OK. I've got error again and I've got : dd: /dev/ssd: Input/output error dmesg:
<7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <3>hub 1-0:1.0: Cannot enable port 3. Maybe the USB cable is bad? <7>hub 1-0:1.0: logical disconnect on port 3 <7>usb-storage: storage_post_reset <7>usb-storage: usb_reset_composite_device returns -19 <7>usb-storage: usb_stor_Bulk_reset called <7>usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 <7>usb-storage: Soft reset failed: -19 <7>usb-storage: scsi cmd done, result=0x70000 <7>usb-storage: *** thread sleeping. <7>hub 1-0:1.0: state 7 ports 3 chg 0008 evt 0008 <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: reset change on port 3 <7>hub 1-0:1.0: port 3, status 0101, change 0012, 12 Mb/s <6>usb 1-3: USB disconnect, address 3 <7>usb 1-3: unregistering device <7>usb 1-3: usb_disable_device nuking all URBs <7>usb 1-3: unregistering interface 1-3:1.0 <7> usbdev1.3_ep81: ep_device_release called for usbdev1.3_ep81 <7> usbdev1.3_ep02: ep_device_release called for usbdev1.3_ep02 <7>usb-storage: storage_disconnect() called <7>usb-storage: usb_stor_stop_transport called <7>usb-storage: queuecommand called <7>usb-storage: Fail command during disconnect <6>sd 0:0:0:0: SCSI error: return code = 0x00010000 <4>end_request: I/O error, dev sda, sector 31518 <3>Buffer I/O error on device sda1, logical block 3932 <3>Buffer I/O error on device sda1, logical block 3933 <3>Buffer I/O error on device sda1, logical block 3934 <3>Buffer I/O error on device sda1, logical block 3935 <3>Buffer I/O error on device sda1, logical block 3936 <3>Buffer I/O error on device sda1, logical block 3937 <3>Buffer I/O error on device sda1, logical block 3938 <3>Buffer I/O error on device sda1, logical block 3939 <3>Buffer I/O error on device sda1, logical block 3940 <3>Buffer I/O error on device sda1, logical block 3941 <7>usb-storage: queuecommand called <7>usb-storage: Fail command during disconnect <6>sd 0:0:0:0: SCSI error: return code = 0x00010000 <4>end_request: I/O error, dev sda, sector 31758 <7>usb-storage: -- usb_stor_release_resources <7>usb-storage: -- sending exit command to thread <7>usb-storage: -- dissociate_dev <7>usb 1-3:1.0: uevent <7> usbdev1.3_ep00: ep_device_release called for usbdev1.3_ep00 <7>usb 1-3: uevent <7>usb-storage: *** thread awakened. <7>usb-storage: -- exiting <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 200ms <3>scsi 0:0:0:0: rejecting I/O to dead device <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <3>scsi 0:0:0:0: rejecting I/O to dead device <3>NILFS: unable to write superblock (err=-5) <3>scsi 0:0:0:0: rejecting I/O to dead device <3>NILFS: unable to write superblock (err=-5) <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <3>hub 1-0:1.0: Cannot enable port 3. Maybe the USB cable is bad? <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 200ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <3>hub 1-0:1.0: Cannot enable port 3. Maybe the USB cable is bad? <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 200ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <3>hub 1-0:1.0: Cannot enable port 3. Maybe the USB cable is bad? <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 200ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 not reset yet, waiting 500ms <7>hub 1-0:1.0: port_wait_reset: err = -16 <7>hub 1-0:1.0: port 3 not enabled, trying reset again... <3>hub 1-0:1.0: Cannot enable port 3. Maybe the USB cable is bad? <7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0008 <7>ep93xx-usb ep93xx-usb: GetStatus roothub.portstatus [2] = 0x00120101 PRSC PESC PPS CCS <7>hub 1-0:1.0: port 3 enable change, status 00000101 <7>hub 1-0:1.0: reset change on port 3 Dnia 2009-12-03, czw o godzinie 18:56 +0900, Ryusuke Konishi pisze: > Hi, > On Thu, 03 Dec 2009 09:48:55 +0100, Lukasz Wojcicki > <[email protected]> wrote: > > Too late. > > I reformat SSD disk to FAT32 and format to NILFS2 again. Now it work > > correctly. > > No, no. I suspect some kind of media error happened. My intention is > just reading the block device for narrowing down the cause. So, it's > independent with which filesystem is written on the device. > > > When I've got another error yesterday too. I've got ETIME error (from > > linux kernel) while transferring large file (log) from SSD disk. This > > situation was place, when nilfs_cleanerd was running and I execute > > lscp . Then (after long time) nilfs_cleanerd was stopped . > > Seems that the ETIME error comes from the device layer because nilfs > doesn't return it. I suspect cleanerd actually caused the issue. But > it seems to me that cleanerd degraded or overloaded your device. > > So, I thought we first should test the device itself. > > Regards, > Ryusuke Konishi Łukasz Wójcicki _______________________________________________ users mailing list [email protected] https://www.nilfs.org/mailman/listinfo/users
