Hi Tobias, Great help. I will compile strongswan on raspberry and will revert to you.
Merci Christian Message d'origine De: Tobias Brunner Envoyé: jeudi 14 juillet 2016 11:23 À: Christian Klugesherz Cc: Users@lists.strongswan.org Objet: Re: [strongSwan] VPN with preshared Key between BB10 and Raspberry-Pi Hi Christian, > No I don't have any error on the startup I was not referring to the console output. Did you check the log? > !! Your strongswan.conf contains manual plugin load options for charon. > !! This is recommended for experts only, see > !! http://wiki.strongswan.org/projects/strongswan/wiki/PluginLoad Did you read the above document? > I guess that : eap-mschapv2 is not loaded, even I have require it in > strongswan.conf > How can I fix it ? It can't be loaded if it's not available. And according to `ipsec listall` MD4 and DES are both missing, which are required to implement the EAP-MSCHAPv2 protocol. So even if the plugin would be available it can't be used. These algorithms are provided by the `des` and `md4` plugins or one of the crypto wrappers i.e. `openssl` or `gcrypt` - none of these are currently loaded on your system. Neither is the eap-identity plugin, which has no other dependencies. If you built strongSwan yourself you have to rebuild it with the appropriate `--enable-...` options (run `make clean` before rebuilding). If you installed strongSwan from distribution packages you might have to install additional packages that provide these plugins. Regards, Tobias _______________________________________________ Users mailing list Users@lists.strongswan.org https://lists.strongswan.org/mailman/listinfo/users
