I'm running out of ideas .. My rtpproxy is fine
Oct 4 09:10:02 opensips /sbin/opensips[5019]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:127.0.0.1:7890> found, support for it enabled Oct 4 09:10:02 opensips /sbin/opensips[5020]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:127.0.0.1:7890> found, support for it enabled Oct 4 09:10:02 opensips /sbin/opensips[5018]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:127.0.0.1:7890> found, support for it enabled Oct 4 09:10:02 opensips /sbin/opensips[5022]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:127.0.0.1:7890> found, support for it enabled Oct 4 09:10:02 opensips /sbin/opensips[5023]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:127.0.0.1:7890> found, support for it enabled Oct 4 09:10:02 opensips /sbin/opensips[5017]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:127.0.0.1:7890> found, support for it enabled Oct 4 09:10:02 opensips /sbin/opensips[5016]: INFO:rtpproxy:rtpp_test: rtp proxy <udp:127.0.0.1:7890> found, support for it enabled and here is my opensips.cfg, ####### Global Parameters ######### debug=3 log_stderror=no log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the following lines to enable debugging */ #debug=6 #fork=no #log_stderror=yes /* uncomment the next line to enable the auto temporary blacklisting of not available destinations (default disabled) */ #disable_dns_blacklist=no /* uncomment the next line to enable IPv6 lookup after IPv4 dns lookup failures (default disabled) */ #dns_try_ipv6=yes /* comment the next line to enable the auto discovery of local aliases based on revers DNS on IPs */ auto_aliases=no listen=udp:###.###.###.###:5060 disable_tcp=yes db_default_url="mysql://opensips:opensipsrw@localhost /opensipsmysql://###:###@###/opensips" ####### Modules Section ######## #set module path mpath="/lib64/opensips/modules/" #### SIGNALING module loadmodule "signaling.so" #### StateLess module loadmodule "sl.so" #### Transaction Module loadmodule "tm.so" modparam("tm", "fr_timer", 5) modparam("tm", "fr_inv_timer", 30) modparam("tm", "restart_fr_on_each_reply", 0) modparam("tm", "onreply_avp_mode", 1) #### Record Route Module loadmodule "rr.so" /* do not append from tag to the RR (no need for this script) */ modparam("rr", "append_fromtag", 0) #### MAX ForWarD module loadmodule "maxfwd.so" #### SIP MSG OPerationS module loadmodule "sipmsgops.so" #### FIFO Management Interface loadmodule "mi_fifo.so" modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") modparam("mi_fifo", "fifo_mode", 0666) #### URI module loadmodule "uri.so" modparam("uri", "use_uri_table", 0) #### MYSQL module loadmodule "db_mysql.so" #### USeR LOCation module loadmodule "usrloc.so" modparam("usrloc", "nat_bflag", "NAT") modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://####:####@######/opensips") #### REGISTRAR module loadmodule "registrar.so" modparam("registrar", "tcp_persistent_flag", "TCP_PERSISTENT") modparam("registrar", "received_avp", "$avp(received_nh)") /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) #### ACCounting module loadmodule "acc.so" /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_cancels", 0) /* by default we do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) modparam("acc", "failed_transaction_flag", "ACC_FAILED") /* account triggers (flags) */ modparam("acc", "db_flag", "ACC_DO") modparam("acc", "db_missed_flag", "ACC_MISSED") modparam("acc", "db_url", "mysql://opensips:opensipsrw@localhost /opensipsmysql://###:###@###/opensips") #### AUTHentication modules loadmodule "auth.so" loadmodule "auth_db.so" modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://opensips:opensipsrw@localhost /opensipsmysql://###:###@###/opensips") modparam("auth_db", "load_credentials", "") #### ALIAS module loadmodule "alias_db.so" modparam("alias_db", "db_url", "mysql://opensips:opensipsrw@localhost /opensipsmysql://###:###@###/opensips") #### DOMAIN module loadmodule "domain.so" modparam("domain", "db_url", "mysql://opensips:opensipsrw@localhost /opensipsmysql://###:###@###/opensips") modparam("domain", "db_mode", 1) # Use caching modparam("auth_db|usrloc|uri", "use_domain", 1) #### DIALOG module loadmodule "dialog.so" modparam("dialog", "dlg_match_mode", 1) modparam("dialog", "default_timeout", 21600) # 6 hours timeout modparam("dialog", "db_mode", 2) modparam("dialog", "db_url", "mysql://opensips:opensipsrw@localhost /opensipsmysql://###:###@###/opensips") #### NAT modules loadmodule "nathelper.so" modparam("nathelper", "natping_interval", 10) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "received_avp", "$avp(received_nh)") modparam("nathelper", "natping_socket", "###.###.###.###:5060") modparam("nathelper", "sipping_from", "sip:pinger@###.###.###.###") modparam("nathelper", "sipping_method", "OPTIONS") loadmodule "rtpproxy.so" modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7890") #### DIALPLAN module loadmodule "dialplan.so" modparam("dialplan", "db_url", "mysql://opensips:opensipsrw@localhost /opensipsmysql://###:###@###/opensips") #### DYNAMMIC ROUTING module loadmodule "drouting.so" modparam("drouting", "db_url", "mysql://opensips:opensipsrw@localhost /opensipsmysql://###:###@###/opensips") ####### Routing Logic ######## # main request routing logic route{ force_rport(); if (nat_uac_test("23")) { if (is_method("REGISTER")) { fix_nated_register(); setbflag(NAT); } else { fix_nated_contact(); setflag(NAT); } } if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { # validate the sequential request against dialog if ( $DLG_status!