Hi Ben,
-d Debugging mode (multiple -d increase the level)
-E Log to stderr
you can get the same from cfg with
debug = 9
log_stderror = yes
so your openser will not use syslog, but standard error for logging.
now, regarding syslog logging - have you tried not to use the log
facility stuff? do not set it in either in cfg, neither in syslog.cfg
....openser should normally log to the default log file.
regards,
bogdan
Ben Ferguson - backcountry.com wrote:
Hmmmm. Interestingly, if i:
#openser -E -dddddddddddddd
I get all sorts of good logging sent to my console:
3(990) version: <SIP/2.0>
3(990) parse_headers: flags=2
3(990) Found param type 232, <branch> = <z9hG4bK40b3.2f0d0803.0>; state=16
3(990) end of header reached, state=5
3(990) parse_headers: Via found, flags=2
3(990) parse_headers: this is the first via
3(990) After parse_msg...
3(990) preparing to run routing scripts...
3(990) parse_headers: flags=8
3(990) DEBUG: add_param: tag=329cfeaa6ded039da25ff8cbb8668bd2.d88a
3(990) DEBUG:parse_to:end of header reached, state=29
3(990) DBUG:parse_to: display={}, ruri={sip:[EMAIL PROTECTED]
3(990) DEBUG: get_hdr_field: <To> [67]; uri=[sip:[EMAIL PROTECTED]
3(990) DEBUG: to body [<sip:[EMAIL PROTECTED]>]
3(990) parse_headers: flags=100
3(990) get_hdr_field: cseq <CSeq>: <43365> <ACK>
3(990) DEBUG: get_hdr_body : content_length=0
3(990) found end of header
3(990) DEBUG: is_maxfwd_present: max_forwards header not found!
3(990) DEBUG: add_param: tag=1142574036
3(990) DEBUG:parse_to:end of header reached, state=29
Now just to figure out how to pass the -E and -dddddddd options to openserctl
and redirect it to a text file... I may be on to something here that'll work
for my setup
-Ben-
----- Original Message -----
From: "Ben Ferguson - backcountry.com" <[EMAIL PROTECTED]>
To: [email protected]
Sent: Wednesday, February 21, 2007 5:08:14 PM (GMT-0700) US/Mountain
Subject: [Users] No logging. OpenSER on OpenBSD
I can't get any logging out of openSER for some reason. I've tried using the
log_facility setup via /etc/syslog.conf and i still cannot get any output.
What am I missing?
Here's the top of my openser.cfg file:
debug=9 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=yes # (cmd line: -E)
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
sip_warning=yes
#log_facility=LOG_LOCAL7
I've tried un-commenting that last line to correspond to my /etc/syslog.conf:
# don't log messages with LOG_LOCAL7 in /var/log/syslog anymore
*.*;auth,authpriv.none,local0.none -/var/log/syslog
#
# log messages with LOG_LOCAL7 in /var/log/ser.log
local7.* -/var/log/ser.log
What am i doing wrong? Any ideas?
Thanks,
Ben
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
