Hi
My ser.cfg:
modparam("nathelper", "rtpproxy_disable", 1)
modparam("nathelper", "natping_interval", 0)
modparam("mediaproxy", "natping_interval", 20)
and on my ser box Im running proxydispatcher.py: python
/usr/local/mediaproxy/proxydispatcher.py
mediaproxy.ini (on ser box)
[Dispatcher]
;
defaultProxy = Media Proxy server IP
[MediaProxy]
start = no
accounting = off
mediaproxy.ini (on my mediaproxy server)
[Dispatcher]
;
start = no
[MediaProxy]
;
listen = media server ip
allow = ser server ip
proxyIP = media server ip
accounting = off
and its running : python /usr/local/mediaproxy/mediaproxy.py
thanks
arun
On 5/18/07, Sergio Gutierrez <[EMAIL PROTECTED]> wrote:
Hi Arun.
Could you send a snippet of the log of both services.
Regards.
Sergio G.
On 5/18/07, Arun Kumar < [EMAIL PROTECTED]> wrote:
>
> Hi,
>
> can you please post your mediaproxy config for two server config. Im
> trying to setup the same thing but some problem and what I've to write in my
> ser.cfg that line also. Sorry to take your thread.
>
> thanks
> arun
>
> On 5/18/07, Lesley Liu < [EMAIL PROTECTED]> wrote:
>
> > Hi Sergio,
> >
> > Thanks for your kindly help.
> > SIP proxy and MEDIA proxy on different PC worked well now.
> >
> >
> > Regards,
> > Lesley
> >
> >
> > 2007/5/18, Sergio Gutierrez <[EMAIL PROTECTED]>:
> > >
> > > Hi Lesley.
> > >
> > > It is good to know it worked.
> > >
> > > Yes, you could configure the mediaproxy on another computer.
> > >
> > > You still load the mediaproxy module, and configure the socket to
> > > your proxydispatcher (which must be running).
> > >
> > > In the config file of it, you define that the mediaproxy is
> > > reachable at some IP address:
> > >
> > > This is an snippet of my mediaproxy.ini file:
> > >
> > > start = yes
> > > ;socket = /var/run/proxydispatcher.sock
> > > listen= X.Y.Z.W
> > > defaultProxy = A.B.C.D
> > > accounting = off
> > >
> > > Where A.B.C.D is the machine where mediaproxy is running; it listens
> > > on 25060 TCP port.
> > >
> > > Kind regards.
> > >
> > >
> > > On 5/18/07, Lesley Liu <[EMAIL PROTECTED] > wrote:
> > > >
> > > > Hi Sergio,
> > > >
> > > > You are correct, it works after modified the parameter.
> > > > Here comes another question: what if setup mediaproxy on another
> > > > PC? how to configure the openser.cfg? Should it load dispatcher?
> > > >
> > > > Thank you.
> > > >
> > > > Regards,
> > > > Lesley
> > > >
> > >
> > >
> >
> > _______________________________________________
> > Users mailing list
> > [email protected]
> > http://openser.org/cgi-bin/mailman/listinfo/users
> >
> >
>
_______________________________________________
Users mailing list
[email protected]
http://openser.org/cgi-bin/mailman/listinfo/users
