On Wed, Aug 04, 2010 at 04:01:22AM +0200, Emmanuel CHANSON wrote:
> Is it possible to get an example of the if-up/down script that deal with
> ppp0.pid symlink so that Mbuni start to send MMS only after the ppp0
> connection is established?
You may try something like:
ip-up.sh:
IFNAME="$1"
LOCAL_IP="$4"
REMOTE_IP="$5"
IPPARAM="$6"
MMS_PROXY="your mmsc proxy ip"
ip route add to $MMS_PROXY dev $IFNAME
# routing has been set up, so:
ln -sf /var/run/ppp-${IPPARAM}.pid /var/run/ppp-for-mbuni.pidthen start pppd with: nodetach linkname mms ipparam mms and watch for it's pid in mbuni with something like: gprs-pid=cat /var/run/ppp-for-mbuni.pid|head -1 > > I notice that routing is also missing after the GPRS connection is > established that is why maybe mbuni POST nothing. > I need to set a "route add mmsproxyip@ gw ppp0" in order to reach > MMS-C Yes > > One question about the port parameter: > # Sample conf for MMSBox using a modem (MM1) > group = mmsc > id = modem > type = custom > custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat > /var/run/ppp0.pid|head -1;port=3130;mmsc-url= > http://mms.xxxxx.xx/mmsc;proxy=192.168.39.201;msisdn=100"; > mmsc-library = /usr/local/lib/libmmsbox_mm1. > > Is it the same to use "port=*3130*" and mmsc-url=http://mmscurl;pro...@ip:* > 3130* ? in the mmsbox.conf? > In my case I use port=3130 and does not set a ":port" on the proxy parameter > in mmsc-url No. port in settings is for other applications (like kannel) to communicate with mmsbox i.e. to trigger fetch actions. To specify your operator's mmsc port use :port in mmsc url or proxy settings depending on your MMSC settings. > > Regards & thanks for your help > > Emmanuel > > 2010/8/3 Piotr Isajew <p...@ex.com.pl> > > > On Tue, Aug 03, 2010 at 05:44:30PM +1100, Emmanuel CHANSON wrote: > > > One question: > > > > > > Does Mbuni will open and close GPRS connection each time it will have to > > > send a MMS ? or does it keep the connection always open ? > > > > It opens connection once there is something in queue and keeps it open > > until processing queue is empty. In reality to achieve this you should > > have max-send-threads slightly higher than amount of modems > > used. I.e. for one modem you shoud have 2 sending threads. With one > > thread it will open and close the connection for each message. > > > > > Is it a good idea to keep the GPRS connection open in case a lot of MMS > > have > > > to be send through modem? > > > > If you have lots to send you could write fake start-gprs script that > > does nothing and start persistent pppd connection outside of > > mbuni. That could evolve to "inteligent" start-gprs script that starts > > gprs connection once something appears on queue and stays open for > > some idle period while "cheating" mbuni for closing connection (mbuni > > kills pid given in pid file when it does not need gprs connection any more) > > > > > > > > > > I will check about if-up script. > > > > > > Others ideas maybe ? Just to confirm that it is a normal behavior and I > > > should not use "pppd call gprs" that lead to this behavior ? > > > > depends on your options. To be more specific using 'nodetach' option > > of pppd works better for me. > > > > > > > > BR, > > > > > > Emmanuel > > > > > > 2010/8/3 Piotr Isajew <p...