I’m not exactly sure how but I was able to get it to work. I changed the destination numbers in all cases to be the same and now I am able to send messages using mmssend but im not getting the results I though I would. The problem with this now is that instead of receiving the actual MMS on the phone I get an SMS saying "You have received a multimedia message from 7327634633/TYPE=PLMN, go to XXX to view it."
How would I go about sending an actual MMS with a picture and message and everything or is this something that is not possible? Also I am using a Motorola RAZR as my GSM modem, could this be a cause of SMS going out instead of MMS going out? What type of modem is recommended for sending a few MMSs on a daily basis, I am using the razr as a test tool for the time being, would anybody be able to recommend some alternatives? Thanks Tom Obara _____ From: Hakan Lager [mailto:[EMAIL PROTECTED] Sent: Thursday, February 21, 2008 4:08 PM To: Thomas Obara Subject: Re: [Users] generic error when sending mms Hi, Did you use the same destination number in both cases with or without initiating 00/+ ? Mbuni has an option to send "short" notifications in one SMS does that works? / Hakan 2008/2/21, Thomas Obara <HYPERLINK "mailto:[EMAIL PROTECTED]"[EMAIL PROTECTED]>: I just tested sending MMS from my phone to another phone and it goes through alright. I have an unlimited plan on it so that shouldn't be a problem. I also tested sending sms again going through HYPERLINK "http://localhost:15002/cgi-bin/sendsms?username=kannel&password=kannel&from =7327634633&to=5165923683&text=this" \nhttp://localhost:15002/cgi-bin/sendsms?username=kannel&password=kannel&fro m=7327634633&to=5165923683&text=this is a test and it goes through no problem. Smsbox is saying that it was transfer successfully to bearerbox and then from bearerbox it's the AT command the brings back there error. _____ From: Hakan Lager [mailto:HYPERLINK "mailto:[EMAIL PROTECTED]" [EMAIL PROTECTED] Sent: Thursday, February 21, 2008 2:40 PM To: Thomas Obara Subject: Re: [Users] generic error when sending mms Hi, Do you have been able to send any SMS via kannel and your attached phone? This type of error often indicates that you have a prepaid account with no money left... / Hakan 2008/2/21, Thomas Obara <HYPERLINK "mailto:[EMAIL PROTECTED]" [EMAIL PROTECTED]>: Thanks Hakan, Your solution helped quite a bit with one problem, I found a few issues with the hostname and config, but now I seem to be running into another problem. I run: mmssend -t xxx -f xxx -m /media/ABC_/test.MMS /etc/kannel/mmsc.conf I look into the bearbox log and it keeps trying to run this: 2008-02-21 13:43:07 [29196] [6] DEBUG: AT2[/dev/ttyACM0]: --> AT+CMGS=128^M 2008-02-21 13:43:07 [29196] [6] DEBUG: AT2[/dev/ttyACM0]: <-- > 2008-02-21 13:43:07 [29196] [6] DEBUG: AT2[/dev/ttyACM0]: send command status: 1 2008-02-21 13:43:07 [29196] [6] DEBUG: AT2[/dev/ttyACM0]: --> 0051000B815161953286F30004A7720605040B8423F00F0603BEAF848C82986D6D73632D7166 373836382E332E783631332E3238008D9089178031373332373633343633332F545950453D50 4C4D4E008A808E020D088805810305785783687474703A2F2F6D6D73632F7166373836382E33 2E783631332E323840322F77783900 2008-02-21 13:43:11 [29196] [6] DEBUG: AT2[/dev/ttyACM0]: --> ^Z 2008-02-21 13:43:11 [29196] [6] DEBUG: AT2[/dev/ttyACM0]: <-- > 2008-02-21 13:43:11 [29196] [6] DEBUG: AT2[/dev/ttyACM0]: <-- ERROR 2008-02-21 13:43:11 [29196] [6] ERROR: AT2[/dev/ttyACM0]: Generic error: ERROR 2008-02-21 13:43:11 [29196] [6] DEBUG: AT2[/dev/ttyACM0]: send command status: -1 I feel this maybe an incorrect set up in my modems.conf but im not sure, if anyone can shed some light it would be greatly appreciated. Thanks Tom From: Hakan Lager [mailto:HYPERLINK "mailto:[EMAIL PROTECTED]" [EMAIL PROTECTED] Sent: Thursday, February 21, 2008 12:45 PM To: Thomas Obara Subject: Re: [Users] (no subject) Hi again, Forget to mention that the <your hostname> below must match. / Hakan mmsc.conf hostname = <your hostname> ' 2008/2/21, Hakan Lager <HYPERLINK "mailto:[EMAIL PROTECTED]" [EMAIL PROTECTED]>: mmsc.conf resolver-library = builtin:shell resolver-module-parameters = "/xxx/resolver.sh %t" resolver.sh echo <your hostname> / Hakan 2008/2/21, Thomas Obara <HYPERLINK "mailto:[EMAIL PROTECTED]" [EMAIL PROTECTED]>: Thanks for the quick response, I'm not sure what a resolver is. Where would I check that? Thanks, Tom _____ From: Hakan Lager [mailto:HYPERLINK "mailto:[EMAIL PROTECTED]" [EMAIL PROTECTED] Sent: Thursday, February 21, 2008 12:21 PM To: Thomas Obara Subject: Re: [Users] (no subject) Hi, Check your resolver for local numbers! / Hakan 2008/2/21, Thomas Obara <HYPERLINK "mailto:[EMAIL PROTECTED]" [EMAIL PROTECTED]>: Hi all, I am trying to set up mbuni to send mms. I have kannel set up and am able to confirm that I can send a sms to a phone and receive it no problem. When I try to send an mms doing "mmssend –t xxx –f xxx –m /media/abc_/test.MMS /etc/kannel/mmsc.conf" everything seems to go through ok but when I check the logs for mmsrelay I see INFO: Failed Global Queue MMS Send: from xxx/Type=PLMN to xxx/TYPE=PLMN, msgsize=3335: err=MMSC error: Don't know how to deliver to xxx/TYPE=PLMN ! I'm a newbie at both kannel and mbuni so any and all help is greatly appreciated. Thanks, Tom Obara _______________________________________________ Users mailing list HYPERLINK "mailto:[email protected]"; [EMAIL PROTECTED] HYPERLINK "http://lists.mbuni.org/mailman/listinfo/users"; \nhttp://lists.mbuni.org/mailman/listinfo/users No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.20.9/1291 - Release Date: 2/21/2008 11:05 AM
_______________________________________________ Users mailing list [email protected] http://lists.mbuni.org/mailman/listinfo/users
