What is you custom setting in mmsbox.conf? It seems you keep ppp0.pid and didn't manage using ppp0-mbuni.pid.
Mbuni wait until this ppp0.pid file is created before sending the MMS BUT Mbuni doesn't wait that the routing is done to reach MMSC so using ip-up script you should create a ppp0-mbuni.pid lynk (symlink to ppp0.pid) This symlink is created as soon as routing is done in ip-up script * mmsbox.conf in custom settings: ------------------------------------------------ gprs-pid=cat /var/run/ppp0-mbuni.pid|head -1* ip-down should contain the command to remove this symlink when ppp0 connection is closed Emmanuel 2010/8/25 Michel TOKO <tokomic...@gmail.com> > This is a part of the log. If you need more than this please let me know. > > 2010-08-25 08:17:34 [6800] [5] INFO: mmsbox_mm1.c:659 <start_gprs> > [mmsbox-mm1] [n/a] waiting for connection: 0, pid=7470 cpid=0, ifexited=1, > exitstatus=5 > cat: /var/run/ppp0.pid: No such file or directory > 2010-08-25 08:17:39 [6800] [5] INFO: mmsbox_mm1.c:659 <start_gprs> > [mmsbox-mm1] [n/a] waiting for connection: 1, pid=7470 cpid=0, ifexited=1, > exitstatus=5 > cat: /var/run/ppp0.pid: No such file or directory > 2010-08-25 08:17:44 [6800] [5] INFO: mmsbox_mm1.c:659 <start_gprs> > [mmsbox-mm1] [n/a] waiting for connection: 2, pid=7470 cpid=0, ifexited=1, > exitstatus=5 > chat: Aug 25 08:17:47 CONNECT 115200 > Serial connection established. > using channel 38 > Using interface ppp0 > Connect: ppp0 <--> /dev/ttyUSB0 > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x600b2141> <pcomp> > <accomp>] > rcvd [LCP ConfRej id=0x1 <magic 0x600b2141>] > sent [LCP ConfReq id=0x2 <asyncmap 0x0> <pcomp> <accomp>] > rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <pcomp> <accomp>] > 2010-08-25 08:17:49 [6800] [5] INFO: mmsbox_mm1.c:379 <handle_mm1> > [mmsbox-mm1] [n/a] start_gprs returned PID: 7470 > 2010-08-25 08:17:49 [6800] [5] DEBUG: WSP: Mapping `image/gif', WSP 1.2 to > 0x001d. > rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth > pap>] > sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <pcomp> <accomp> <auth > pap>] > sent [PAP AuthReq id=0x1 user="65eideas" password=<hidden>] > rcvd [PAP AuthAck id=0x1 "Welcome!"] > Remote message: Welcome! > PAP authentication succeeded > sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>] > sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 > 0.0.0.0>] > rcvd [IPCP ConfReq id=0x1 <addr 192.168.111.111>] > sent [IPCP ConfAck id=0x1 <addr 192.168.111.111>] > rcvd [LCP ProtRej id=0x26 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00] > Protocol-Reject for 'Compression Control Protocol' (0x80fd) received > rcvd [IPCP ConfNak id=0x1 <addr 10.237.205.147> <ms-dns1 165.21.83.88> > <ms-dns3 165.21.100.88>] > sent [IPCP ConfReq id=0x2 <addr 10.237.205.147> <ms-dns1 165.21.83.88> > <ms-dns3 165.21.100.88>] > rcvd [IPCP ConfAck id=0x2 <addr 10.237.205.147> <ms-dns1 165.21.83.88> > <ms-dns3 165.21.100.88>] > local IP address 10.237.205.147 > > remote IP address 192.168.111.111 > primary DNS address 165.21.83.88 > secondary DNS address 165.21.100.88 > *Script /etc/ppp/ip-up started (pid 7498)* > *Script /etc/ppp/ip-up finished (pid 7498), status = 0x1 > 2010-08-25 08:20:58 [6800] [5] ERROR: mmsbox_mm1.c:628 <fetch_content> > [mmsbox-mm1] [n/a] failed to fetch/post content: couldn't connect to host* > 2010-08-25 08:20:58 [6800] [5] DEBUG: Octet string at 0xb4c0ba68: > 2010-08-25 08:20:58 [6800] [5] DEBUG: len: 0 > 2010-08-25 08:20:58 [6800] [5] DEBUG: size: 0 > 2010-08-25 08:20:58 [6800] [5] DEBUG: immutable: 0 > 2010-08-25 08:20:58 [6800] [5] DEBUG: Octet string dump ends. > *2010-08-25 08:20:58 [6800] [5] ERROR: mmsbox_mm1.c:499 <handle_mm1> > [mmsbox-mm1] [n/a] Sending failed: (none), (none)!