > Thanks**** > > Diego**** > > ** ** > > *From:* users-boun...@lists.opensips.org [mailto: > users-boun...@lists.opensips.org] *On Behalf Of *Ali Pey > *Sent:* viernes, 10 de agosto de 2012 11:00 a.m. > > *To:* OpenSIPS users mailling list > *Subject:* Re: [OpenSIPS-Users] Opensips 1.6.4 doesn't send an OK > response under high load**** > > ** ** > > Hi Diego,**** > > ** ** > > I looked at your pcap file and I see that your second via has this:**** > > BC01.MBCSCR4.MSS.IMS.TIGO.COM.GT**** > > ** ** > > Is this a valid address? Maybe opensips can not resolve it so it ignores > the via. Have you tried adding it to /etc/hosts. **** > > ** ** > > Compare a good 200OK with one of these and see if there is any difference. > **** > > ** ** > > Regards,**** > > Ali Pey**** > > On Fri, Aug 10, 2012 at 9:20 AM, Diego Barberio < > diego.barbe...@redmondsoftware.com> wrote:**** > > Hi Ali,**** > > **** > > I removed set the debug flag to 0 and added the “–“ before the file path, > and I sill have the same issue.**** > > Is there any other thing I can try?**** > > **** > > Thanks**** > > Diego**** > > **** > > *From:* users-boun...@lists.opensips.org [mailto: > users-boun...@lists.opensips.org] *On Behalf Of *Ali Pey > *Sent:* jueves, 09 de agosto de 2012 03:30 p.m. > *To:* OpenSIPS users mailling list > *Subject:* Re: [OpenSIPS-Users] Opensips 1.6.4 doesn't send an OK > response under high load**** > > **** > > Hi Diego,**** > > **** > > Have you tried disabling the logging? That's usually the problem. Syslog > slows down opensips.**** > > **** > > Also in /etc/syslog.conf as '-' before the file path to make > it asynchronous. **** > > **** > > Regards,**** > > Ali Pey**** > > **** > > On Thu, Aug 9, 2012 at 2:19 PM, Diego Barberio < > diego.barbe...@redmondsoftware.com> wrote:**** > > Hello, > > I'm using opensips to forward incoming INVITEs to a set of 8 applications. > I'm using dispatcher module to achieve this. > During peak hour, opensips receives about 350 INVITEs per second, during > this period about 30 OK responses per second my application sends correctly > aren't forwarded by opensips. > > I've recompiled opensips so it can use more memory by modifing the config.h > file: > > #define PKG_MEM_POOL_SIZE 10*1024*1024 /*!< Used only if > PKG_MALLOC > is defined*/ > #define SHM_MEM_SIZE 320 /*!< Used if SH_MEM is > defined*/ > > > The incoming INVITEs come from UDP and TCP. > > > For each of the OK responses that aren't forwarded this entry appears in > the > messages file: > > usr/local/sbin/opensips[24554]: ERROR:core:forward_reply: no 2nd via found > in reply > > According to my research on the web this message means that the OK only has > one Via header, however this is not the case and the capture attached (made > on server which runs opensips) shows it. > > I've also tried to increase the log level, but it made opensips to work > slow > even in low traffic hours. > > > I run some test in my lab and opensips worked perfectly even under more > than > 350 INVITES per second, this problem only occurs in production > > I really don't know what else to do. > Could you help me to fix this issue or at least move on with the > investigation? > > Thanks > Diego > > _______________________________________________ > Users mailing list > Users@lists.opensips.org > http://lists.opensips.org/cgi-bin/mailman/listinfo/users**** > > **** > > > _______________________________________________ > Users mailing list > Users@lists.opensips.org > http://lists.opensips.org/cgi-bin/mailman/listinfo/users**** > > ** ** > > _______________________________________________ > Users mailing list > Users@lists.opensips.org > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > >
_______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