@ex.com.pl> > > > > > > > You could also do this with proper if-up script. Mbuni tries to > > > > connect to MMS proxy when it sees pppd pid file. On other hand pid > > > > file is created _before_ interface IP and routing is set up. I solved > > > > this by symlinking ppp pid to some path in if-up after everything is > > > > set-up and making mbuni to look for a file on that path. > > > > > > > > On Tue, Aug 03, 2010 at 03:13:09PM +1100, Emmanuel CHANSON wrote: > > > > > Hello mbuni users and developers, > > > > > > > > > > Mbuni CVS 20100702 > > > > > Modem: Sagem My300x > > > > > > > > > > Purpose: Try to send MMS through MM1 GPRS modem but failed. > > > > > > > > > > I did not succeed to send a MMS through MM1 GPRS modem connection. > > > > > When sending a MMS through mmsbox interface I do see the pppd process > > > > > starting to connect to GPRS but fail the first time then succeed, but > > > > Mbuni > > > > > says: > > > > > > > > > > WARNING: mmsbox_mm1.c:375 <handle_mm1> [mmsbox-mm1] [n/a] *failed to > > > > start > > > > > GPRS connection. waiting... > > > > > * > > > > > Mbuni did not make a retry after the GPRS connection was > > established.* > > > > > > > > > > Find below: > > > > > *- mmsbox.log > > > > > - messages file (pppd message) > > > > > - mmmsbox.conf* > > > > > > > > > > Questions: > > > > > **- Did you ever experiment this situation ? > > > > > - Do I have to use another process instead of pppd ? > > > > > - Why Mbuni does not retry to send the MMS stored in pool ?** > > > > > **- Problem of configuration ? of mbuni or routing issue to contact > > > > MMS-C** > > > > > *- I saw an another post where a someone implement a delay (from Ben > > > > > Hardill):* > > > > > ------------------ > > > > > **In order to get it all working I had to add a small delay after > > > > starting > > > > > PPP as Mbuni was trying to send the post before the routing was all > > up > > > > and > > > > > running properly, so I have added the following just after the call > > to > > > > start > > > > > ppp in mmsbox_mm1.c > > > > > > > > > > if (mm1->gprs_on) > > > > > > > > > > pid = start_gprs(mm1->gprs_on, mm1->gprs_pid); > > > > > > > > > > gwthread_sleep(3); #<--- short pause to allow ppp to > > > > finish > > > > > setting up the connection > > > > > > > > > > if (pid< 0) { > > > > > > > > > > mms_warning(0, "mmsbox-mm1", NULL,"failed to start GPRS > > > > > connection. waiting...");* > > > > > *-------------------------- > > > > > * > > > > > Starting log: > > > > > mmsbox.log: > > > > > ------------------- > > > > > [r...@navette mbuni]# mmsbox /etc/mbuni/mmsbox.conf > > > > > 2010-08-03 14:31:44 [3327] [0] INFO: Debug_lvl = -1, log_file = > > <none>, > > > > > log_lvl = 0 > > > > > 2010-08-03 14:31:44 [3327] [0] INFO: Added logfile > > > > > `/var/log/mbuni/mmsbox.log' with level `0'. > > > > > 2010-08-03 14:31:44 [3327] [0] INFO: Started access logfile > > > > > `/var/log/mbuni/mmsbox-access.log'. > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 1 > > > > (mmsbox_cdr.c:(void > > > > > *)cdr_logger_func) > > > > > 2010-08-03 14:31:44 [3327] [0] INFO: HTTP: Opening server at port > > 10002. > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 2 > > > > > (gwlib/fdset.c:poller) > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 3 > > > > > (gwlib/http.c:server_thread) > > > > > 2010-08-03 14:31:44 [3327] [1] DEBUG: Thread 1 (mmsbox_cdr.c:(void > > > > > *)cdr_logger_func) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [0] INFO: mmsbox_cfg.c:578 > > > > <start_mmsc_from_conf> > > > > > [mmsbox] [n/a] Loaded MMSC[modem], allow=[(null)], deny=[(null)] > > > > > group_id=[modem] > > > > > 2010-08-03 14:31:44 [3327] [0] INFO: HTTP: Opening server at