* > 2010-08-25 08:20:58 [6800] [5] INFO: mmsbox_mm1.c:524 <handle_mm1> > [mmsbox-mm1] [n/a] GPRS turned off returned: 0 > 2010-08-25 08:20:58 [6800] [20] INFO: mmsbox_mm1.c:345 <send_msg> > [mmsbox-mm1] [n/a] sent message, type=m-send-req, result=(none) > 2010-08-25 08:20:58 [6800] [20] INFO: bearerbox.c:1519 <sendMsg> [MM7] > [n/a] Retry later MMSBox Outgoing Queue MMS Send: From +xxxxxxxxx/TYPE=PLMN, > to xxxxxxxxxx/TYPE=PLMN, msgsize=5517: msgid=[N/A] > Terminating on signal 15 > > Connect time 3.2 minutes. > *Sent 300 bytes, received 676 bytes.* > Script /etc/ppp/ip-down started (pid 7507) > sent [LCP TermReq id=0x3 "User request"] > Script /etc/ppp/ip-down finished (pid 7507), status = 0xff > rcvd [LCP TermAck id=0x3 "User request"] > Connection terminated. > > > > > > On 25 August 2010 00:36, Emmanuel CHANSON <emmanuelchan...@gmail.com>wrote: > >> You can reach your MMS-C as you successfully open a telnet connection on >> port 8080 so this is something else. >> >> Try to remove the smil part and send just a text? >> >> >> $url=$path."?username=$username&password=$password&to=xxxxxxxxxx&subject=MBUNI&text=test"; >> >> Other thing >> Try to check your logs to see if the fetch error happens before ppp0 >> connection is up? >> Maybe Mbuni try to send the MMS before the ppp0 connection and/or routing >> is done in order to reach MMS-C. >> >> Check also that /var/run/ppp0-mbuni.pid is correclty removed after each >> connection close. >> Try to delete it by hand before a test if it was present. >> >> Mbuni wait until the ppp0-mbuni.pid file is created (by ip-up script) and >> then will send MMS. >> >> Post your full logs in case of problem. >> >> >> Emmanuel >> >> 2010/8/25 Michel TOKO <tokomic...@gmail.com> >> >>> telnet 165.21.42.84 8080 >>> Trying 165.21.42.84... >>> Connected to 165.21.42.84 (165.21.42.84). >>> Escape character is '^]'. >>> >>> >>> posting the mms, i run a php script : >>> >>> >>> $url=$path."?username=$username&password=$password&to=xxxxxxxxxx&subject=MBUNI&smil=$smil"; >>> >>> where $path= http://xxx.xxx.xxx.xxx:10001/cgi-bin/sendmms and $smil is a >>> simple smil file contaning a gif image >>> >>> thanks >>> >>> >>> On 24 August 2010 23:59, Emmanuel CHANSON <emmanuelchan...@gmail.com>wrote: >>> >>>> Yes it should be ok >>>> >>>> Try to reach your MMS-C using *"telnet 165.21.42.84 8080"* when ppp0 is >>>> up and rounting is done. >>>> Or do this test with mbuni stop and launch ppd by hand *'pppd call >>>> mobile-auth'* >>>> >>>> If you succeed then maybe you post a bad MMS. What is the command you >>>> run to post a MMS to Mbuni ? >>>> >>>> Emmanuel >>>> >>>> 2010/8/25 Michel TOKO <tokomic...@gmail.com> >>>> >>>>> sorry, >>>>> >>>>> >>>>> netstat -rn >>>>> Kernel IP routing table >>>>> Destination Gateway Genmask Flags MSS Window >>>>> irtt Iface >>>>> 192.168.111.111 0.0.0.0 255.255.255.255 UH 0 0 >>>>> 0 ppp0 >>>>> 165.21.42.84 0.0.0.0 255.255.255.255 UH 0 0 >>>>> 0 ppp0 >>>>> xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 0 >>>>> 0 eth0 >>>>> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 >>>>> 0 eth0 >>>>> 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG 0 0 >>>>> 0 eth0 >>>>> >>>>> is it normal ? >>>>> >>>>> >>>>> On 24 August 2010 23:38, Michel TOKO <tokomic...