Ah, my setup was with a floating IP between servers. thanks Andy
On Tue, Jan 19, 2021 at 10:02 AM Kevin Wormington < kw...@missouri-telecom.com> wrote: > I’m not using a VIP and I have made some progress by setting a different > active tag on each node…then upon node failure setting the failed node's > tag to active on remaining node. This lets the re-invite pinging work, > etc. It’s almost there but the handling of the BYE…they are still sent to > the IP of the failed node even after re-invite pings so any in-progress > calls from the failed node are zombie when they hang up until the re-invite > ping times out (30 seconds). I found an article about initiating a > re-invite on the new node with something like "opensips-cli -x mi > dlg_send_sequential callid="442CB6C1-6005F8B80009DA08-FC731700" > mode=challenge body=outbound” but that either seems to terminate the call > immediately or say the dialog wasn’t found. > > > Thanks, > > Kevin > > On Jan 19, 2021, at 8:46 AM, Andy Dierlam <adier...@ptgi-ics.com> wrote: > > > > With dialog writing to db that both servers use. And same tag on both > - modparam("dialog", "dlg_sharing_tag", "vip1=active") > > had this working on opensips 2.4 > > > > thanks > > Andy > > > > > > On Mon, Jan 18, 2021 at 2:30 PM Kevin Wormington < > kw...@missouri-telecom.com> wrote: > > Hi, > > > > I've been attempting to get a two node active/active setup to work with > the v3.1 clusterer module sharing usrloc and dialog. The setup is fronted > by a proxy that handles all of the NAT/media so either OpenSIPS instance > can communicate directly with the user. > > > > What I have working so far: > > > > Registrations and calls work when sent to either node and if you stop > OpenSIPS on a node new calls work fine using the other node. > > > > What I can’t get to work: > > > > Calls that are already in progress to switch between nodes when one node > fails. > > > > > > I have messed around with various sharing tags…no tag, same tag, > different tags but haven’t had any luck. I’m guessing that I’m missing > something to trigger the remaining node to send re-invites. Has anyone > attempted this type of setup and have any ideas? > > > > Thanks, > > > > Kevin > > _______________________________________________ > > Users mailing list > > Users@lists.opensips.org > > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > _______________________________________________ > > Users mailing list > > Users@lists.opensips.org > > http://lists.opensips.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users@lists.opensips.org > http://lists.opensips.org/cgi-bin/mailman/listinfo/users >
_______________________________________________ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users