Hi Binan, Thank's to Bogdan's patch I was able to run opensips 1.8.1. However, the problem with TCP under highload is still present.
Do you have any other ideas? Thanks Diego On Mon, Sep 10, 2012 at 4:59 PM, Diego Barberio < diego.barbe...@redmondsoftware.com> wrote: > Hi Binan, > > I tried upgrading to 1.8.1 but I'm having some issues I'm duscussin with > Bogdan on the following thread: > > http://lists.opensips.org/pipermail/users/2012-August/022764.html > > Thanks > Diego > > > On Mon, Sep 10, 2012 at 4:47 PM, Binan AL Halabi > <binanalhal...@yahoo.com>wrote: > >> hi Diego, >> >> 1- As you dont have state in database so you dont need to check that. >> 2- Why you dont upgrade to opensips 1.8.1 ? since it contains TCP fix. >> >> Regards. >> //Binan >> >> --- On *Mon, 9/10/12, Binan AL Halabi <binanalhal...@yahoo.com>* wrote: >> >> >> From: Binan AL Halabi <binanalhal...@yahoo.com> >> >> Subject: Re: [OpenSIPS-Users] FW: Opensips 1.6.4 doesn't send an OK >> response under high load >> To: "OpenSIPS users mailling list" <users@lists.opensips.org> >> Date: Monday, September 10, 2012, 12:19 PM >> >> >> If you have >> >> --- On *Mon, 9/10/12, Diego Barberio <diego.barbe...@redmondsoftware.com> >> * wrote: >> >> >> From: Diego Barberio <diego.barbe...@redmondsoftware.com> >> Subject: Re: [OpenSIPS-Users] FW: Opensips 1.6.4 doesn't send an OK >> response under high load >> To: "OpenSIPS users mailling list" <users@lists.opensips.org> >> Date: Monday, September 10, 2012, 10:51 AM >> >> Hi Binan, >> >> I understand what do you say with "play around TCP connection lifetime" >> however I don't get the part you say "check the database". I don't have any >> database, opensips is working without any DB. >> Which database are you talking about? >> >> Thanks >> Diego >> >> On Mon, Sep 10, 2012 at 1:37 PM, Binan AL Halabi <binanalhal...@yahoo.com >> > wrote: >> >> Hi Diego, >> play around TCP connection lifetime, you could find something. >> >> one thing more check the database during the busy hour and see if >> something expired. >> >> //Binan >> >> >> --- On *Mon, 9/10/12, Diego Barberio <diego.barbe...@redmondsoftware.com> >> * wrote: >> >> >> From: Diego Barberio <diego.barbe...@redmondsoftware.com> >> Subject: Re: [OpenSIPS-Users] FW: Opensips 1.6.4 doesn't send an OK >> response under high load >> To: "OpenSIPS users mailling list" <users@lists.opensips.org> >> Date: Monday, September 10, 2012, 6:39 AM >> >> >> Hi All, >> >> I'm still having this issue. However, I went on with my investigation and >> I've discovered that this issue only happens with my SIP over TCP >> connections (I have 10 TCP connections) >> I've upgraded to version: >> Server:: OpenSIPS (1.7.2-notls (i386/linux)) >> >> And the issue is still there. >> >> >> Do you have any other ideas? (Disabling TCP is not an option) >> >> Thanks >> Diego >> >> >> >> >> >> From: >> users-boun...@lists.opensips.org<http://mc/compose?to=users-boun...@lists.opensips.org> >> [mailto:users-boun...@lists.opensips.org<http://mc/compose?to=users-boun...@lists.opensips.org>] >> On Behalf Of Ali Pey >> Sent: viernes, 10 de agosto de 2012 01:30 p.m. >> To: OpenSIPS users mailling list >> Subject: Re: [OpenSIPS-Users] Opensips 1.6.4 doesn't send an OK response >> under high load >> >> >> >> I can't think of anything else. >> >> >> >> Dear opensips team, >> >> >> >> Hope you had a good flight-terminator :) >> >> Can you take a look at this please? >> >> >> >> Thanks, >> >> Ali Pey >> >> >> >> >> >> On Fri, Aug 10, 2012 at 12:05 PM, Diego Barberio >> <diego.barbe...@redmondsoftware.com<http://mc/compose?to=diego.barbe...@redmondsoftware.com>> >> wrote: >> >> Hi Ali, >> >> >> >> Thanks again for rour feedbak. >> >> Unfortunately that's not the case. I'm attaching an example with the same >> Via that works perfectly. >> >> >> >> Also, opensips works perfectly all day and only stops sending some OKs >> during peak hour. >> >> >> >> Do you have any other idea? >> >> >> >> Thanks >> >> Diego >> >> >> >> From: >> users-boun...@lists.opensips.org<http://mc/compose?to=users-boun...@lists.opensips.org> >> [mailto:users-boun...@lists.opensips.org<http://mc/compose?to=users-boun...@lists.opensips.org>] >> On Behalf Of Ali Pey >> Sent: viernes, 10 de agosto de 2012 11:00 a.m. >> >> >> To: OpenSIPS users mailling list >> Subject: Re: [OpenSIPS-Users] Opensips 1.6.4 doesn't send an OK response >> under high load >> >> >> >> Hi Diego, >> >> >> >> I looked at your pcap file and I see that your second via has this: >> >> BC01.MBCSCR4.MSS.IMS.TIGO.COM.GT >> >> >> >> Is this a valid address? Maybe opensips can not resolve it so it ignores >> the >> via. Have you tried adding it to /etc/hosts. >> >> >> >> Compare a good 200OK with one of these and see if there is any difference. >> >> >> >> Regards, >> >> Ali Pey >> >> On Fri, Aug 10, 2012 at 9:20 AM, Diego Barberio >> <diego.barbe...