@gmail.com> wrote: >>>>> >>>>>> Emmanuel, resultat du netstat, >>>>>> netstat -rn >>>>>> Kernel IP routing table >>>>>> Destination Gateway Genmask Flags MSS Window >>>>>> irtt Iface >>>>>> 192.168.111.111 0.0.0.0 255.255.255.255 UH 0 0 >>>>>> 0 ppp0 >>>>>> 165.21.42.84 0.0.0.0 255.255.255.255 UH 0 0 >>>>>> 0 ppp0 >>>>>> xxx.xxx.xxx.xxx 0.0.0.0 255.255.255.248 U 0 >>>>>> 0 0 eth0 >>>>>> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 >>>>>> 0 eth0 >>>>>> 0.0.0.0 xxx.xxx.xxx.xxx 0.0.0.0 UG 0 >>>>>> 0 0 eth0 >>>>>> >>>>>> un problème ici ? >>>>>> >>>>>> >>>>>> >>>>>> On 24 August 2010 23:33, Michel TOKO <tokomic...@gmail.com> wrote: >>>>>> >>>>>>> Yes i did. >>>>>>> >>>>>>> *port=8080;mmsc-url= >>>>>>> http://xxx.xxx.xxx.xxx:10021/mmsc;proxy=165.21.42.84:8080;msisdn=100 >>>>>>> "* >>>>>>> >>>>>>> >>>>>>> On 24 August 2010 23:24, Emmanuel CHANSON <emmanuelchan...@gmail.com >>>>>>> > wrote: >>>>>>> >>>>>>>> Michel, >>>>>>>> >>>>>>>> >>>>>>>> *in my config file the mmsc proxy is set as suggested. >>>>>>>> ** >>>>>>>> mmsc-url= >>>>>>>> http://xxx.xxxxxxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >>>>>>>> * >>>>>>>> Did you replace these values by your config used in your provider >>>>>>>> network ? >>>>>>>> ie: your mmsc ip address & your mmsc port ? and mms url ? >>>>>>>> >>>>>>>> You have to. >>>>>>>> >>>>>>>> Otherwise second solution below with routing. >>>>>>>> >>>>>>>> Emmanuel >>>>>>>> >>>>>>>> 2010/8/25 Michel TOKO <tokomic...@gmail.com> >>>>>>>> >>>>>>>> Thanks Emmanuel, >>>>>>>>> >>>>>>>>> in my config file the mmsc proxy is set as suggested. >>>>>>>>> * >>>>>>>>> mmsc-url= >>>>>>>>> http://xxx.xxxxxxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >>>>>>>>> >>>>>>>>> May be i've to check your second advice >>>>>>>>> >>>>>>>>> * >>>>>>>>> maybe you can not reach your mms-c cause of some routing not >>>>>>>>> configured, check your routing table after ppp0 is up and you can try >>>>>>>>> to >>>>>>>>> "telnet mms-c_ip mmsc_port" to see if you reach it. >>>>>>>>> >>>>>>>>> If not then you have to add a route to reach it, by hand first to >>>>>>>>> test, then inside /etc/ppp/ip-up. >>>>>>>>> >>>>>>>>> Will get back to you very soon. >>>>>>>>> >>>>>>>>> Thanks >>>>>>>>> >>>>>>>>> >>>>>>>>> On 24 August 2010 22:27, Emmanuel CHANSON < >>>>>>>>> emmanuelchan...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Hello Michel, >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *...... >>>>>>>>>> **2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >>>>>>>>>> <fetch_content> [mmsbox-mm1] [n/a] failed to fetch/post content: >>>>>>>>>> couldn't >>>>>>>>>> connect to host >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 >>>>>>>>>> <handle_mm1> [mmsbox-mm1] [n/a] Sending failed: (none), (none)! >>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 <handle_mm1> >>>>>>>>>> [mmsbox-mm1] [n/a] GPRS turned off returned: 0 >>>>>>>>>> ......* >>>>>>>>>> >>>>>>>>>> I think Mbuni can not reach your MMS-C (provider), so try to see >>>>>>>>>> if your MMS-C proxy address and port is correct inside mmsbox.conf: >>>>>>>>>> >>>>>>>>>> In my case: >>>>>>>>>> >>>>>>>>>> *custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat >>>>>>>>>> /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= >>>>>>>>>> http://xxx.xxxxxxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"* >>>>>>>>>> >>>>>>>>>> this part: >>>>>>>>>> >>>>>>>>>> *mmsc-url= >>>>>>>>>> http://xxx.xxxxxxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100"; >>>>>>>>>> >>>>>>>>>> * >>>>>>>>>> I think your problem may be here.