Dear Paolo, I take no responsibility to which unit cell is called what, I can never remember... Maybe my mind is too primitive to recognize the correct convention ;-)
I tried using ibrav=2 etc. for the 2-atom UC, but the results were (almost) identical to the ibrav=0 2-atom UC input: (Tensor for ibrav=2) 0.882 , 0.0 , 0.0 0.0 , 0.294 , -1.47 0.0 , -1.47 , 2.352 (Slight difference as I used a slightly different lattice parameter, but the shape of the tensor is identical) Hence not the one I would expect and see in the 8-atom UC. The reason I am using ibrav=0 is simply due to the way I generate my input files. As far as I understood it, it should not make a difference for the calculation, right? Thanks and all the best, Carl-Friedrich Am 21.09.2021 um 15:49 schrieb Paolo Giannozzi <p.gianno...@gmail.com<mailto:p.gianno...@gmail.com>>: Funny: I have always called "primitive" the 2-atom cell. "conventional" the 8-atom one. Anyway, the 2-atom diamond structure (fcc lattice) is simply ibrav=2, a=lattice parameter (A) or ibrav=2, celldm(1)=lattice parameter (a.u.) (lattice parameter=side of the cube) plus ATOMIC_POSITIONS (alat) Si 0.00 0.00 0.00 Si 0.25 0.25 0.25 or ATOMIC_POSITIONS (crystal) Si 0.00 0.00 0.00 Si 0.25 0.25 0.25 or any of the various possible ways of specifying atomic positions. If you do things properly you will find that the 2-atom and 8-atom cells give exactly the same results. Paolo On Mon, Sep 20, 2021 at 1:28 PM Schön, Carl-Friedrich <sch...@physik.rwth-aachen.de<mailto:sch...@physik.rwth-aachen.de>> wrote: Dear QE users, I have a question regarding the effective mass tensor, that I cannot seem to find the solution for. One could also rephrase this as a general question regarding the energy eigenvalues of k-points within different representations of unit-cells. I have used QE to calculate the bands/eigenvalues of Silicon. I have done this ones with the conventional unit cell (from materials project): Si2 1.0 3.8681383004362986 0.0 0.0 1.9340686210409386 3.349905532609194 0.0 1.9340686210409386 1.1166353539288019 3.1583211568194507 Si 2 Direct 0.250000000 0.250000000 0.250000000 0.000000000 0.000000000 0.000000000 As well as the primitive unitcell: Si8 1.0 5.4687280655 0.0000000000 0.0000000000 0.0000000000 5.4687280655 0.0000000000 0.0000000000 0.0000000000 5.4687280655 Si 8 Direct 0.250000000 0.750000044 0.250000000 -0.000000000 -0.000000000 0.500000000 0.250000000 0.250000000 0.750000044 -0.000000000 0.500000000 0.000000000 0.750000044 0.750000044 0.750000044 0.500000000 0.000000000 0.000000000 0.750000044 0.250000000 0.250000000 0.500000000 0.500000000 0.500000000 Let's look at the gamma point only at this point: I then constructed (using the emc.py script) a cartesian k-point grid around the Gamma point in order to get the effective mass tensor for the gamma point for each definition of the unit cell (Conduction Band). For the primitive, 8 atom unit cell, I get something like: -20.46496343 0.00000000 0.00000000 0.00000000 -20.46496343 0.00000000 0.00000000 0.00000000 -20.46496343 with all Eigenvalues being -20.465 (the tensors are given in units of 1/m*). As far as I am aware, this is what it should look like in terms of symmetry/degeneracy (the absolute values are not of interest at this point). If I look at the conventional, 2 atom unit cell, I get something like: 0.88345374 -0.00018375 -0.00018375 -0.00018375 0.11245293 -1.46684926 -0.00018375 -1.46684926 2.17115005 with non-degenerate eigenvalues of -0.65, 0.88, 2.93. I do not understand how this can be. I would understand that the tensors might look different due to different (absolute) orientation in k-space, but the eigenvalues should remain identical, should they not? Otherwise the physics would have changed. Especially in the example of the Gamma point above, I would have assumed to get the exact same tensor, as the effective masses are equal in all directions. Again, the dense grid around the Gamma point is constructed as cartesian cube in both cases. I therefore looked at the eigenvalues (energies in the conduction band) of the nscf calculation of said dense grid: Points that should be equivalent (and are indeed identical in the primitive 8 atom case) are not in the 2 atom case, e.g. E(0.01,0,0)!=E(0,0.01,0). I varied the spacing of the grid, but to no effect. The differences are also too big to be numeric errors: Position: 5.8000000E-03 0.0000000E+00 0.0000000E+00 Eigenenergies: 1 -5.811100 2 5.989300 3 5.997400 4 6.001900 5 8.550800 --> Conductino Band 6 8.552000 7 8.556000 8 9.102700 9 13.711000 10 13.716400 11 13.883000 12 17.181200 Position: 0.0000000E+00 -5.8500000E-03 -0.0000000E+00 Eigenenergies 1 -5.811100 2 5.988800 3 5.998800 4 6.000700 5 8.549800 -->Conduction Band 6 8.554400 7 8.554800 8 9.102800 9 13.710800 10 13.716400 11 13.883100 12 17.179600 Here the input I used for the scf calculation: &control calculation = 'scf' prefix='Si_mp-149_computed_Relax_6' tstress = .true. tprnfor = .true. pseudo_dir='/rwthfs/rz/cluster/home/NC' outdir='tmp' disk_io='low' wf_collect=.true. verbosity= 'high' / &system ibrav =0, nat=2 ntyp=1 ecutwfc = 100 ecutrho = 400 occupations = 'fixed' / &electrons mixing_beta = 0.2 conv_thr = 1.0d-10 / ATOMIC_SPECIES Si 28.086 Si.upf ATOMIC_POSITIONS {crystal} Si 0.25 0.25 0.25 Si 0.0 0.0 0.0 CELL_PARAMETERS 7.309722 0.0 0.0 3.65486 6.330404 0.0 3.65486 2.110135 5.968362 K_POINTS {automatic} 24 24 24 0 0 0 I am not sure what I am missing… In my understanding the results should be (generelly) independent of the definitino of the used unit-cell… Thank you and all the best, Carl-Friedrich Schön, PhD Student, RWTH Aachen University _______________________________________________ Quantum ESPRESSO is supported by MaX (www.max-centre.eu<http://www.max-centre.eu/>) users mailing list users@lists.quantum-espresso.org<mailto:users@lists.quantum-espresso.org> https://lists.quantum-espresso.org/mailman/listinfo/users -- Paolo Giannozzi, Dip. Scienze Matematiche Informatiche e Fisiche, Univ. Udine, via delle Scienze 206, 33100 Udine, Italy Phone +39-0432-558216, fax +39-0432-558222 _______________________________________________ Quantum ESPRESSO is supported by MaX (www.max-centre.eu<http://www.max-centre.eu>) users mailing list users@lists.quantum-espresso.org<mailto:users@lists.quantum-espresso.org> https://lists.quantum-espresso.org/mailman/listinfo/users
_______________________________________________ Quantum ESPRESSO is supported by MaX (www.max-centre.eu) users mailing list users@lists.quantum-espresso.org https://lists.quantum-espresso.org/mailman/listinfo/users