Hi Bogdan!
Thanks dor the DEBUG info. I found the problem. The *vp received from
radiusclient was NULL.
There were also other RADIUS attributes in the RADIUS response, which
were not in the dictionary of the radiusclient. Thus, the radiusclient
discarded all RADIUS attributes :-(
IMO, the radiusclient should be more tolerant.
regards,
klaus
PS: http://openser.org/dokuwiki/doku.php?id=radius
Bogdan-Andrei Iancu wrote:
Hi Klaus,
I just added (on cvs) more debug messages in auth_radius when extracting
AVPs. As I have no access to an auth RADIUS server, please give it a try
and send my the debug output.
regards,
bogdan
Klaus Darilion wrote:
Hi!
I'm using openser CVS and try to deliver the rpid using auth_radius.
But the rpid never appears in the AVPs. Also other AVP-SIP attributes
(e.g. SIP-AVP = #101:TEST) do not appear in the AVP.
Filling AVPs in the .cfg using avp_write("$ruri/username","$ruser");
works fine and are printed with avp_print.
Any ideas how I can track down this problem?
thanks
klaus
The radius server responds with a SIP-AVP (225) attribute (verfied
with tcpdump):
rpid:<sip:[EMAIL PROTECTED]>
my cfg snippet (full config attached):
if (!radius_proxy_authorize("")) {
xlog("L_WARN","wrong or no credentials - challenging client ...");
proxy_challenge("", "0");
exit;
};
xlog("L_WARN","start avp_print()-");
avp_print();
xlog("L_WARN","stop avp_print()--");
the debug log:
8(5807) checking REGISTER authentication ... 8(5807) check_nonce():
comparing [42e78dca8153d605c63042be302f64af00e1abfc] and
[42e78dca8153d605c63042be302f64af00e1abfc]
8(5807) DEBUG:auth_radius:radius_authorize_sterman: Success
8(5807) xl_printf: final buffer length 37
8(5807) start avp_print() - 8(5807) xl_printf: final buffer length 37
8(5807) stop avp_print() -- 8(5807) xl_printf: final buffer length 58
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