port > > 3130. > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 4 > > > > > (mmsbox_mm1.c:(gwthread_func_t *)handle_notify) > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 5 > > > > > (mmsbox_mm1.c:(gwthread_func_t *)handle_mm1) > > > > > 2010-08-03 14:31:44 [3327] [0] INFO: mmsbox_cfg.c:529 > > > > > <mmsbox_start_mmsc_conn> [mmsbox] [n/a] Startup for mmsc [modem] > > complete > > > > > 2010-08-03 14:31:44 [3327] [2] DEBUG: Thread 2 (gwlib/fdset.c:poller) > > > > maps > > > > > to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [0] WARNING: mmsbox_cfg.c:459 > > > > > <mms_load_mmsbox_settings> [mmsbox] [n/a] Empty or no password > > supplied > > > > for > > > > > admin port. All requests will be allowed! > > > > > 2010-08-03 14:31:44 [3327] [0] INFO: mmsbox.c:758 <main> [mmsbox] > > [n/a] > > > > > ---------------------------------------- > > > > > 2010-08-03 14:31:44 [3327] [0] INFO: mmsbox.c:759 <main> [mmsbox] > > [n/a] > > > > > Mbuni MMSBox version cvs-20100702 starting > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 6 > > > > > (mmsbox.c:(gwthread_func_t *)sendmms_func) > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 7 > > > > > (mmsbox.c:(gwthread_func_t *)mmsbox_outgoing_queue_runner) > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 8 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 9 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 10 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 11 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > > > > 2010-08-03 14:31:44 [3327] [0] DEBUG: Started thread 12 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > > > > 2010-08-03 14:31:44 [3327] [5] DEBUG: Thread 5 > > > > > (mmsbox_mm1.c:(gwthread_func_t *)handle_mm1) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [5] INFO: mmsbox_mm1.c:363 <handle_mm1> > > > > > [mmsbox-mm1] [n/a] handle_mm1 started > > > > > 2010-08-03 14:31:44 [3327] [4] DEBUG: Thread 4 > > > > > (mmsbox_mm1.c:(gwthread_func_t *)handle_notify) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [3] DEBUG: Thread 3 > > > > (gwlib/http.c:server_thread) > > > > > maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [10] DEBUG: Thread 10 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [9] DEBUG: Thread 9 > > > > (mms_queue.c:(gwthread_func_t > > > > > *)tdeliver) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [6] DEBUG: Thread 6 > > (mmsbox.c:(gwthread_func_t > > > > > *)sendmms_func) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [11] DEBUG: Thread 11 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [8] DEBUG: Thread 8 > > > > (mms_queue.c:(gwthread_func_t > > > > > *)tdeliver) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [7] DEBUG: Thread 7 > > (mmsbox.c:(gwthread_func_t > > > > > *)mmsbox_outgoing_queue_runner) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [12] DEBUG: Thread 12 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [6] DEBUG: Started thread 13 > > > > > (mmsbox.c:(gwthread_func_t *)dispatch_sendmms_recv) > > > > > 2010-08-03 14:31:44 [3327] [7] DEBUG: Started thread 14 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > > > > 2010-08-03 14:31:44 [3327] [6] DEBUG: Started thread 15 > > > > > (mmsbox.c:(gwthread_func_t *)dispatch_sendmms_recv) > > > > > 2010-08-03 14:31:44 [3327] [7] DEBUG: Started thread 16 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > > > > 2010-08-03 14:31:44 [3327] [6] DEBUG: Started thread 17 > > > > > (mmsbox.c:(gwthread_func_t *)dispatch_sendmms_recv) > > > > > 2010-08-03 14:31:44 [3327] [7] DEBUG: Started thread 18 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > > > > 2010-08-03 14:31:44 [3327] [6] DEBUG: Started thread 19 > > > > > (mmsbox.c:(gwthread_func_t *)dispatch_sendmms_recv) > > > > > 2010-08-03 14:31:44 [3327] [7] DEBUG: Started thread 20 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > > > > 2010-08-03 14:31:44 [3327] [18] DEBUG: Thread 18 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [6] DEBUG: Started thread 21 > > > > > (mmsbox.c:(gwthread_func_t *)dispatch_sendmms_recv) > > > > > 2010-08-03 14:31:44 [3327] [7] DEBUG: Started thread 22 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > > > > 2010-08-03 14:31:44 [3327] [16] DEBUG: Thread 16 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [13] DEBUG: Thread 13 > > > > (mmsbox.c:(gwthread_func_t > > > > > *)dispatch_sendmms_recv) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [20] DEBUG: Thread 20 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [22] DEBUG: Thread 22 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [17] DEBUG: Thread 17 > > > > (mmsbox.c:(gwthread_func_t > > > > > *)dispatch_sendmms_recv) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [19] DEBUG: Thread 19 > > > > (mmsbox.c:(gwthread_func_t > > > > > *)dispatch_sendmms_recv) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [21] DEBUG: Thread 21 > > > > (mmsbox.c:(gwthread_func_t > > > > > *)dispatch_sendmms_recv) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [15] DEBUG: Thread 15 > > > > (mmsbox.c:(gwthread_func_t > > > > > *)dispatch_sendmms_recv) maps to pid 3327. > > > > > 2010-08-03 14:31:44 [3327] [14] DEBUG: Thread 14 > > > > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 3327. > > > > > > > > > > > > > > > MMS send through MMS interface of mmsbox: > > > > > # lynx -dump " > > > > > > > > > > > http://localhost:10002/?username=tester&password=foobar&mmsc=modem&to=%2B87773502/TYPE=PLMN&subject=Test&text=MMS-1 > > > > > " > > > > > Accepted: Mbuni-msg.7610.x1.24.85 > > > > > > > > > > mmsbox.log generated after the MMS: > > > > > -------------------------------------------------------- > > > > > 2010-08-03 14:53:30 [2324] [3] DEBUG: HTTP: Creating HTTPClient for > > > > > `127.0.0.1'. > > > > > 2010-08-03 14:53:30 [2324] [3] DEBUG: HTTP: Created HTTPClient area > > > > > 0xb5700ab0. > > > > > 2010-08-03 14:53:30 [2324] [18] DEBUG: WSP: Mapping `text/plain', WSP > > 1.2 > > > > to > > > > > 0x0003. > > > > > 2010-08-03 14:53:30 [2324] [18] INFO: mmsbox.c:1366 > > <make_and_queue_msg> > > > > > [mmsbox] [n/a] MMSBox: Queued message from service [sendmms-user], > > > > [transid > > > > > [Mbuni-msg.7610.x1.24.85]: q-qf7610.1.x324.69 > > > > > 2010-08-03 14:53:30 [2324] [18] DEBUG: HTTP: Destroying HTTPClient > > area > > > > > 0xb5700ab0. > > > > > 2010-08-03 14:53:30 [2324] [18] DEBUG: HTTP: Destroying HTTPClient > > for > > > > > `127.0.0.1'. > > > > > 2010-08-03 14:53:30 [2324] [18] INFO: mmsbox.c:1613 > > > > <dispatch_sendmms_recv> > > > > > [mmsbox] [n/a] MMSBox.mmssend: u=tester, Queued [Accepted: > > > > > Mbuni-msg.7610.x1.24.85] > > > > > 2010-08-03 14:53:35 [2324] [7] DEBUG: Queued to thread 0 for > > > > > /var/spool/mbuni/mmsbox_outgoing/q/qf7610.1.x324.69, > > sendt=1280807610, > > > > > tnow=1280807615 > > > > > arg 0: pppd > > > > > arg 1: call > > > > > arg 2: mobile-auth > > > > > cat: /var/run/ppp0.pid: Aucun fichier ou dossier de ce type > > > > > 2010-08-03 14:53:40 [2324] [5] INFO: mmsbox_mm1.c:659 <start_gprs> > > > > > [mmsbox-mm1] [n/a] waiting for connection: 0, pid=2457 cpid=2457, > > > > > ifexited=1, exitstatus=0 > > > > > 2010-08-03 14:53:40 [2324] [5] WARNING: mmsbox_mm1.c:375 <handle_mm1> > > > > > [mmsbox-mm1] [n/a] *failed to start GPRS connection. waiting...