Hi Mario,
So you do both rtpengine ops and codecs ops in your cfg. This is a bit
of a receipt for disaster (as both are independently changing the SDP),
still not for a crash.
Could you try to run both codec ops, but without rtpengine, just to see
if ok ?
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
https://www.opensips-solutions.com
OpenSIPS eBootcamp 2021
https://opensips.org/training/OpenSIPS_eBootcamp_2021/
On 10/19/21 7:20 PM, Mario San Vicente wrote:
Hello Bogdan-Andrei,
I removed the following lines and it is working fine now. Not sure if
the issue was one or the combination of those 2 lines that made
opensips crash.
#codec_delete_re("PCMA|PCMU");
#codec_delete_except_re("speex");
The reason for using those lines was that opensips was doing
transcoding and after a while it stops doing the transcode, it just
was bypassing the original codec offer. This is also solved, the
problem is that the rtpengine_offer was not closing properly and then
i ran out of ports. The solution was to add rtpengine_delete(); at
the failure route.
Thank you all for your help!
Regards.
Mario
On Tue, Oct 19, 2021 at 2:01 AM Bogdan-Andrei Iancu
<bog...@opensips.org <mailto:bog...@opensips.org>> wrote:
Hi Mario,
What is the codec relate operation you do from the script? As it
looks it is crashing there.
Regards,
Bogdan-Andrei Iancu
OpenSIPS Founder and Developer
https://www.opensips-solutions.com <https://www.opensips-solutions.com>
OpenSIPS eBootcamp 2021
https://opensips.org/training/OpenSIPS_eBootcamp_2021/
<https://opensips.org/training/OpenSIPS_eBootcamp_2021/>
On 10/19/21 12:15 AM, Mario San Vicente wrote:
Thank you Giovany .
I got some info, but I'm not sure how to proceed.... Looks like
an issue assigning core vars.. Here the whole info in a txt file.
{rs = {s = 0x6dc2d4a3fa5df100 <error: Cannot access memory at
address 0x6dc2d4a3fa5df100>,
sval = {s = 0x100000002 <error: Cannot access memory at address
0x100000002>, len = -1510612476}
Thank your comments.
On Mon, Oct 18, 2021 at 12:39 PM Giovanni Maruzzelli
<gmar...@gmail.com <mailto:gmar...@gmail.com>> wrote:
On Mon, Oct 18, 2021 at 7:01 PM Mario San Vicente
<mrsanvice...@gmail.com <mailto:mrsanvice...@gmail.com>> wrote:
Hello Ovidiu,
That works for getting the core files. Then i run the
command bt full and got the following:
You must install the opensips-dbg debian package, it contains
the symbols, then restart opensips, then retake the core and
you'll see info in it.
-giovanni
--
Sincerely,
Giovanni Maruzzelli
OpenTelecom.IT
cell: +39 347 266 56 18
_______________________________________________
Users mailing list
Users@lists.opensips.org <mailto:Users@lists.opensips.org>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
<http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
--
Mario San Vicente
Cheers!
_______________________________________________
Users mailing list
Users@lists.opensips.org <mailto:Users@lists.opensips.org>
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
<http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
--
Mario San Vicente
Cheers!
_______________________________________________
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users