Michael Schwartzkopff wrote:
On 28.06.21 15:34, David H Durgee wrote:Michael Schwartzkopff wrote:On 28.06.21 13:44, David H Durgee wrote:I added that package and got further this time:(...) Jun 28 07:33:58 Z560 charon-nm: 06[ENC] parsed IKE_AUTH response 5 [ AUTH N(MOBIKE_SUP) N(NO_ADD_ADDR) N(FAIL_CP_REQ) N(TS_UNACCEPT) ] Jun 28 07:33:58 Z560 charon-nm: 06[IKE] authentication of 'durgeeenterprises.publicvm.com' with EAP successful Jun 28 07:33:58 Z560 charon-nm: 06[IKE] IKE_SA Durgee Enterprises, LLC[1] established between 192.168.1.114[dhdurgee]...108.31.28.59[durgeeenterprises.publicvm.com] Jun 28 07:33:58 Z560 charon-nm: 06[IKE] scheduling rekeying in 35606s Jun 28 07:33:58 Z560 charon-nm: 06[IKE] maximum IKE_SA lifetime 36206s Jun 28 07:33:58 Z560 charon-nm: 06[IKE] received FAILED_CP_REQUIRED notify, no CHILD_SA built Jun 28 07:33:58 Z560 charon-nm: 06[IKE] failed to establish CHILD_SA, keeping IKE_SAhi, Your responder (Server) seems to have some kind of configured poliy where the server waits for a configuration request from the client. But the clients does not ask for the config and the server terminates the connection. Please see the logs of you server, what exactly is missing. Perhaps the server wants to hand out an IP address to the client or something else. Mit freundlichen Grüßen,Looking at the log on the server I see:Jun 28 07:33:58 DG41TY charon: 10[IKE] authentication of 'dhdurgee' with EAP successful Jun 28 07:33:58 DG41TY charon: 10[IKE] authentication of 'durgeeenterprises.publicvm.com' (myself) with EAP Jun 28 07:33:58 DG41TY charon: 10[IKE] IKE_SA ikev2-vpn[61] established between 192.168.80.11[durgeeenterprises.publicvm.com]...172.58.190.234[dhdurgee] Jun 28 07:33:58 DG41TY charon: 10[IKE] IKE_SA ikev2-vpn[61] established between 192.168.80.11[durgeeenterprises.publicvm.com]...172.58.190.234[dhdurgee] Jun 28 07:33:58 DG41TY charon: 10[IKE] expected a virtual IP request, sending FAILED_CP_REQUIRED Jun 28 07:33:58 DG41TY charon: 10[IKE] traffic selectors 0.0.0.0/0 ::/0 === 192.168.1.114/32 inacceptable Jun 28 07:33:58 DG41TY charon: 10[IKE] failed to establish CHILD_SA, keeping IKE_SA Jun 28 07:33:58 DG41TY charon: 10[ENC] generating IKE_AUTH response 5 [ AUTH N(MOBIKE_SUP) N(NO_ADD_ADDR) N(FAIL_CP_REQ) N(TS_UNACCEPT) ] Jun 28 07:33:58 DG41TY charon: 10[NET] sending packet: from 192.168.80.11[4500] to 172.58.190.234[59726] (124 bytes) Jun 28 07:33:58 DG41TY charon: 14[NET] received packet: from 172.58.190.234[59726] to 192.168.80.11[4500] (76 bytes) Jun 28 07:33:58 DG41TY charon: 14[ENC] parsed INFORMATIONAL request 6 [ D ] Jun 28 07:33:58 DG41TY charon: 14[IKE] received DELETE for IKE_SA ikev2-vpn[61] Jun 28 07:33:58 DG41TY charon: 14[IKE] deleting IKE_SA ikev2-vpn[61] between 192.168.80.11[durgeeenterprises.publicvm.com]...172.58.190.234[dhdurgee] Jun 28 07:33:58 DG41TY charon: 14[IKE] deleting IKE_SA ikev2-vpn[61] between 192.168.80.11[durgeeenterprises.publicvm.com]...172.58.190.234[dhdurgee] Jun 28 07:33:58 DG41TY charon: 14[IKE] IKE_SA deleted Jun 28 07:33:58 DG41TY charon: 14[IKE] IKE_SA deleted Jun 28 07:33:58 DG41TY charon: 14[ENC] generating INFORMATIONAL response 6 [ ] Jun 28 07:33:58 DG41TY charon: 14[NET] sending packet: from 192.168.80.11[4500] to 172.58.190.234[59726] (76 bytes)Looking at my settings for the network connection shows IPv4 enabled expecting an address to be assigned automatically via DHCP with DNS and Routes set as automatic. The checkbox for "use this connection only for resources on its network" is NOT checked. The page for IPv6 is also set as automatic with the checkbox NOT checked. On the identity page none of the options are checked. Options are: "Request an inner IP address" "Enforce UDP encapsulation" "Use IP compression" All this should be defaults, as I only filled in the name, gateway, certificate, authentication(EAP), username and password fields. DaveI don't know about the manufacturer of your server side. but did you try to add leftsourceip=%config to your client (initiator) config? Also %config6 for IPv6 exists. See https://wiki.strongswan.org/projects/strongswan/wiki/VirtualIp Mit freundlichen Grüßen,
I am configuring this client using the strongswan plugin for network manager as noted in the subject line. I have attached the created network connection to this post for your inspection. I guess additional lines could be edited in manually if necessary, but now I am wondering if I am posting in the proper place. Is it possible this is a network-manager problem as opposed to strongswan?
Dave
[connection] id=Durgee Enterprises, LLC uuid=79c86094-b6e0-4819-afee-e6e427cdf4c8 type=vpn autoconnect=false permissions=user:dhdurgee:; [vpn] address=durgeeenterprises.publicvm.com certificate=/home/dhdurgee/Downloads/vpn_root_certificate.pem encap=no ipcomp=no method=eap password-flags=1 proposal=no user=dhdurgee virtual=no service-type=org.freedesktop.NetworkManager.strongswan [ipv4] dns-search= method=auto [ipv6] addr-gen-mode=stable-privacy dns-search= ip6-privacy=0 method=auto [proxy]
smime.p7s
Description: S/MIME Cryptographic Signature