Try with lower solver tolerances with the Simulate/Confiure menu. Serge Steer Le 15/10/2015 18:53, Michael Greenish a écrit : > Hello, > > I am modeling an electrical circuit. I have a voltage across an > inductor being switched on the ground side. I am generating a pwm > using a sawtooth genartor as shown by the attached image. In my > circuit, my PWM switches at 50kHz. When if I set the sawtooth > generator period to > 0.025, the results look as expected on the > graphs. If the sawtooth generate period is < 0.025, the results are > flat; the system can't seem to calculate at that interval. The period > on the timer attached to the scope is 0.0001. > > I am only at 25ms, I need to get to 0.02 ms to match my real-life > circuit. Is there a limit of the system I am running into or do I > have a parameter wrong? > > Thanks, > > Mike Greenish > > > > _______________________________________________ > users mailing list > users@lists.scilab.org > http://lists.scilab.org/mailman/listinfo/users
_______________________________________________ users mailing list users@lists.scilab.org http://lists.scilab.org/mailman/listinfo/users