* >>>>>>>>>> >>>>>>>>>> **Or * >>>>>>>>>> maybe you can not reach your mms-c cause of some routing not >>>>>>>>>> configured, check your routing table after ppp0 is up and you can >>>>>>>>>> try to >>>>>>>>>> "telnet mms-c_ip mmsc_port" to see if you reach it. >>>>>>>>>> >>>>>>>>>> If not then you have to add a route to reach it, by hand first to >>>>>>>>>> test, then inside /etc/ppp/ip-up. >>>>>>>>>> >>>>>>>>>> Regards, >>>>>>>>>> >>>>>>>>>> Emmanuel >>>>>>>>>> >>>>>>>>>> 2010/8/24 Michel TOKO <tokomic...@gmail.com> >>>>>>>>>> >>>>>>>>>>> HI Emmanuel, ppp connection is ok using your config but still >>>>>>>>>>> getting : >>>>>>>>>>> >>>>>>>>>>> ...... >>>>>>>>>>> *2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:628 >>>>>>>>>>> <fetch_content> [mmsbox-mm1] [n/a] failed to fetch/post content: >>>>>>>>>>> couldn't >>>>>>>>>>> connect to host >>>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string at 0xb600f748: >>>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: len: 0 >>>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: size: 0 >>>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: immutable: 0 >>>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] DEBUG: Octet string dump ends. >>>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] ERROR: mmsbox_mm1.c:499 >>>>>>>>>>> <handle_mm1> [mmsbox-mm1] [n/a] Sending failed: (none), (none)! >>>>>>>>>>> 2010-08-25 05:00:01 [5301] [5] INFO: mmsbox_mm1.c:524 >>>>>>>>>>> <handle_mm1> [mmsbox-mm1] [n/a] GPRS turned off returned: 0* >>>>>>>>>>> ...... >>>>>>>>>>> >>>>>>>>>>> Please did use solve this issue? >>>>>>>>>>> >>>>>>>>>>> tail -f /var/log/messages >>>>>>>>>>> * >>>>>>>>>>> ...... >>>>>>>>>>> Aug 25 04:56:49 localhost pppd[5547]: Serial connection >>>>>>>>>>> established. >>>>>>>>>>> Aug 25 04:56:49 localhost pppd[5547]: Using interface ppp0 >>>>>>>>>>> Aug 25 04:56:49 localhost pppd[5547]: Connect: ppp0 <--> >>>>>>>>>>> /dev/ttyUSB0 >>>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: Remote message: Welcome! >>>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: PAP authentication >>>>>>>>>>> succeeded >>>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: local IP address >>>>>>>>>>> 10.236.24.83 >>>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: remote IP address >>>>>>>>>>> 192.168.111.111 >>>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: primary DNS address >>>>>>>>>>> 165.21.83.88 >>>>>>>>>>> Aug 25 04:56:53 localhost pppd[5547]: secondary DNS address >>>>>>>>>>> 165.21.100.88 >>>>>>>>>>> Aug 25 05:00:01 localhost pppd[5547]: Terminating on signal 15 >>>>>>>>>>> Aug 25 05:00:01 localhost pppd[5547]: Connect time 3.2 minutes. >>>>>>>>>>> Aug 25 05:00:01 localhost pppd[5547]: Sent 300 bytes, received 0 >>>>>>>>>>> bytes. >>>>>>>>>>> .....* >>>>>>>>>>> >>>>>>>>>>> Thanks >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On 24 August 2010 20:54, Emmanuel CHANSON < >>>>>>>>>>> emmanuelchan...@gmail.com> wrote: >>>>>>>>>>> >>>>>>>>>>>> Thanks to Piotr who help me with pppd >>>>>>>>>>>> >>>>>>>>>>>> BR >>>>>>>>>>>> >>>>>>>>>>>> Emmanuel >>>>>>>>>>>> >>>>>>>>>>>> 2010/8/24 Michel TOKO <tokomic...@gmail.com> >>>>>>>>>>>> >>>>>>>>>>>> Thanks Emmanuel will get back to you. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Merci! >>>>>>>>>>>>> >>>>>>>>>>>>> On 24 August 2010 09:45, Emmanuel CHANSON < >>>>>>>>>>>>> emmanuelchan...