Hi, Ehrny!
Did you try setting the private socket on the reply?
Best regards,
Răzvan Crainea
OpenSIPS Solutions
www.opensips-solutions.com
On 11/17/2016 01:00 AM, Ehrny wrote:
Dear Răzvan,
Thanks again for the prompt help. I was able to change the headers as
needed but I’m stuck with another problem(
I’ve got opensips with two Ethernet adapters, eth1 as a private and
another one eth0 as public. Opensips works fine when the call is
coming on the public eth0 and leaves opensips through the same public
adapter. (All the GWs are behind that public eth0 instead of one ).
The problem happens when the call comes in through the private eth1,
please see the drawing in attachment.
-sip1. After I’ve got invite from provider on the private eth1 , I
send it through the public eth0.
-sip2. I use force_send_socket(udp:PUBLIC_IP:PORT) for the call to be
able to pass through the opensips and come back from external GW
(x.x.82.139). I also change SIP Request's URI and use uac_replace_to
() to change these fields as needed.
-sip4. Opensips has got 180 Ringing from external GW (x.x.82.139)
-sip5. Opensips tries to send it back to originator (10.250.242.74)
which is behind private NIC eth0 (10.197.26.170)
the call can not be set up because I send reply from my public eth1
2016-11-16 18:56:14 : x.x.80.43:5060 -> 10.250.242.74:5060
SIP/2.0 *180*Ringing Via: SIP/2.0/UDP
10.250.242.74:5060;branch=*z9hG4bKqci5ec***Record-Route:
<sip:x.x.80.43;r2=on;lr;ftag=*2F81324631*;did=3a2.4667b68
<sip:x.x.80.43;r2=on;lr;ftag=2F81324631353641A405EA00;did=3a2.4667b68>>
Record-Route:
<sip:10.197.26.170;r2=on;lr;ftag=*2F81324631*;did=3a2.4667b68
<sip:10.197.26.170;r2=on;lr;ftag=2F81324631353641A405EA00;did=3a2.4667b68>>
From: sip:300...@domain.com;tag=*2F81324631*
<sip:300...@domain.com;tag=2F81324631353641A405EA00> To:
sip:300...@domain.com:5060;tag=231469dIr894
<sip:300...@domain.com:5060;tag=231469dIr894p0D461D0t66> Call-ID:
*020A3EA03A8@SFESIP4-id1-ext*CSeq: 1 INVITE Contact:
<sip:54321@x.x.82.139:5060>
I’m not sure if I do it right way because the packet (sip5) goes to
10.250.242.74 with the source ip of public eth0 and not the one it
should pass through to be able to come back.
What is the right way in my case to get the call through?
Thank you for all of your help,
Regards,
Ehrny
_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users