|
# # $Id: openser.cfg,v 1.5 2005/10/28
19:45:33 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration
parameters ------------------------ debug=3 # debug level (cmd
line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter
debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # # uncomment the following lines for TLS
support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify = 1 #tls_require_certificate = 0 #tls_method = TLSv1 #tls_certificate =
"/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key =
"/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list =
"/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading
---------------------------------- # Uncomment this if you want to use SQL
database #loadmodule
"/usr/local/lib/openser/modules/mysql.so" loadmodule
"/usr/local/lib/openser/modules/sl.so" loadmodule
"/usr/local/lib/openser/modules/tm.so" loadmodule
"/usr/local/lib/openser/modules/rr.so" loadmodule
"/usr/local/lib/openser/modules/maxfwd.so" loadmodule
"/usr/local/lib/openser/modules/usrloc.so" loadmodule
"/usr/local/lib/openser/modules/registrar.so" loadmodule
"/usr/local/lib/openser/modules/textops.so" # Uncomment this if you want digest
authentication # mysql.so must be loaded ! #loadmodule
"/usr/local/lib/openser/modules/auth.so" #loadmodule
"/usr/local/lib/openser/modules/auth_db.so" # ----------------- setting
module-specific parameters --------------- # -- usrloc params -- modparam("usrloc",
"db_mode", 0) # Uncomment this if you want to use SQL
database # for persistent storage and comment the
previous line #modparam("usrloc",
"db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db",
"calculate_ha1", yes) # # If you set "calculate_ha1"
parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db",
"password_column", "password") # -- rr params -- # add value to ;lr param to make some
broken UAs happy modparam("rr", "enable_full_lr",
1) # ------------------------- request
routing logic ------------------- # main routing logic route{ # initial sanity checks --
messages with # max_forwards==0, or excessively
long requests if (!mf_process_maxfwd_header("10"))
{
sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages --
to make sure that # subsequent messages will go
through our proxy; that's # particularly good if upstream
and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a
dialog should take the # path determined by
record-routing if (loose_route()) { # mark routing logic in
request append_hf("P-hint:
rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in
request append_hf("P-hint:
outbound\r\n"); # if you have some
interdomain connections via TLS
#if(uri=~"@tls_domain1.net") { #
t_relay_to_tls("IP_domain1","port_domain1"); # exit; #} else
if(uri=~"@tls_domain2.net") { #
t_relay_to_tls("IP_domain2","port_domain2"); # exit; #} route(1); }; # if the request is for other
domain use UsrLoc # (in case, it does not work, use
the following command # with proper names and addresses
in it) if (uri==myself) { if
(method=="REGISTER") { # Uncomment this
if you want to use digest authentication #if (!www_authorize("openser.org",
"subscriber")) { #
www_challenge("openser.org", "0"); # exit; #};
save("location"); exit; };
lookup("aliases"); if (!uri==myself) {
append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations
are handled using our USRLOC DB if
(!lookup("location")) {
sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint:
usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful
forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } From: ram
[mailto:[EMAIL PROTECTED] post ram On 6/9/06, Kelvin
Williams <[EMAIL PROTECTED]>
wrote: This
is a new OpenSER installation on a Solaris 10 box. Any
time we call openserctl we receive the following error: /usr/local/sbin/openserctl: syntax error at line
1026: `GW_IP=$' unexpected Line
26 of openserctl reads: GW_IP=$(($1+$2*256+$3*65536+$4*16777216)) Any
advice would be greatly appreciated! Thanks, kw
|
_______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
