Dear Gessler I modify the partitions of my hard disks and make sure there is only one ext2 partition in both two hosts.(Actually, in the file "/etc/fstab" there is an option to mount a ext2 partition to a ext3.) I also change the configuration of "interfaces=" from 'interfaces=defaultroute' to 'interfaces="ipsec0=eth0"'. These are what you told me. In addition, I remove a NIC of "hp200", now two hosts have the same hardware configuration.
I reinstall the RedHat Linux7.3 and FreeS/WAN with your IPV6 Patch in each host. After I confgure the paramters of network, compile the kernel and modify the "/etc/ipsec.conf", I start the connection of "hp100-hp200" again, I get the same failure. Fortunately, the root file system is still ok this time. By the way, I find an surprising phenomena, even the hp200 host can't respond any key, I can still ping it. If I ping "2001:250:f006:1::451",both on the screen of two hosts display "IPsec6: Packet does not match inbound ESP policies" "IPsec6: dropping packet" If I ping another address of hp200(2001:250:f006:3::1), it is normal. I can switch the login screen of hp200 and even key my login name, but it never gives me an Password prompt. Also I can't telnet to hp200. I don't know what's wrong and how to correct the error! Please help me. Thanks in advance. PS: The attachment includes the network parameters, route tables, kernel options and some helpful information of hp100 and hp200. Because two hosts have the same hardware configuration, so I just give you only one copy of kernel options. Lorry
info.tar.gz
Description: Binary data
_______________________________________________ FreeS/WAN Users mailing list [EMAIL PROTECTED] https://mj2.freeswan.org/cgi-bin/mj_wwwusr