=NULL && !validate_dialog() ) { xlog("In-Dialog $rm from $si (callid=$ci) is not valid according to dialog\n"); ## exit; } if (is_method("BYE")) { setflag(ACC_DO); # do accounting ... setflag(ACC_FAILED); # ... even if the transaction fails } else if (is_method("INVITE")) { # even if in most of the cases is useless, do RR for # re-INVITEs alos, as some buggy clients do change route set # during the dialog. record_route(); } if (check_route_param("nat=yes")) setflag(NAT); # route it out to whatever destination was set by loose_route() # in $du (destination URI). route(relay); } else { if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after # a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction -> # ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); if ( !(is_method("REGISTER") || is_from_gw() ) ) { if (is_from_local()) { # authenticate if from local subscriber # authenticate all initial non-REGISTER request that pretend to be # generated by local subscriber (domain from FROM URI is local) if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } if (!db_check_from()) { sl_send_reply("403","Forbidden auth ID"); exit; } consume_credentials(); # caller authenticated } else { # if caller is not local, then called number must be local if (!is_uri_host_local()) { send_reply("403","Rely forbidden"); exit; } } } # preloaded route checking if (loose_route()) { xlog("L_ERR", "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]"); if (!is_method("ACK")) sl_send_reply("403","Preload Route denied"); exit; } # record routing if (!is_method("REGISTER|MESSAGE")) record_route(); # account only INVITEs if (is_method("INVITE")) { # create dialog with timeout if ( !create_dialog("B") ) { send_reply("500","Internal Server Error"); exit; } setflag(ACC_DO); # do accounting } if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); route(relay); } # requests for my domain if (is_method("PUBLISH|SUBSCRIBE")) { sl_send_reply("503", "Service Unavailable"); exit; } if (is_method("REGISTER")) { fix_nated_register(); fix_nated_contact(); # authenticate the REGISTER requests if (!www_authorize("", "subscriber")) { www_challenge("", "0"); exit; } if (!db_check_to()) { sl_send_reply("403","Forbidden auth ID"); exit; } if ( 0 ) setflag(TCP_PERSISTENT); if (!save("location")) sl_reply_error(); exit; } if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # apply DB based aliases alias_db_lookup("dbaliases"); # apply transformations from dialplan table dp_translate("0","$rU/$rU"); if ($rU=~"^\+[1-9][0-9]+$") { if (!do_routing("0")) { send_reply("500","No PSTN Route found"); exit; } route(relay); exit; } # do lookup with method filtering if (!lookup("location","m")) { if (!db_does_uri_exist()) { send_reply("420","Bad Extension"); exit; } t_newtran(); t_reply("404", "Not Found"); exit; } if (isbflagset(NAT)) setflag(NAT); # when routing via usrloc, log the missed calls also setflag(ACC_MISSED); route(relay); } route[relay] { # for INVITEs enable some additional helper routes if (is_method("INVITE")) { if(nat_uac_test("127")){ # Usuario identificado como atras de nat xlog("Usuario atras de nat em handle nat"); fix_nated_contact(); } if (isflagset(NAT)) { rtpproxy_offer("ro"); } t_on_branch("per_branch_ops"); t_on_reply("handle_nat"); t_on_failure("missed_call"); } if (isflagset(NAT)) { add_rr_param(";nat=yes"); } if (!t_relay()) { send_reply("500","Internal Error"); }; exit; } branch_route[per_branch_ops] { xlog("new branch at $ru\n"); } onreply_route[handle_nat] { # if (nat_uac_test("1")) # fix_nated_contact(); # if ( isflagset(NAT) ) # rtpproxy_answer("ro"); # xlog("incoming reply\n"); # Recebemos resposta do pacote xlog("incoming reply\n"); # Verificamos aqui se esta requisicao possui SDP if(is_method("ACK") && has_body("application/sdp")){ # Atendemos no rtpproxy rtpproxy_answer(); }else if(has_body("application/sdp")){ # possuindo sdp vamos re-escrever a informacao #fix_nated_sdp("2"); rtpproxy_offer(); } # Vamos tentar identificar se o usuario esta atras de nat # executamos neste nivel pois aqui sera executado # no momento que recebemos resposta, assim garantimos # que em todos os casos manipularemos o nat if(nat_uac_test("127")){ # Usuario identificado como atras de nat xlog("Usuario atras de nat em handle nat"); fix_nated_contact(); } } failure_route[missed_call] { if (t_was_cancelled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply("404","Not found"); ## exit; ##} } local_route { if (is_method("BYE") && $DLG_dir=="UPSTREAM") { acc_db_request("200 Dialog Timeout", "acc"); } } Atenciosamente. Eng.° Rodrigo Ferreira ITIL v3 Certified 2013/10/4 Rodrigo Ferreira <rsferreir...@gmail.com> Yes I did Mike, and my SIP messages are ok. I will take a look at your tutorial. tks Atenciosamente. Eng.° Rodrigo Ferreira ITIL v3 Certified 2013/10/3 Mike Tesliuk <m...@ultra.net.br> Did you try to made some debug rodrigo ? maybe some rule is missing on your route script i made a tutorial over version 1.9 that you can check [portugues] http://opensips.com.br/wiki/index.php?title=Opensips_NAT_Script_com_RTPproxy [english] http://opensips.com.br/wiki/index.php?title=Oopensips_Nat_script_with_RTPPROXY_-_English 2013/10/3 Rodrigo Ferreira <rsferreir...@gmail.com> Hi guys, After a long time without using Opensips (almost a year) I tried to install the opensips 1.10 and everything went well BUT when I make a call, there's no audio, I know that is something because of NAT, but I have the nathelper and rtpproxy configuration on my opensips.cfg. There's anything else that I could take a look at? Thanks Atenciosamente. Eng.° Rodrigo Ferreira ITIL v3 Certified _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users