Then what IP will I set there . We are running like this and there is no problem we are facing yet .
I cant put the public ip over there . If I will put the private ip then While forwarding HEP packets to any other IP it wont work . There is an option I will set only the port=5506 and so that it will work on all the interfaces (public and private ) . But giving the port , I am facing another problem . If there is more than one port then how will I give multiple ports ? *Thanks & Regards* *Sasmita Panda* *Network Testing and Software Engineer* *3CLogic , ph:07827611765* On Fri, Apr 29, 2016 at 7:20 PM, Bogdan-Andrei Iancu <bog...@opensips.org> wrote: > Hi Sasmita, > > OpenSIPS does not support 0.0.0.0 IP. You need to have an explicit IP > there. > > Regards, > > Bogdan-Andrei Iancu > OpenSIPS Founder and Developerhttp://www.opensips-solutions.com > > On 29.04.2016 11:46, Sasmita Panda wrote: > > Hi All , > > I am trying to integrate HOMER with opensips . I am using opensips as > my capture agent and forwarding the HEP packets to the capture server which > is kamailio . > > My opensips is running on AWS EMI . Where there is a public and a > private IP of the machine . So we used to writein the bellow format in the > opensips config . > > > *"listen=0.0.0.0:5506 <http://0.0.0.0:5506> AS 54.211.x.y:5506 " * > > Second part is the public ip , and that get used for publishing any > message out side . the first part is for internal use . > With this if I am trying to forward the HEP packet through siptrace module > , I had configured like bellow . > > #----load siptrcae module for trace node ------- > modparam("siptrace", "duplicate_uri", "sip:107.170.x.y:9060") > modparam("siptrace", "duplicate_with_hep", 1) > modparam("siptrace", "trace_to_database", 0) > modparam("siptrace", "trace_flag", 22) > modparam("siptrace", "trace_on", 1) > #HEPv2 == timestamp will be included to HEP header > modparam("siptrace", "hep_version", 2) > > In "107.170.x.y:9060" my kamailio is running . But when I am trying > to forward the packets its giving error . > > *"ERROR:siptrace:pipport2su: host <0.0.0.0> is not an IP" . * > > If I am changing my opensips config to *"listen=**54.211.x.y:5506 > AS **54.211.x.y:5506 " *then its running fine . > > > How will I get read of this error without changing my listen IP and > port line ? > Is there anything I can do in the siptrace module to use the public ip > only rather than using " *0.0.0.0* " ? > > > *Thanks & Regards* > *Sasmita Panda* > *Network Testing and Software Engineer* > *3CLogic , ph:07827611765* > > > _______________________________________________ > Users mailing > listUsers@lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users > > >
_______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users