Hi Zahid,

When in the dialog is the INFO injected ? in the early stage ? or after the call is established ?

Best regards,

Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
http://www.opensips-solutions.com

On 18.12.2015 17:12, Zahid Mehmood wrote:
Hi Jeff,
Thanks for your response. >From what I understand from Cisco documentation, gateway seems to act that way when using H323 but, sadly, not for SIP. I will push Cisco about this.

Assuming the worst, Is there any thing I can try on the proxy side to get the desired results?

Regards,
--
Zahid


On Fri, Dec 18, 2015 at 9:44 AM, Jeff Pyle <[email protected] <mailto:[email protected]>> wrote:

    In Adtran TA900 series gateways (very Cisco-like) I'm able to
    configure the PRI interface to wait for the FACILITY message
    before sending the initial INVITE.  When the INVITE does leave the
gateway towards the proxy, it has full caller name information. Perhaps something like this is available on the Cisco. I hope so,
    because if not, you're going to have a difficult time integrating
    the INFO message.


    - Jeff


    On Thu, Dec 17, 2015 at 2:53 PM, Zahid Mehmood <[email protected]
    <mailto:[email protected]>> wrote:

        Hi,
           I am having trouble figuring out how to process the
        calling-name coming from the PRI. In my setup, PRI is
        connected to a Cisco media gateway which sends traffic to the
        proxy servers.  Calling name is not coming  in the ISDN setup
        message.  It is actually provided in a separate facility
        message [1].

        Cisco gateway processes this secondary messages and generates
        a INFO message. Polycom phone sends the 200 ok message but
        there is no change in the visible caller id.

        Does anyone have a working example or suggestion of how this
        is supposed to work?

        Invite:

        U 2015/12/17 14:20:31.215540 10.10.1.1:50975 -> 10.10.2.2:5060
        INVITE sip:[email protected]:5060
        <http://sip:[email protected]:5060> SIP/2.0.
        Via: SIP/2.0/UDP 10.10.1.1:5060;branch=z9hG4bK3A2284.
        Remote-Party-ID: "1112223333" <sip:[email protected]
        
<mailto:sip%[email protected]>>;party=calling;screen=yes;privacy=off.
        From: "1112223333" <sip:[email protected]
        <mailto:sip%[email protected]>>;tag=5745CCC-1C72.
        To: <sip:[email protected] <mailto:sip%[email protected]>>.
        Date: Thu, 17 Dec 2015 19:20:31 GMT.
        Call-ID: [email protected]
        <mailto:[email protected]>.
        Supported: 100rel,timer,resource-priority,replaces,sdp-anat.
        Min-SE:  1800.
        Cisco-Guid: 0311776101-2754220517-2148597785-1445067520.
        User-Agent: Cisco-SIPGateway/IOS-12.x.
        Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE,
        REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER.
        CSeq: 101 INVITE.
        Max-Forwards: 70.
        Timestamp: 1450380031.
        Contact: <sip:[email protected]:5060
        <http://sip:[email protected]:5060>>.
        Expires: 180.
        Allow-Events: telephone-event.
        Content-Type: application/sdp.
        Content-Disposition: session;handling=required.
        Content-Length: 279.
        .
        v=0.
        o=CiscoSystemsSIP-GW-UserAgent 3918 6190 IN IP4 10.10.1.1.
        s=SIP Call.
        c=IN IP4 10.10.1.1.
        t=0 0.
        m=audio 18854 RTP/AVP 0 18 101.
        c=IN IP4 10.10.1.1.
        a=rtpmap:0 PCMU/8000.
        a=rtpmap:18 G729/8000.
        a=fmtp:18 annexb=no.
        a=rtpmap:101 telephone-event/8000.
        a=fmtp:101 0-16.

        Invite messages:

        U 2015/12/17 14:20:31.546310 10.10.1.1:50975 -> 10.10.2.2:5060
        INFO sip:[email protected]:5060
        <http://sip:[email protected]:5060> SIP/2.0.
        Via: SIP/2.0/UDP 10.10.1.1:5060;branch=z9hG4bK3C1EC0.
        From: "1112223333" <sip:[email protected]
        <mailto:sip%[email protected]>>;tag=5745CCC-1C72.
        To: <sip:[email protected]
        <mailto:sip%[email protected]>>;tag=1768D8EC-CCDB1323.
        Date: Thu, 17 Dec 2015 19:20:31 GMT.
        Call-ID: [email protected]
        <mailto:[email protected]>.
        User-Agent: Cisco-SIPGateway/IOS-12.x.
        Max-Forwards: 70.
        Route: <sip:10.10.2.2;lr=on;ftag=5745CCC-1C72>.
        Timestamp: 1450380031.
        CSeq: 103 INFO.
        Contact: <sip:[email protected]:5060
        <http://sip:[email protected]:5060>>.
        Remote-Party-ID: "WIRELESS CALLER" <sip:[email protected]
        
<mailto:sip%[email protected]>>;party=calling;screen=no;privacy=off.
        Content-Length: 0.
        .


        Best Regards,

-- Zahid

        [1]
        
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/sip/configuration/15-mt/sip-config-15-mt-book/voi-sip-isdn.html#GUID-53D5C9AB-AAC4-4178-8158-0DAEFB5BC33E
        (figure 2 is close to what we are seeing)

        _______________________________________________
        Users mailing list
        [email protected] <mailto:[email protected]>
        http://lists.opensips.org/cgi-bin/mailman/listinfo/users



    _______________________________________________
    Users mailing list
    [email protected] <mailto:[email protected]>
    http://lists.opensips.org/cgi-bin/mailman/listinfo/users




_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
[email protected]
http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Reply via email to