* > > > > > > > > > > /var/log/messages: > > > > > ---------------------------- > > > > > Aug 3 14:53:35 navette kernel: PPP generic driver version 2.4.2 > > > > > Aug 3 14:53:35 navette pppd[2462]: pppd 2.4.5 started by admin, uid > > 0 > > > > > Aug 3 14:53:36 navette chat[2463]: abort on (BUSY) > > > > > Aug 3 14:53:36 navette chat[2463]: abort on (NO CARRIER) > > > > > Aug 3 14:53:36 navette chat[2463]: abort on (VOICE) > > > > > Aug 3 14:53:36 navette chat[2463]: abort on (NO DIALTONE) > > > > > Aug 3 14:53:36 navette chat[2463]: abort on (NO DIAL TONE) > > > > > Aug 3 14:53:36 navette chat[2463]: abort on (NO ANSWER) > > > > > Aug 3 14:53:36 navette chat[2463]: abort on (DELAYED) > > > > > Aug 3 14:53:36 navette chat[2463]: report (CONNECT) > > > > > Aug 3 14:53:36 navette chat[2463]: timeout set to 6 seconds > > > > > Aug 3 14:53:36 navette chat[2463]: send (ATQ0^M) > > > > > Aug 3 14:53:36 navette chat[2463]: expect (OK) > > > > > Aug 3 14:53:36 navette chat[2463]: ^M > > > > > Aug 3 14:53:36 navette chat[2463]: OK > > > > > Aug 3 14:53:36 navette chat[2463]: -- got it > > > > > Aug 3 14:53:36 navette chat[2463]: send (ATZ^M) > > > > > Aug 3 14:53:37 navette chat[2463]: timeout set to 3 seconds > > > > > Aug 3 14:53:37 navette chat[2463]: expect (OK) > > > > > Aug 3 14:53:37 navette chat[2463]: ^M > > > > > Aug 3 14:53:37 navette chat[2463]: ^M > > > > > Aug 3 14:53:37 navette chat[2463]: OK > > > > > Aug 3 14:53:37 navette chat[2463]: -- got it > > > > > Aug 3 14:53:37 navette chat[2463]: send (AT^M) > > > > > Aug 3 14:53:37 navette chat[2463]: expect (OK) > > > > > Aug 3 14:53:37 navette chat[2463]: ^M > > > > > Aug 3 14:53:40 navette chat[2463]: alarm > > > > > Aug 3 14:53:40 navette chat[2463]: send (AT^M) > > > > > Aug 3 14:53:40 navette chat[2463]: expect (OK) > > > > > Aug 3 14:53:40 navette chat[2463]: AT^M^M > > > > > Aug 3 14:53:40 navette chat[2463]: OK > > > > > Aug 3 14:53:40 navette chat[2463]: -- got it > > > > > Aug 3 14:53:40 navette chat[2463]: send (ATI^M) > > > > > Aug 3 14:53:40 navette chat[2463]: expect (OK) > > > > > Aug 3 14:53:40 navette chat[2463]: ^M > > > > > Aug 3 14:53:40 navette chat[2463]: ATI^M^M > > > > > Aug 3 14:53:40 navette chat[2463]: my300X GPRS^M > > > > > Aug 3 14:53:40 navette chat[2463]: ^M > > > > > Aug 3 14:53:40 navette chat[2463]: OK > > > > > Aug 3 14:53:40 navette chat[2463]: -- got it > > > > > Aug 3 14:53:40 navette chat[2463]: send (ATZ^M) > > > > > Aug 3 14:53:40 navette chat[2463]: expect (OK) > > > > > Aug 3 14:53:40 navette chat[2463]: ^M > > > > > Aug 3 14:53:40 navette chat[2463]: ATZ^M^M > > > > > Aug 3 14:53:40 navette chat[2463]: OK > > > > > Aug 3 14:53:40 navette chat[2463]: -- got it > > > > > Aug 3 14:53:40 navette chat[2463]: send (AT^M) > > > > > Aug 3 14:53:40 navette chat[2463]: expect (OK) > > > > > Aug 3 14:53:40 navette chat[2463]: ^M > > > > > Aug 3 14:53:43 navette chat[2463]: alarm > > > > > Aug 3 14:53:43 navette chat[2463]: send (AT^M) > > > > > Aug 3 14:53:43 navette chat[2463]: expect (OK) > > > > > Aug 3 14:53:43 navette chat[2463]: AT^M^M > > > > > Aug 3 14:53:43 navette chat[2463]: OK > > > > > Aug 3 14:53:43 navette chat[2463]: -- got it > > > > > Aug 3 14:53:43 