@gmail.com> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Nokia 6230 config with Mbuni latest CVS: >>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/mbuni/mmsbox.conf: >>>>>>>>>>>>>> ------------------------------------- >>>>>>>>>>>>>> ... >>>>>>>>>>>>>> # Sample conf for MMSBox using a modem (MM1) >>>>>>>>>>>>>> group = mmsc >>>>>>>>>>>>>> #id = modem >>>>>>>>>>>>>> id = nokiaphone >>>>>>>>>>>>>> type = custom >>>>>>>>>>>>>> custom-settings = "gprs-on=pppd call mobile-auth;gprs-pid=cat >>>>>>>>>>>>>> /var/run/ppp0-mbuni.pid|head -1;port=3130;mmsc-url= >>>>>>>>>>>>>> http://xxx.xxxxxxx.xx/mmsc;proxy=192.168.39.201:3130;msisdn=100 >>>>>>>>>>>>>> " >>>>>>>>>>>>>> mmsc-library = /usr/local/mbuni/lib/libmmsbox_mm1.so >>>>>>>>>>>>>> ... >>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/ppp/peers/mobile-auth: >>>>>>>>>>>>>> ---------------------------------------- >>>>>>>>>>>>>> file /etc/ppp/peers/options-mobile >>>>>>>>>>>>>> user "<your_login>" >>>>>>>>>>>>>> password "<your_password>" >>>>>>>>>>>>>> connect "/usr/sbin/chat -v -t15 -f >>>>>>>>>>>>>> /etc/ppp/chatscripts/mobile-modem.chat" >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/ppp/peers/options-mobile: >>>>>>>>>>>>>> -------------------------------------------- >>>>>>>>>>>>>> ttyACM0 >>>>>>>>>>>>>> 115200 >>>>>>>>>>>>>> lock >>>>>>>>>>>>>> crtscts >>>>>>>>>>>>>> modem >>>>>>>>>>>>>> passive >>>>>>>>>>>>>> novj >>>>>>>>>>>>>> nodefaultroute >>>>>>>>>>>>>> nodetach >>>>>>>>>>>>>> noipdefault >>>>>>>>>>>>>> usepeerdns >>>>>>>>>>>>>> noauth >>>>>>>>>>>>>> hide-password >>>>>>>>>>>>>> persist >>>>>>>>>>>>>> holdoff 10 >>>>>>>>>>>>>> maxfail 0 >>>>>>>>>>>>>> debug >>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/ppp/chatscripts/mobile-modem.chat: >>>>>>>>>>>>>> ----------------------------------------------------------- >>>>>>>>>>>>>> ABORT 'BUSY' >>>>>>>>>>>>>> ABORT 'NO CARRIER' >>>>>>>>>>>>>> ABORT 'VOICE' >>>>>>>>>>>>>> ABORT 'NO DIALTONE' >>>>>>>>>>>>>> ABORT 'NO DIAL TONE' >>>>>>>>>>>>>> ABORT 'NO ANSWER' >>>>>>>>>>>>>> ABORT 'DELAYED' >>>>>>>>>>>>>> REPORT CONNECT >>>>>>>>>>>>>> TIMEOUT 6 >>>>>>>>>>>>>> '' 'ATQ0' >>>>>>>>>>>>>> 'OK-AT-OK' 'ATZ' >>>>>>>>>>>>>> TIMEOUT 3 >>>>>>>>>>>>>> 'OK' @/etc/ppp/chatscripts/pin.NONE >>>>>>>>>>>>>> 'OK-AT-OK' 'ATI' >>>>>>>>>>>>>> 'OK' 'ATZ' >>>>>>>>>>>>>> 'OK' @/etc/ppp/chatscripts/mode.NONE >>>>>>>>>>>>>> 'OK-AT-OK' @/etc/ppp/chatscripts/apn >>>>>>>>>>>>>> 'OK' 'ATDT*99***1#' >>>>>>>>>>>>>> TIMEOUT 30 >>>>>>>>>>>>>> CONNECT '' >>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/ppp/chatscripts/mode.NONE: >>>>>>>>>>>>>> ------------------------------------------------- >>>>>>>>>>>>>> AT >>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/ppp/chatscripts/pin.NONE: >>>>>>>>>>>>>> --------------------------------------------- >>>>>>>>>>>>>> AT >>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/ppp/chatscripts/apn: >>>>>>>>>>>>>> ------------------------------------ >>>>>>>>>>>>>> AT+CGDCONT=1,"IP","<your_mms_apn>" >>>>>>>>>>>>>> >>>>>>>>>>>>>> You need 2 additionnal scripts to be launched when modem got >>>>>>>>>>>>>> the connection: >>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/ppp/ip-up: >>>>>>>>>>>>>> -------------------- >>>>>>>>>>>>>> #!/bin/sh >>>>>>>>>>>>>> IFNAME="$1" >>>>>>>>>>>>>> LOCAL_IP="$4" >>>>>>>>>>>>>> REMOTE_IP="$5" >>>>>>>>>>>>>> IPPARAM="$6" >>>>>>>>>>>>>> MMS_PROXY="192.168.39.201" >>>>>>>>>>>>>> /sbin/ip route add to 192.168.39.201 dev ppp0 >>>>>>>>>>>>>> # routing has been set up, so: >>>>>>>>>>>>>> ln -sf /var/run/ppp0.pid /var/run/ppp0-mbuni.pid >>>>>>>>>>>>>> >>>>>>>>>>>>>> /etc/ppp/ip-down: >>>>>>>>>>>>>> ------------------------- >>>>>>>>>>>>>> # remove pid file >>>>>>>>>>>>>> rm -rf /var/run/ppp0-mbuni.pid >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Emmanuel >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2010/8/24 patrick meye <patrick_m...