Hi Albert, thank for the reply, funny thing is that it has worked well for 2 weeks and now stopped, I'm using a Fritzbox so I can't change too much, will re-check the config this night at home.
Best regards Stefano Pisati Il giorno 1-mar-2016, alle ore 09:50, Albert López <[email protected]<mailto:[email protected]>> ha scritto: Hello, The problem is that you have configured your client as an xTR when it should be a mobile node. You should change the parameter operating-mode of the configuration file from xTR to MN. The xTR is used when the device is working as a router with other clients connected to it. On the other hand, I see that the RLOC of the device is a private address while the address of the Map Server is a public address. Notice that current implementation of OOR doesn't support NAT. Best regards Albert On 28/02/16 03:03, vtec support wrote: hi i am trying to configure OOR on ubuntu 14.04 LTS server side oor.conf debug = 3 map-request-retries = 2 log-file = /var/log/oor.log operating-mode = MS control-iface = eth0 lisp-site { eid-prefix = 1.1.1.1/32 key-type = 1 key = test123 # iid = 0 accept-more-specifics = true } ========================================================================================== 2016/2/28 2:56:16] INFO: Open Overlay Router v1.0 compiled for Linux [2016/2/28 2:56:16] WARNING: Rights: Effective [4294967295] Permitted [4294967295] [2016/2/28 2:56:16] INFO: Building address to interface hash table [2016/2/28 2:56:16] INFO: Control created! [2016/2/28 2:56:16] INFO: Log level: High Debug [2016/2/28 2:56:16] DEBUG-3: Creating mdb... [2016/2/28 2:56:16] DEBUG-3: Creating mdb... [2016/2/28 2:56:16] DEBUG: Finished Constructing Map-Server [2016/2/28 2:56:16] INFO: Device working in mode Map Server registering with control [2016/2/28 2:56:16] DEBUG-2: Adding interface eth0 with index 2 to iface list [2016/2/28 2:56:16] DEBUG-2: Interface eth0 with index 2 added to interfaces lists [2016/2/28 2:56:16] DEBUG-3: open_ip_raw_socket: open socket 5 with afi: 2 [2016/2/28 2:56:16] DEBUG: bind_socket: Binded socket 5 to source address 16.9.8.13 and port 0 [2016/2/28 2:56:16] DEBUG: add_rule: Add rule -> Send packets with source address 16.9.8.13 and destination address _NULL_ to the table 2 with priority 2. [2016/2/28 2:56:16] DEBUG-3: open_ip_raw_socket: open socket 6 with afi: 10 [2016/2/28 2:56:16] DEBUG: bind_socket: Binded socket 6 to source address 2a01:4f8:151:208a::2 and port 0 [2016/2/28 2:56:16] DEBUG: add_rule: Add rule -> Send packets with source address 2a01:4f8:151:208a::2 and destination address _NULL_ to the table 2 with priority 2. [2016/2/28 2:56:16] DEBUG: Adding lisp site prefix 1.1.1.1/32 to the lisp-sites database [2016/2/28 2:56:16] DEBUG-3: _add_ippref_entry: Added map cache data for 1.1.1.1/32 [2016/2/28 2:56:16] DEBUG-3: mdb_add_entry: inserted 1.1.1.1/32 [2016/2/28 2:56:16] DEBUG-3: open_udp_datagram_socket: Created socket 7 associated to IPv4 addresses [2016/2/28 2:56:16] DEBUG: bind_socket: Binded socket 7 to source address _NULL_ and port 4342 [2016/2/28 2:56:16] DEBUG-3: open_udp_datagram_socket: Created socket 8 associated to IPv6 addresses [2016/2/28 2:56:16] DEBUG: bind_socket: Binded socket 8 to source address _NULL_ and port 4342 [2016/2/28 2:56:16] DEBUG-2: Default IPv4 control iface eth0: 16.9.8.13 [2016/2/28 2:56:16] DEBUG-2: Default IPv6 control iface eth0: 2a01:4f8:151:208a::2 [2016/2/28 2:56:16] DEBUG: Control initialized [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG: tun_update_route: Process new gateway associated to the interface eth0: 16.9.8.12 [2016/2/28 2:56:16] DEBUG: add_route: added route to the system: src addr: -, dst prefix:-, gw: 16.9.8.12, table: 2 [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: tun_update_route: the extractet address from the netlink messages is a local link address: fe80::1 discarded [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG-3: =>process_netlink_msg: Received new route message [2016/2/28 2:56:16] DEBUG: ****** Summary of the configuration ****** [2016/2/28 2:56:16] DEBUG: ****************** MS configured prefixes ************** [2016/2/28 2:56:16] DEBUG: Prefix: 1.1.1.1/32, accept specifics: on merge: off, proxy: off [2016/2/28 2:56:16] DEBUG: ******************************************************* [2016/2/28 2:56:16] DEBUG: **************** MS registered sites ****************** [2016/2/28 2:56:16] DEBUG: ******************************************************* [2016/2/28 2:56:16] DEBUG: Starting Map-Server ... [2016/2/28 2:56:16] INFO: Open Overlay