Ok, so I tried this timer thinking that it would shorten my PDD out to multiple carriers. But I guess this timer control when the call "answer"? So anything after INVITE (e.g. 100 trying, 180 ringing or 183) it will ignore? So if the timer set to 5 seconds, it will try that SIP route for 5 seconds UNTIL IT CONNECT.
So where is the timer that I can control the time between 100 trying and 180 (or any message after 100 trying)? I have multiple carriers (on outbound calls) that I LCR, some of the carrier have over 10 seconds PDD (which in this case, they give us a 100 trying and then maybe 10 seconds later, give us 180 ringing, thus 10 seconds of dead air). So I would like to control that problem by cutting the PDD short at OpenSIP where opensips can say that if is over XX seconds after 100 trying from carrier, send a timeout error code to the media gateway (in my case, asterisk) and have asterisk server try the next carrier. Thx in advance. -- View this message in context: http://opensips-open-sip-server.1449251.n2.nabble.com/fr-inv-timeout-tp7594633.html Sent from the OpenSIPS - Users mailing list archive at Nabble.com. _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users
