El mié, nov 29 de 2006 a las 04:52 -0800, pardeep rathore comentaba:
> I have installed openser V 1.0.0 -Now i have the task
> for load testing of openser by using SIPp with
> authentication .I am using MYSQL as a database. I have
> add some users in the subscriber table .BUT i want to
> know which module i have to implement so that my
> openser can responds for INVITES and REGISTER both .
> I want like like this:SIPpUAC send first REGISTER
> message to openser , openser replies on the bases if
> users have entry in the subscriber table.Then INVITE .
I wrote some scripts to load test an * box doing transcoding..
maybe you can use them to generate some calls. You can found them in:
http://toofic.no-ip.org/pub/src/sip_loadtest.tgz
The usage is as follows:
First, you have to register some UACs like this:
./registrar.sh CODEC1 OPENSER_IP LOCAL_IP LOCAL_PORT
./registrar.sh CODEC2 OPENSER_IP LOCAL_IP LOCAL_PORT
where CODEC can be: alaw, ulaw, gsm, g729.
Second, you have to set one UAC to wait for a call:
./esperar.sh CODEC2 OPENSER_IP LOCAL_IP LOCAL_PORT
Third, you set the other UAC to generate the call:
./llamar.sh CODEC1 CODEC2 OPENSER_IP LOCAL_IP LOCAL_PORT
which means: UAC using CODEC1 will call to the UAC using CODEC2.
You have to add these users to the subscriber table:
testalaw
testulaw
testgsm
testg729
and if everything goes right.. you will have a lot of calls and a lot of
rtp traffic which you can tune on the fly as all those scripts are using
SIPp.
> If any one on the list have already done like this
> work Kindly share .cfg file or any documentation link
The only thing missing here is a functional openser.cfg which I dont have. I
hope this could be useful.
--
Greetings...
Víctor Toofic
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