Router (v1.0): started... [2016/2/28 2:56:16] DEBUG-3: OOR_API: zmq_ctx_new errno: Success [2016/2/28 2:56:16] DEBUG-3: OOR_API: zmq_socket: Success [2016/2/28 2:56:16] DEBUG-2: OOR_API: API server initiated using ZMQ ==================================================================================================== no LISP TUN show up on server side ifconfig eth0 Link encap:Ethernet HWaddr 14:da:e9:ef:6d:02 inet addr:16.9.8.13 Bcast:16.9.8.159 Mask:255.255.255.224 inet6 addr: 2a01:4f8:151:208a::2/64 Scope:Global inet6 addr: fe80::16da:e9ff:feef:6d02/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5893552 errors:0 dropped:20 overruns:0 frame:0 TX packets:2133706 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7390943067 (7.3 GB) TX bytes:530010168 (530.0 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:3584 errors:0 dropped:0 overruns:0 frame:0 TX packets:3584 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:215040 (215.0 KB) TX bytes:215040 (215.0 KB) Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 16.9.8.12 0.0.0.0 UG 0 0 0 eth0 16.9.8.13 16.9.8.12 255.255.255.224 UG 0 0 0 eth0 16.9.8.13 0.0.0.0 255.255.255.224 U 0 0 0 ethic client Ubuntu 14.04 LTS debug = 3 map-request-retries = 2 log-file = /var/log/oor.log operating-mode = xTR rloc-probing { rloc-probe-interval = 30 rloc-probe-retries = 2 rloc-probe-retries-interval = 5 map-resolver = { 16.9.8.13 } map-server { address = 16.9.8.13 key-type = 1 key = test123 proxy-reply = on database-mapping { eid-prefix = 1.1.1.1/32 # iid = 0 # rloc-address { # address = 192.168.8.105 # priority = 1 # weight = 50 # } rloc-iface{ interface = eth0 ip_version = 4 priority = 1 weight = 100 [2016/2/28 6:49:13] DEBUG: Map-Register -> flags:PirM record-count: 1 nonce 3bbadfa577d2fa3b, EID: 1.1.1.1/32, MS: 16.9.8.13 [2016/2/28 6:49:13] DEBUG: Sent control message IP: 192.168.8.105 -> 16.9.8.13 UDP: 4342 -> 4342 [2016/2/28 6:49:13] DEBUG: Sent Map-Register for mapping 1.1.1.1/32 to 16.9.8.13 [2016/2/28 6:49:13] DEBUG: Received Map-Notify-> flags:ir, record-count: 1, nonce 3BBADFA577D2FA3B, IP: 16.9.8.13 -> 192.168.8.105, UDP: 4342 -> 4342 [2016/2/28 6:49:13] DEBUG: Mapping-record -> ttl: 10 loc-count: 1 action: no-action auth: 1 map-version: 0 eid: 1.1.1.1/32 [2016/2/28 6:49:13] DEBUG: Locator-record -> flags: L=1,p=0,R=1, p/w: 1/100 255/0, addr: 192.168.8.105 [2016/2/28 6:49:13] DEBUG-2: mapping_get_locators_with_afi: List for OOR AFI 1 and afi 2 not yet created [2016/2/28 6:49:13] DEBUG-2: mapping_add_locator: Added locator 192.168.8.105 to the mapping with EID 1.1.1.1/32. [2016/2/28 6:49:13] DEBUG: Map-Notify message confirms correct registration of 1.1.1.1/32.Programing next Map-Register in 60 seconds [2016/2/28 6:49:13] DEBUG-3: xTR: Completed processing of LISP control message [2016/2/28 6:49:17] DEBUG-3: LMAPI: Data available in API socket [2016/2/28 6:49:17] DEBUG-3: LMAPI: Bytes read from API socket: -1. [2016/2/28 6:49:17] ERR: LMAPI: Error while ZMQ receiving: Resource temporarily unavailable [2016/2/28 6:49:17] ERR: oor_api_loop: Error while trying to retrieve API packet [2016/2/28 6:49:27] DEBUG-3: LMAPI: Data available in API socket [2016/2/28 6:49:27] DEBUG-3: LMAPI: Bytes read from API socket: -1. [2016/2/28 6:49:27] ERR: LMAPI: Error while ZMQ receiving: Resource temporarily unavailable [2016/2/28 6:49:27] ERR: oor_api_loop: Error while trying to retrieve API packet eth0 Link encap:Ethernet HWaddr 08:00:27:d2:e3:84 inet addr:192.168.8.105 Bcast:192.168.8.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fed2:e384/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21720 errors:0 dropped:0 overruns:0 frame:0 TX packets:14449 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:16039019 (16.0 MB) TX bytes:2328812 (2.3 MB) lispTun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 UP POINTOPOINT RUNNING MTU:1440 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:397 errors:0 dropped:0 overruns:0 frame:0 TX packets:397 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:37532 (37.5 KB) TX bytes:37532 (37.5 KB) Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.8.1 0.0.0.0 UG 0 0 0 eth0 192.168.8.0 0.0.0.0 255.255.255.0 U 1 0 0 ethic NO IP address of LISPTUN0 i don't know what i am doing wrong please help Thanks _______________________________________________ Users mailing list [email protected]<mailto:[email protected]> http://mail.openoverlayrouter.org/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list [email protected] http://mail.openoverlayrouter.org/cgi-bin/mailman/listinfo/users