@redmondsoftware.com<http://mc/compose?to=diego.barbe...@redmondsoftware.com>> >> wrote: >> >> Hi Ali, >> >> >> >> I removed set the debug flag to 0 and added the "-" before the file path, >> and I sill have the same issue. >> >> Is there any other thing I can try? >> >> >> >> Thanks >> >> Diego >> >> >> >> From: >> users-boun...@lists.opensips.org<http://mc/compose?to=users-boun...@lists.opensips.org> >> [mailto:users-boun...@lists.opensips.org<http://mc/compose?to=users-boun...@lists.opensips.org>] >> On Behalf Of Ali Pey >> Sent: jueves, 09 de agosto de 2012 03:30 p.m. >> To: OpenSIPS users mailling list >> Subject: Re: [OpenSIPS-Users] Opensips 1.6.4 doesn't send an OK response >> under high load >> >> >> >> Hi Diego, >> >> >> >> Have you tried disabling the logging? That's usually the problem. Syslog >> slows down opensips. >> >> >> >> Also in /etc/syslog.conf as '-' before the file path to make it >> asynchronous. >> >> >> >> Regards, >> >> Ali Pey >> >> >> >> On Thu, Aug 9, 2012 at 2:19 PM, Diego Barberio >> <diego.barbe...@redmondsoftware.com<http://mc/compose?to=diego.barbe...@redmondsoftware.com>> >> wrote: >> >> Hello, >> >> I'm using opensips to forward incoming INVITEs to a set of 8 applications. >> I'm using dispatcher module to achieve this. >> During peak hour, opensips receives about 350 INVITEs per second, during >> this period about 30 OK responses per second my application sends >> correctly >> aren't forwarded by opensips. >> >> I've recompiled opensips so it can use more memory by modifing the >> config.h >> file: >> >> #define PKG_MEM_POOL_SIZE 10*1024*1024 /*!< Used only if >> PKG_MALLOC >> is defined*/ >> #define SHM_MEM_SIZE 320 /*!< Used if SH_MEM is >> defined*/ >> >> >> The incoming INVITEs come from UDP and TCP. >> >> >> For each of the OK responses that aren't forwarded this entry appears in >> the >> messages file: >> >> usr/local/sbin/opensips[24554]: ERROR:core:forward_reply: no 2nd via found >> in reply >> >> According to my research on the web this message means that the OK only >> has >> one Via header, however this is not the case and the capture attached >> (made >> on server which runs opensips) shows it. >> >> I've also tried to increase the log level, but it made opensips to work >> slow >> even in low traffic hours. >> >> >> I run some test in my lab and opensips worked perfectly even under more >> than >> 350 INVITES per second, this problem only occurs in production >> >> I really don't know what else to do. >> Could you help me to fix this issue or at least move on with the >> investigation? >> >> Thanks >> Diego >> >> _______________________________________________ >> Users mailing list >> Users@lists.opensips.org <http://mc/compose?to=Users@lists.opensips.org> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> >> >> >> >> _______________________________________________ >> Users mailing list >> Users@lists.opensips.org <http://mc/compose?to=Users@lists.opensips.org> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> >> >> >> >> _______________________________________________ >> Users mailing list >> Users@lists.opensips.org <http://mc/compose?to=Users@lists.opensips.org> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> >> >> >> >> >> -----Inline Attachment Follows----- >> >> >> _______________________________________________ >> Users mailing list >> Users@lists.opensips.org <http://mc/compose?to=Users@lists.opensips.org> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> >> >> _______________________________________________ >> Users mailing list >> Users@lists.opensips.org >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> >> >> >> -----Inline Attachment Follows----- >> >> _______________________________________________ >> Users mailing list >> Users@lists.opensips.org >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> >> >> -----Inline Attachment Follows----- >> >> _______________________________________________ >> Users mailing list >> Users@lists.opensips.org <http://mc/compose?to=Users@lists.opensips.org> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> >> >> _______________________________________________ >> Users mailing list >> Users@lists.opensips.org >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users >> >> >
_______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users