navette chat[2463]: send (AT+CGDCONT=1,"IP","mms"^M) > > > > > Aug 3 14:53:43 navette chat[2463]: expect (OK) > > > > > Aug 3 14:53:43 navette chat[2463]: ^M > > > > > Aug 3 14:53:43 navette chat[2463]: AT+CGDCONT=1,"IP","mms"^M^M > > > > > Aug 3 14:53:43 navette chat[2463]: OK > > > > > Aug 3 14:53:43 navette chat[2463]: -- got it > > > > > Aug 3 14:53:43 navette chat[2463]: send (ATDT*99***1#^M) > > > > > Aug 3 14:53:43 navette chat[2463]: timeout set to 30 seconds > > > > > Aug 3 14:53:43 navette chat[2463]: expect (CONNECT) > > > > > Aug 3 14:53:43 navette chat[2463]: ^M > > > > > Aug 3 14:53:44 navette chat[2463]: ATDT*99***1#^M^M > > > > > Aug 3 14:53:44 navette chat[2463]: CONNECT > > > > > Aug 3 14:53:44 navette chat[2463]: -- got it > > > > > Aug 3 14:53:44 navette chat[2463]: send (^M) > > > > > Aug 3 14:53:44 navette pppd[2462]: Serial connection established. > > > > > Aug 3 14:53:44 navette pppd[2462]: Using interface ppp0 > > > > > Aug 3 14:53:44 navette pppd[2462]: Connect: ppp0 <--> /dev/ttyACM0 > > > > > Aug 3 14:53:44 navette pppd[2462]: PAP authentication succeeded > > > > > Aug 3 14:53:44 navette kernel: PPP Deflate Compression module > > registered > > > > > Aug 3 14:53:45 navette pppd[2462]: not replacing existing default > > route > > > > via > > > > > 192.168.0.1 > > > > > Aug 3 14:53:45 navette pppd[2462]: local IP address 10.152.149.196 > > > > > Aug 3 14:53:45 navette pppd[2462]: remote IP address 192.168.254.254 > > > > > > > > > > > > > > > and nothing after... > > > > > > > > > > # ifconfig: > > > > > eth1 Link encap:Ethernet HWaddr 00:16:E6:4E:0C:2B > > > > > inet adr:192.168.0.2 Bcast:192.168.0.255 > > Masque:255.255.255.0 > > > > > adr inet6: fe80::216:e6ff:fe4e:c2b/64 Scope:Lien > > > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > > > RX packets:1585 errors:0 dropped:0 overruns:0 frame:0 > > > > > TX packets:1354 errors:0 dropped:0 overruns:0 carrier:0 > > > > > collisions:0 lg file transmission:1000 > > > > > RX bytes:1349508 (1.2 MiB) TX bytes:283403 (276.7 KiB) > > > > > Interruption:20 > > > > > > > > > > lo Link encap:Boucle locale > > > > > inet adr:127.0.0.1 Masque:255.0.0.0 > > > > > adr inet6: ::1/128 Scope:Hôte > > > > > UP LOOPBACK RUNNING MTU:16436 Metric:1 > > > > > RX packets:177 errors:0 dropped:0 overruns:0 frame:0 > > > > > TX packets:177 errors:0 dropped:0 overruns:0 carrier:0 > > > > > collisions:0 lg file transmission:0 > > > > > RX bytes:12005 (11.7 KiB) TX bytes:12005 (11.7 KiB) > > > > > > > > > > ppp0 Link encap:Protocole Point-à-Point > > > > > inet adr:10.152.149.196 P-t-P:192.168.254.254 > > > > > Masque:255.255.255.255 > > > > > UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 > > > > > RX packets:4 errors:0 dropped:0 overruns:0 frame:0 > > > > > TX packets:5 errors:0 dropped:0 overruns:0 carrier:0 > > > > > collisions:0 lg file transmission:3 > > > > > RX bytes:58 (58.0 b) TX bytes:76 (76.0 b) > > > > > > > > > > # netstat -rn > > > > > Table de routage IP du noyau > > > > > Destination Passerelle Genmask Indic MSS Fenêtre > > irtt > > > > > Iface > > > > > 192.168.254.254 0.0.0.0 255.255.255.255 UH 0 0 > > 0 > > > > > ppp0 > > > > > 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 > > 0 > > > > > eth1 > > > > > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 > > 0 > > > > > eth1 > > > > > 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 > > 0 > > > > > eth1 > > > > > > > > > > > > > > > mmsbox.conf: > > > > > --------------------- > > > > > [r...