Thank you for the patches. The URL is actually correct: the redirection should be done on qe-forge.org, via a configuration file. Qe-forge is anyway going offline at the end of month, so it is not worth to try to fix it
Paolo On Fri, Feb 16, 2018 at 8:06 PM, Scott Brozell <s...@osc.edu> wrote: > Hi, > > This is not fixed in 6.2.1 because an incorrect url is still > produced in install/plugins_list. > Attached is a patch file for install/install_utils which > improves the error handling when an incorrect url is used; see 1. > Also attached is a patch file for install/plugins_list which > produces the correct url for gipaw; see 2. > > Unfortunately, compilation errors are then encountered using various > versions of intel compilers - 17 and 18. I am looking for help on > this, see 3. > > 1. > If an incorrect url is produced in install/plugins_list then > download_and_unpack in install/install_utils ignores errors from > gzip and tar. Target uncompress-gipaw in plugins_makefile finishes > without error and configuration for gipaw is started. > > install_utils.patch changes this behavior so that uncompress-gipaw > produces an error which terminates the gipaw build: > === > 0 -rw-r--r-- 1 me hpcsoft 2 Feb 13 19:50 qe-gipaw-6.2.tar.gz > > gzip: ../archive/qe-gipaw-6.2.tar.gz: not in gzip format > tar: This does not look like a tar archive > tar: Exiting with failure status due to previous errors > *** Unable to download http://files.qe-forge.org/ > index.php?file=qe-gipaw-6.2.tar.gz. > *** Verify that the url is correct. > make: *** [uncompress-gipaw] Error 1 > === > > 2. > An incorrect url is produced in install/plugins_list because > $(URL) is used: > === > URL=http://files.qe-forge.org/index.php?file= > ... > GIPAW=qe-gipaw-6.2 > GIPAW_URL=$(URL)$(GIPAW).tar.gz > === > This is corrected in plugins_list.patch. > > 3. > mpif90 -O2 -assume byterecl -g -traceback -nomodule -fpp -D__FFTW -D__MPI > -D__SCALAPACK -I/usr/local > /src/espresso/qe-6.2.1-intel-18.0.0//include -I/usr/local/src/espresso/qe- > 6.2.1-intel-18.0.0//FoX/finc > lude -I../include/ -I/usr/local/src/espresso/qe-6.2.1-intel-18.0.0/iotk/src > -I/usr/local/src/espresso/ > qe-6.2.1-intel-18.0.0/Modules > -I/usr/local/src/espresso/qe-6.2.1-intel-18.0.0/FFTXlib > -I/usr/local/src > /espresso/qe-6.2.1-intel-18.0.0/LAXlib -I/usr/local/src/espresso/qe- > 6.2.1-intel-18.0.0/KS_Solvers/CG - > I/usr/local/src/espresso/qe-6.2.1-intel-18.0.0/KS_Solvers/Davidson > -I/usr/local/src/espresso/qe-6.2.1- > intel-18.0.0/PW/src -I/usr/local/src/espresso/qe-6.2.1-intel-18.0.0/UtilXlib > -I. -c paw_gipaw.f90 > paw_gipaw.f90(157): error #6580: Name in only-list does not exist or is > not accessible. [SCAN_BEGIN] > use upf_module, only : scan_begin, scan_end > -----------------------------------^ > paw_gipaw.f90(157): error #6580: Name in only-list does not exist or is > not accessible. [SCAN_END] > use upf_module, only : scan_begin, scan_end > -----------------------------------------------^ > ... > > I did a little bit of investigation; my guess is that gipaw is out of > sync with the main code branch or maybe that there is a module include > mixup. Note that XSpectra/src/paw_gipaw.f90 uses read_upf_v1_module > instead of upf_module. > > thanks, > scott > > Scott Brozell, Ph.D. > Scientific Applications Group > Ohio Supercomputer Center > Columbus, OH 43212 > > > On Fri, Oct 27, 2017 at 11:07:58AM +0200, Davide Ceresoli wrote: > > please modify the file install/plugins_list as follows: > > GIPAW=qe-gipaw-6.2 > > GIPAW_URL=http://qe-forge.org/gf/download/frsrelease/245/ > 1119/qe-gipaw-6.2.tar.gz > > > > On 10/25/2017 09:56 AM, José Carlos Conesa wrote: > > > I installed this recent version of QE and, after completing make all, > when I do > > > make gipaw I find the following: > > > > > > configure: error: Cannot compile against this version of > Quantum-Espresso > > _______________________________________________ > Pw_forum mailing list > Pw_forum@pwscf.org > http://pwscf.org/mailman/listinfo/pw_forum > -- Paolo Giannozzi, Dip. Scienze Matematiche Informatiche e Fisiche, Univ. Udine, via delle Scienze 208, 33100 Udine, Italy Phone +39-0432-558216, fax +39-0432-558222
_______________________________________________ Pw_forum mailing list Pw_forum@pwscf.org http://pwscf.org/mailman/listinfo/pw_forum
