1000 messages !
Before printing, think about ENVIRONMENTAL responsabity -----Message d'origine----- De : users [mailto:users-boun...@lists.scilab.org] De la part de Rafael Guerra Envoyé : lundi 4 avril 2016 22:24 À : 'Users mailing list for Scilab' <users@lists.scilab.org> Objet : Re: [Scilab-users] "Smoothing" very localised discontinuities in (scilab: to exclusive) (scilab: to exclusive) (scilab: to exclusive) (scilab: to exclusive) curves. Burk. I am sending results as Plain Text with attachments. PS: the former pictures were embedded in a HTML-email which I could read fine. Rgds Rafael -----Original Message----- From: users [mailto:users-boun...@lists.scilab.org] On Behalf Of scilab.20.browse...@xoxy.net Sent: Monday, April 04, 2016 8:43 PM To: users@lists.scilab.org Subject: Re: [Scilab-users] "Smoothing" very localised discontinuities in (scilab: to exclusive) (scilab: to exclusive) (scilab: to exclusive) (scilab: to exclusive) curves. Rafael, > Buk., > > Tested the 3-point median filter solution on your data and results > seem Ok to> me: > > > ZOOM around 0.4-0.5: > > > Note that in my original example I had shifted (by 5e-3 one of my > curves for display purposes only, but no shift was applied the in > above displays) This reads as though you've attached some "displays" to your post, but nothng made it to me? > > Regards, > Rafael I will try and replicate it here; but my unfamiliarity with SciLab means it sometimes takes me a while to get these things to work :( Thanks, Buk _______________________________________________ users mailing list users@lists.scilab.org http://lists.scilab.org/mailman/listinfo/users