@navette ~]# cat /etc/mbuni/mmsbox.conf > > > > > group = core > > > > > log-file = /var/log/mbuni/mmsbox.log > > > > > access-log = /var/log/mbuni/mmsbox-access.log > > > > > log-level = 0 > > > > > > > > > > group = mbuni > > > > > storage-directory = /var/spool/mbuni > > > > > max-send-threads = 5 > > > > > maximum-send-attempts = 50 > > > > > default-message-expiry = 360000 > > > > > queue-run-interval = 5 > > > > > send-attempt-back-off = 300 > > > > > sendmms-port = 10002 > > > > > > > > > > #group = mmsc > > > > > #id = local > > > > > #mmsc-url = http://mbuni:t...@localhost:1982/soap > > > > > #incoming-username = user > > > > > #incoming-password = pass > > > > > #incoming-port = 12345 > > > > > #type = soap > > > > > > > > > > # Sample conf for MMSBox using a modem (MM1) > > > > > group = mmsc > > > > > id = modem > > > > > type = custom > > > > > custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat > > > > > /var/run/ppp0.pid|head -1;port=3130;mmsc-url= > > > > > http://mms.xxxxx.xx/mmsc;proxy=192.168.39.201;msisdn=100"; > > > > > mmsc-library = /usr/local/lib/libmmsbox_mm1.so > > > > > > > > > > > > > > > group = mms-service > > > > > name = me > > > > > post-url = > > > > > http://localhost/~bagyenda/test-mbuni.php<http://localhost/%7Ebagyenda/test-mbuni.php> > > <http://localhost/%7Ebagyenda/test-mbuni.php> > > > > <http://localhost/%7Ebagyenda/test-mbuni.php> > > > > > catch-all = true > > > > > http-post-parameters = fx=true&images[]=%i&text[]=%t&skip=1 > > > > > accept-x-mbuni-headers = true > > > > > pass-thro-headers = X-NOKIA-MMSC-Charging,X-NOKIA-MMSC-Charged-Party > > > > > keyword = test > > > > > omit-empty = no > > > > > suppress-reply = true > > > > > service-code = regular > > > > > > > > > > group = mms-service > > > > > name = fullmessage > > > > > get-url = http://localhost/images/apache_pb.gif > > > > > # http-post-parameters = fx=true&image=%i&text=%t > > > > > accept-x-mbuni-headers = true > > > > > keyword = thixs > > > > > > > > > > group = send-mms-user > > > > > username = tester > > > > > password = foobar > > > > > faked-sender = 100 > > > > > > > > > > > > > > > > > > > > Regards, > > > > > > > > > > -- > > > > > Emmanuel > > > > > > > > > _______________________________________________ > > > > > Users mailing list > > > > > Users@mbuni.org > > > > > http://lists.mbuni.org/mailman/listinfo/users > > > > > > > > _______________________________________________ > > > > Users mailing list > > > > Users@mbuni.org > > > > http://lists.mbuni.org/mailman/listinfo/users > > > > > > > > > > > > > > > > -- > > > Emmanuel > > > > > > CHANSON Emmanuel > > > Mobile Nouvelle-Calédonie: +687.77.35.02 > > > Mobile France: +33 (0) 6.68.03.89.56 > > > @email : emmanuelchan...@gmail.com > > > > > _______________________________________________ > > > Users mailing list > > > Users@mbuni.org > > > http://lists.mbuni.org/mailman/listinfo/users > > > > _______________________________________________ > > Users mailing list > > Users@mbuni.org > > http://lists.mbuni.org/mailman/listinfo/users > > > > > > -- > Emmanuel > > CHANSON Emmanuel > Mobile Nouvelle-Calédonie: +687.77.35.02 > Mobile France: +33 (0) 6.68.03.89.56 > @email : emmanuelchan...@gmail.com > _______________________________________________ > Users mailing list > Users@mbuni.org > http://lists.mbuni.org/mailman/listinfo/users
pgpXlfIr4mTGN.pgp
Description: PGP signature
_______________________________________________ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users
