Hi, Beware that if you're running openser without fork (usually for debugging), it will only bind your first defined ip address. In this case, udp: XXX.XXX.XXX.XXX [XXX.XXX.XXX.XXX]:5060. So, you might want to netstat port 5061 to confirm it is binded to openser.
Regards Marco "Joao Pereira" <[EMAIL PROTECTED]> escreveu na mensagem news:[EMAIL PROTECTED] > No, the phone is in a differente machine. > I believe the problem is in the ports OpenSER is using. That are: > > Listening on > udp: XXX.XXX.XXX.XXX [XXX.XXX.XXX.XXX]:5060 > tcp: XXX.XXX.XXX.XXX [XXX.XXX.XXX.XXX]:5060 > tls: XXX.XXX.XXX.XXX [XXX.XXX.XXX.XXX]:5061 > > Is this the correct configuration when using TLS? > The SIP clients should use 5060 to register. And the OpenSER should use > 5061 to route calls between SIP servers? > Thanks > Joao > > > > > Cesc wrote: > >>One option ... >>do you run the phone and server on the same machine? they may be >>listening on the same port or something like that ... that is, the >>phone sends to the server and the server replies to the contact >>address ... which is in fact the server address (the phone didn't tell >>you about the port conflict ... too bad :D ). So, you get a loop. >> >>Cesc >> >>On 3/27/06, Joao Pereira <[EMAIL PROTECTED]> >>wrote: >> >>>Hello to all >>>Im using openser with TLS (1.0.1-tls) but when I try to register a >>>client (X-Lite), the answer is always: >>>"Too Many Hops" >>>because of this: >>> >>> if (!mf_process_maxfwd_header("10")) { >>> sl_send_reply("483","Too Many Hops"); >>> exit; >>> }; >>> >>> >>> >>>Whats the problem? >>>Without TLS, this error doesnt happen. >>>Thanks >>>Joao Pereira >>> >>>_______________________________________________ >>>Users mailing list >>>[email protected] >>>http://openser.org/cgi-bin/mailman/listinfo/users >>> >>> > > _______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
