Dear dev sharma:
>(a) env MPIF90=mpif77 ./configure (after this command finally it gave mssg, parallel >envoirnment successful) Why not use mpif90 instead of mpif77 >piexec_localhost.localdomain: cannot connect to local mpd >(/tmp/mpd2.console_sushil); possible causes: >1. no mpd is running on this host >2. an mpd is running but was started without a "console" (-n option) >In case 1, you can start an mpd on this host with: > mpd & >and you will be able to run jobs just on this host. It is a problem of mpi, not QE. Simply follow the instruction: start an mpd on your host with "mpd" or you can try the following way: 0.down load mpich2-1.0.8.tar.gz on intelnet 1.enter directory /etc, then input "touch mpd.conf" using terminal. 2.input "vi mpd.conf" 3.add "MPD_SECRETWORD=XXXXX" (XXXXXX is your secrete number) 4.return to terminal and input mpdboot ____________________________________ Hui Wang School of physics, Nankai University, Tianjin, China -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.democritos.it/pipermail/pw_forum/attachments/20090810/b5a0d37e/attachment.htm