Hi, Please also send the content of /etc/ipsec.conf and/or /etc/swanctl.conf , /etc/swanctl/swanctl.conf , the file where you defined your site-to-site settings.
On Mon, Jan 13, 2020 at 10:27 AM [email protected] <[email protected]> wrote: > Also it ipsec.conf file > > # basic configuration > config setup > charondebug="all" > uniqueids=yes > strictcrlpolicy=no > > # connection to paris datacenter > conn totorum-to-camulodunum > authby=secret > left=%defaultroute > leftid=111.111.111.45 > leftsubnet=172.16.11.0/24 > right=222.222.222.210 > rightsubnet=172.16.15.0/24 > ike=aes256-sha2_256-modp1024! > esp=aes256-sha2_256! > keyingtries=0 > ikelifetime=1h > lifetime=8h > dpddelay=30 > dpdtimeout=120 > dpdaction=restart > auto=start > > On 1/13/20 4:15 PM, Felipe Arturo Polanco wrote: > > Hi, > > Please send us the following information: > > Strongswan configuration and > Output of: > iptables-save > ip xfrm policy > ip route show > ip rule show > ip address show > > Thanks, > > > On Mon, Jan 13, 2020 at 10:13 AM [email protected] <[email protected]> > wrote: > >> Hello, >> >> I am trying to set up a point-to-point VPN connection between two KVM >> hosts running Ubuntu 18.04 LTS. >> >> For struggling fro more then a week to make it work but without success. >> >> The tunnel seams to be running but I cannot make the connection between >> internal subenets. >> >> Can anyone tell me what iptables rules should I set? >> >> Thank you! >> >> Best regards! >> >> >>