@yahoo.fr> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Emmanuel, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I need config files using Nokia 6230,can you send it to me >>>>>>>>>>>>>>> please?? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Regards. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Patrick >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ------------------------------ >>>>>>>>>>>>>>> *De :* Emmanuel CHANSON <emmanuelchan...@gmail.com> >>>>>>>>>>>>>>> *À :* users@mbuni.org >>>>>>>>>>>>>>> *Envoyé le :* Mar 24 août 2010, 0h 59min 12s >>>>>>>>>>>>>>> *Objet :* [Users] Mbuni & Huawei E220 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Does anyone has already configured a Huawei E220 with Mbuni >>>>>>>>>>>>>>> and pppd ? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I am looking for any config with E220. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Note: I use actually a Nokia 6230 that work well if anybody >>>>>>>>>>>>>>> needs config files. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> Emmanuel >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> Users mailing list >>>>>>>>>>>>>> Users@mbuni.org >>>>>>>>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>> Users mailing list >>>>>>>>>>>>> Users@mbuni.org >>>>>>>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Emmanuel >>>>>>>>>>>> >>>>>>>>>>>> CHANSON Emmanuel >>>>>>>>>>>> Mobile Nouvelle-Calédonie: +687.77.35.02 >>>>>>>>>>>> Mobile France: +33 (0) 6.68.03.89.56 >>>>>>>>>>>> @email : emmanuelchan...@gmail.com >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> Users mailing list >>>>>>>>>>>> Users@mbuni.org >>>>>>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> _______________________________________________ >>>>>>>>>>> Users mailing list >>>>>>>>>>> Users@mbuni.org >>>>>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> Users mailing list >>>>>>>>>> Users@mbuni.org >>>>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> Users mailing list >>>>>>>>> Users@mbuni.org >>>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Emmanuel >>>>>>>> >>>>>>>> CHANSON Emmanuel >>>>>>>> Mobile Nouvelle-Calédonie: +687.77.35.02 >>>>>>>> Mobile France: +33 (0) 6.68.03.89.56 >>>>>>>> @email : emmanuelchan...@gmail.com >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Users mailing list >>>>>>>> Users@mbuni.org >>>>>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>>>>> >>>>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> _______________________________________________ >>>>> Users mailing list >>>>> Users@mbuni.org >>>>> http://lists.mbuni.org/mailman/listinfo/users >>>>> >>>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users@mbuni.org >>>> http://lists.mbuni.org/mailman/listinfo/users >>>> >>>> >>> _______________________________________________ >>> Users mailing list >>> Users@mbuni.org >>> http://lists.mbuni.org/mailman/listinfo/users >>> >>> >> >> _______________________________________________ >> Users mailing list >> Users@mbuni.org >> http://lists.mbuni.org/mailman/listinfo/users >> >> > _______________________________________________ > Users mailing list > Users@mbuni.org > http://lists.mbuni.org/mailman/listinfo/users > > -- Emmanuel CHANSON Emmanuel Mobile Nouvelle-Calédonie: +687.77.35.02 Mobile France: +33 (0) 6.68.03.89.56 @email : emmanuelchan...@gmail.com
_______________________________________________ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users
