Hello Bogdan, Yes, I will do pull today and test again auto scaling feature.
Thank you. volga629 ----- Original Message ----- From: "Bogdan-Andrei Iancu" <bog...@opensips.org> To: "Slava Bendersky" <volga...@networklab.ca> Cc: "OpenSIPS users mailling list" <users@lists.opensips.org> Sent: Friday, May 10, 2019 5:02:48 AM Subject: Re: [OpenSIPS-Users] auto scaling Hi Slava, There were some fixes in the auto-scaling in the last weeks, could you confirm or not your issue against the latest 3.0 code ? Regards, Bogdan-Andrei Iancu OpenSIPS Founder and Developer https://www.opensips-solutions.com OpenSIPS Summit 2019 https://www.opensips.org/events/Summit-2019Amsterdam/ On 03/15/2019 12:47 PM, Slava Bendersky wrote: Hello Bogdan, Upscaling error is didn't show up any more in logs at least I didn't so it. Might need trigger bigger load. do you do auto-scaling only for TCP ? Our setup in most multi homed, as example public side TCP private side UDP Now, about the TCP downscaling - I guess you see as terminated by OpenSIPS the TCP conns anchored in the process that is terminated ? Yes, that how is look like end result that opensips start blocking TCP connections. If specific process handle sip registration via tcp and opensips trying close to down scale end point need send re register in order do not loose registration. Other wise it cause stale connections. Just close properly connection not enough I think. volga629 ----- Original Message ----- From: "Bogdan-Andrei Iancu" <bog...@opensips.org> To: "OpenSIPS users mailling list" <users@lists.opensips.org> , "Slava Bendersky" <volga...@networklab.ca> Sent: Thursday, March 14, 2019 1:45:20 PM Subject: Re: [OpenSIPS-Users] auto scaling Slava, What about the upscaling error you originally reported ? is there any way to reproduce it ? do you do auto-scaling only for TCP (no UDP,timer) ? Now, about the TCP downscaling - I guess you see as terminated by OpenSIPS the TCP conns anchored in the process that is terminated ? Is is a proper close of the connection ? or ? Regards, Bogdan-Andrei Iancu OpenSIPS Founder and Developer https://www.opensips-solutions.com OpenSIPS Summit 2019 https://www.opensips.org/events/Summit-2019Amsterdam/ On 03/14/2019 02:14 PM, Slava Bendersky wrote: <blockquote> Hello Bogdan, After we doing more testing with auto scaling we observed issue with TCP, where opensips try scale down the processes it tear down them and break TCP connections with end points and that cause blocked connection state where opensips stops process TCP connections. volga629 ----- Original Message ----- From: "Slava Bendersky" <volga...@networklab.ca> To: "Bogdan-Andrei Iancu" <bog...@opensips.org> Cc: "OpenSIPS users mailling list" <users@lists.opensips.org> Sent: Wednesday, March 13, 2019 12:21:14 AM Subject: Re: [OpenSIPS-Users] auto scaling I will do pull today. volga629 ----- Original Message ----- From: "Bogdan-Andrei Iancu" <bog...@opensips.org> To: "Slava Bendersky" <volga...@networklab.ca> Cc: "OpenSIPS users mailling list" <users@lists.opensips.org> Sent: Tuesday, March 12, 2019 4:52:06 AM Subject: Re: [OpenSIPS-Users] auto scaling Slava, Have you pulled my change on the improved log (just update from master) ? and post here the new output you get for the error. Thanks, Bogdan-Andrei Iancu OpenSIPS Founder and Developer https://www.opensips-solutions.com OpenSIPS Summit 2019 https://www.opensips.org/events/Summit-2019Amsterdam/ On 03/12/2019 05:51 AM, Slava Bendersky wrote: <blockquote> Hello Bogdan, My question how to calculate correctly tcp_workers udp_workers to properly assign with in auto scaling profile. Which parameters need use as base ? As example if vm 4GB memory up what will be max number for scale up processes and what should be value for tcp and udp workers. It message is appear in log on first attempt to fork in scale up. volga629 ----- Original Message ----- From: "Bogdan-Andrei Iancu" <bog...@opensips.org> To: "OpenSIPS users mailling list" <users@lists.opensips.org> , "Slava Bendersky" <volga...@networklab.ca> Sent: Monday, March 11, 2019 4:44:57 AM Subject: Re: [OpenSIPS-Users] auto scaling Hi Slava, Based on the OpenSIPS logs, did you get that error on the first forking attempt or sometime later after some number of new tcp processes forking ? More or less, my question is : what was the process creation/termination history before getting that bug log ? Also I just pushed a small commit to improve the date provided by the bug log. In regards to the "not clear how to calculate"...could you be specific ? Best regards, Bogdan-Andrei Iancu OpenSIPS Founder and Developer https://www.opensips-solutions.com OpenSIPS Summit 2019 https://www.opensips.org/events/Summit-2019Amsterdam/ On 03/10/2019 05:12 PM, Slava Bendersky wrote: <blockquote> Hello Everyone, Trying test auto scaling feature with following config auto_scaling_profile = PRF_SIP scale up to 24 on 70% for 4 cycles within 5 scale down to 4 on 20% for 8 cycles On box 4096 Mb memory and 4 virtual CPU Getting in log CRITICAL:core:fork_dynamic_tcp_process: #012>>> trying to fork one more TCP worker but no free slots in the TCP table#012#012It seems you have hit a programming bug.#012Please help us make OpenSIPS better by reporting it at https://github.com/OpenSIPS/opensips/issues Not clear how to calculate workers for tcp or udp tcp_workers=10 use_auto_scaling_profile PRF_SIP listen=udp:lan_ip:5060 use_auto_scaling_profile PRF_SIP [root@vprx00 ~]# opensips -V version: opensips 3.0.0-dev (x86_64/linux) flags: STATS: On, SHM_EXTRA_STATS, DISABLE_NAGLE, USE_MCAST, SHM_MMAP, PKG_MALLOC, QM_MALLOC, DBG_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll, sigio_rt, select. main.c compiled on 10:06:47 Mar 7 2019 with gcc 8 volga629 _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users </blockquote> _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users </blockquote> </blockquote>
_______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users