@emmanuel how do you go about composing the mms's you attached? also do you need to have a public ip address to send mms's via a gsm network as i have tried sending them but on them from mbuni but on the handset it says, "message retrieval failed" what could be the issue?
On Tue, Mar 29, 2011 at 9:37 AM, paul mwaniki <paulmw...@gmail.com> wrote: > sorry friend mbuni is hell on earth,infact i quit a job when i was > told to work on mbuni. but i will forward you some helpful documents > > On Tue, Mar 29, 2011 at 9:21 AM, ranjani kr <ranjani14...@gmail.com> > wrote: > > Hi All, > > > > I'm trying to set up MMS gateway. > > With the help of some blogs and Mbuni guide I'm able to set mmsc to an > > extent. I'm almost near setting mbuni as mmsc but still something is > > missing. This is project work of my course but need some guidelines to > > finish in time. Can you please take some time to help me with this or > guide > > me if I'm going wrong > > > > Here is my mmsc.config file > > > > group = core > > log-file = /tmp/log/mbuni-mmsc.log > > access-log = /tmp/log/mmsc-access.log > > log-level = 0 > > > > group = mbuni > > #name = "My MMSC" > > hostname = *.*.*.* > > host-alias = mmsc > > local-prefixes = +91;037;+25637;25637 > > storage-directory = /tmp/spool > > max-send-threads = 5 > > #send-mail-prog = /usr/sbin/sendmail -f '%f' '%t' > > #unified-prefix = "+25637,037,37" > > #maximum-send-attempts = 50 > > default-message-expiry = 360000 > > #queue-run-interval = 5 > > #send-attempt-back-off = 300 > > sendsms-url = http://*.*.*.*:3001/cgi-bin/sendsms? > > sendsms-username = ****** > > sendsms-password = ****** > > mms-port = 1981 > > mm7-port = 1982 > > optimize-notification-size = true > > > > group = mmsc > > id = local > > mmsc-url = http://mbuni:test@localhost:1982/soap > > incoming-username = user > > incoming-password = pass > > incoming-port = 12345 > > type = soap > > > > group = mms-vasp > > vasp-id = newscorp > > type = soap > > short-code = 111 > > vasp-username = mbuni > > vasp-password = test > > vasp-url = http://user:pass@localhost:12345/ > > > > group = mmsproxy > > name = "A test mms proxy" > > host = ds.co.ug > > allowed-prefix = "+25635" > > denied-prefix = "037" > > > > > > Values of hostname, sendsms-username and sendsms-password are the one > used > > in smskannel.conf. > > I dont know if group = mms-vasp and group = mmsproxy is required to send > > mms. Also I'm not sure > > if type = soap which is used in group = mmsc and in group = mms-vasp. > > > > I executed the following commands: > > mmsproxy /etc/mmsc.conf & > > > > [root@secondlinux ~]# 2011-03-28 15:24:19 [4989] [0] INFO: Debug_lvl = > -1, > > log_file = <none>, log_lvl = 0 > > 2011-03-28 15:24:19 [4989] [0] INFO: > > ---------------------------------------- > > 2011-03-28 15:24:19 [4989] [0] INFO: Mbuni MMSC Proxy version 1.4.0 > > starting > > 2011-03-28 15:24:19 [4989] [0] INFO: Added logfile > `/tmp/log/mbuni-mmsc.log' > > with level `0'. > > 2011-03-28 15:24:19 [4989] [0] INFO: Started access logfile > > `/tmp/log/mmsc-access.log'. > > 2011-03-28 15:24:19 [4989] [0] INFO: HTTP: Opening server at port 1981. > > 2011-03-28 15:24:19 [4989] [0] DEBUG: Started thread 1 > > (gwlib/fdset.c:poller) > > 2011-03-28 15:24:19 [4989] [0] DEBUG: Started thread 2 > > (gwlib/http.c:server_thread) > > 2011-03-28 15:24:19 [4989] [0] INFO: HTTP: Opening server at port 1982. > > 2011-03-28 15:24:19 [4989] [0] DEBUG: Started thread 3 > > (mmsproxy.c:(gwthread_func_t *)mm7proxy) > > 2011-03-28 15:24:19 [4989] [1] DEBUG: Thread 1 (gwlib/fdset.c:poller) > maps > > to pid 4989. > > 2011-03-28 15:24:19 [4989] [2] DEBUG: Thread 2 > (gwlib/http.c:server_thread) > > maps to pid 4989. > > 2011-03-28 15:24:19 [4989] [3] DEBUG: Thread 3 > (mmsproxy.c:(gwthread_func_t > > *)mm7proxy) maps to pid 4989. > > > > > > mmsrelay /etc/mmsc.conf & > > > > [root@secondlinux ~]# 2011-03-28 15:26:03 [5008] [0] INFO: Debug_lvl = > -1, > > log_file = <none>, log_lvl = 0 > > 2011-03-28 15:26:03 [5008] [0] INFO: > > ---------------------------------------- > > 2011-03-28 15:26:03 [5008] [0] INFO: Mbuni MMSC Relay version 1.4.0 > > starting > > 2011-03-28 15:26:03 [5008] [0] INFO: Added logfile > `/tmp/log/mbuni-mmsc.log' > > with level `0'. > > 2011-03-28 15:26:03 [5008] [0] INFO: Started access logfile > > `/tmp/log/mmsc-access.log'. > > 2011-03-28 15:26:03 [5008] [0] INFO: Starting Global Queue Runner... > > 2011-03-28 15:26:03 [5008] [0] DEBUG: Started thread 1 > > (mmsrelay.c:(gwthread_func_t *)mbuni_global_queue_runner) > > 2011-03-28 15:26:03 [5008] [0] INFO: Starting Local Queue Runner... > > 2011-03-28 15:26:03 [5008] [0] DEBUG: Started thread 2 > > (mmsmobilesender.c:(gwthread_func_t *)receive_push_reply) > > 2011-03-28 15:26:03 [5008] [0] DEBUG: Started thread 3 > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > 2011-03-28 15:26:03 [5008] [0] DEBUG: Started thread 4 > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > 2011-03-28 15:26:03 [5008] [0] DEBUG: Started thread 5 > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > 2011-03-28 15:26:03 [5008] [0] DEBUG: Started thread 6 > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > 2011-03-28 15:26:03 [5008] [0] DEBUG: Started thread 7 > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > 2011-03-28 15:26:03 [5008] [1] DEBUG: Thread 1 > (mmsrelay.c:(gwthread_func_t > > *)mbuni_global_queue_runner) maps to pid 5008. > > 2011-03-28 15:26:03 [5008] [1] DEBUG: Started thread 8 > > (mmsglobalsender.c:cdr_thread) > > 2011-03-28 15:26:03 [5008] [1] DEBUG: Started thread 9 > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > 2011-03-28 15:26:03 [5008] [1] DEBUG: Started thread 10 > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > 2011-03-28 15:26:03 [5008] [7] DEBUG: Thread 7 > (mms_queue.c:(gwthread_func_t > > *)tdeliver) maps to pid 5008. > > 2011-03-28 15:26:03 [5008] [5] DEBUG: Thread 5 > (mms_queue.c:(gwthread_func_t > > *)tdeliver) maps to pid 5008. > > 2011-03-28 15:26:03 [5008] [6] DEBUG: Thread 6 > (mms_queue.c:(gwthread_func_t > > *)tdeliver) maps to pid 5008. > > 2011-03-28 15:26:03 [5008] [10] DEBUG: Thread 10 > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 5008. > > 2011-03-28 15:26:03 [5008] [11] DEBUG: Thread 11 > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 5008. > > 2011-03-28 15:26:03 [5008] [1] DEBUG: Started thread 11 > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > 2011-03-28 15:26:03 [5008] [3] DEBUG: Thread 3 > (mms_queue.c:(gwthread_func_t > > *)tdeliver) maps to pid 5008. > > 2011-03-28 15:26:03 [5008] [4] DEBUG: Thread 4 > (mms_queue.c:(gwthread_func_t > > *)tdeliver) maps to pid 5008. > > 2011-03-28 15:26:03 [5008] [2] DEBUG: Thread 2 > > (mmsmobilesender.c:(gwthread_func_t *)receive_push_reply) maps to pid > 5008. > > 2011-03-28 15:26:03 [5008] [8] DEBUG: Thread 8 > > (mmsglobalsender.c:cdr_thread) maps to pid 5008. > > 2011-03-28 15:26:03 [5008] [1] DEBUG: Started thread 12 > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > 2011-03-28 15:26:03 [5008] [1] DEBUG: Started thread 13 > > (mms_queue.c:(gwthread_func_t *)tdeliver) > > 2011-03-28 15:26:03 [5008] [9] DEBUG: Thread 9 > (mms_queue.c:(gwthread_func_t > > *)tdeliver) maps to pid 5008. > > 2011-03-28 15:26:03 [5008] [12] DEBUG: Thread 12 > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 5008. > > 2011-03-28 15:26:03 [5008] [13] DEBUG: Thread 13 > > (mms_queue.c:(gwthread_func_t *)tdeliver) maps to pid 5008. > > > > mmssend -f +919********* -t +919********* -m test.txt -b /etc/mmsc.conf > > > > 2011-03-28 15:29:11 [5042] [0] INFO: Debug_lvl = -1, log_file = <none>, > > log_lvl = 0 > > 2011-03-28 15:29:11 [5042] [0] INFO: > > ---------------------------------------- > > 2011-03-28 15:29:11 [5042] [0] INFO: MMSC Message sender runner version > > 1.4.0 starting > > 2011-03-28 15:29:11 [5042] [0] INFO: Added logfile > `/tmp/log/mbuni-mmsc.log' > > with level `0'. > > 2011-03-28 15:29:11 [5042] [0] INFO: Started access logfile > > `/tmp/log/mmsc-access.log'. > > 2011-03-28 15:29:11 [5042] [0] DEBUG: Failed to read MIME headers in > Octstr > > block: > > 2011-03-28 15:29:11 [5042] [0] DEBUG: Octet string at 0x9b4e718: > > 2011-03-28 15:29:11 [5042] [0] DEBUG: len: 8 > > 2011-03-28 15:29:11 [5042] [0] DEBUG: size: 1024 > > 2011-03-28 15:29:11 [5042] [0] DEBUG: immutable: 0 > > 2011-03-28 15:29:11 [5042] [0] DEBUG: data: 74 65 73 74 69 6e 67 > > 0a testing. > > 2011-03-28 15:29:11 [5042] [0] DEBUG: Octet string dump ends. > > 2011-03-28 15:29:11 [5042] [0] PANIC: No Message supplied, or failed to > > decode binary data! > > 2011-03-28 15:29:11 [5042] [0] PANIC: mmssend(gw_panic+0xc2) [0x8084112] > > 2011-03-28 15:29:11 [5042] [0] PANIC: mmssend(main+0x658) [0x80536a8] > > 2011-03-28 15:29:11 [5042] [0] PANIC: > > /lib/i686/nosegneg/libc.so.6(__libc_start_main+0xe0) [0x4b279f70] > > 2011-03-28 15:29:11 [5042] [0] PANIC: mmssend [0x8052f91] > > > > These are the logs which are appearing on the screen. I'm totally lost > and > > dont know how to proceed. Please help me with this > > > > Thank you > > Ranjani > > > > > > > > > > > > _______________________________________________ > > Users mailing list > > Users@mbuni.org > > http://lists.mbuni.org/mailman/listinfo/users > > > > > _______________________________________________ > Users mailing list > Users@mbuni.org > http://lists.mbuni.org/mailman/listinfo/users >
_______________________________________________ Users mailing list Users@mbuni.org http://lists.mbuni.org/mailman/listinfo/users
