Further, describe your setup: IP addresses of the proxies IP addresses of the clients
kaiser wrote: > Hi, > > Thanks for your help, this is the invite from initial proxy: > > > sip:[EMAIL PROTECTED]:5060;user=phone SIP/2.0 > Record-Route: <sip:1.2.3.4:5060;nat=yes;ftag=ooqjvbi7ql;lr=on> > Via: SIP/2.0/UDP 1.2.3.4;branch=z9hG4bK2e5a.835198e5.0 > Via: SIP/2.0/UDP > 192.168.0.12:2051;received=59.120.208.208;branch=z9hG4bK-kblxgjx7vsj6;rport=2051 > > > From: "0909802020 kl" <sip:[EMAIL PROTECTED]>;tag=ooqjvbi7ql > To: <sip:[EMAIL PROTECTED];user=phone> > Call-ID: [EMAIL PROTECTED] > CSeq: 1 INVITE > Max-Forwards: 69 > Contact: <sip:[EMAIL PROTECTED]:2051;line=5bj76qg6>;flow-id=1 > > > do you mean we have to add username in record_route? > > best regards > kaiser > > > > > 在 2007/5/22 上午 1:21 時，Klaus Darilion 寫到： > >> Hi! >> >> AS this is probably a loose-route problem you have to provide a log of >> the initial INVITE too. >> >> regards >> klaus >> >> kaiser wrote: >>> Dear sir, >>> We install 3 openser 1.1.0 in public internet, and we find a BYE >>> relay issue to caller SIP UA. >>> UA(a)-------Proxy1 --------Proxy2 ----Proxy 3 ---------UA(b) >>> We make call from UA(a) to UA (b), if UA(b) send Bye first, UA(a) can >>> not get Bye. >>> The packet is from Proxy2 to Proxy1 as following >>> BYE sip:1.2.3.4:5060;nat=yes;ftag=ooqjvbi7ql;lr=on SIP/2.0 >>> Record-Route: <sip:5.6.7.8;lr=on;ftag=as1b41fbeb> >>> Record-Route: <sip:5.6.7.8;lr=on;ftag=as1b41fbeb> >>> Via: SIP/2.0/UDP 5.6.7.8;branch=z9hG4bKc74c.bd89ce13.0 >>> Via: SIP/2.0/UDP 5.6.7.8;branch=z9hG4bKc74c.ad89ce13.0 >>> Via: SIP/2.0/UDP 100.200.100.200;branch=z9hG4bKc74c.321ef5e3.0 >>> Via: SIP/2.0/UDP 100.200.100.199:5060;branch=z9hG4bK75e8d6f3;rport=5060 >>> From: <sip:[EMAIL PROTECTED];user=phone>;tag=as1b41fbeb >>> To: "0909802020 kl" <sip:[EMAIL PROTECTED]>;tag=ooqjvbi7ql >>> Call-ID: [EMAIL PROTECTED] >>> CSeq: 102 BYE >>> User-Agent: Gentrice_IPPBX >>> Max-Forwards: 67 >>> Content-Length: 0 >>> Then bye is looping in proxy1. >>> BYE sip:1.2.3.4:5060;nat=yes;ftag=ooqjvbi7ql;lr=on SIP/2.0 >>> Record-Route: <sip:5.6.7.8;lr=on;ftag=as1b41fbeb> >>> Record-Route: <sip:5.6.7.8;lr=on;ftag=as1b41fbeb> >>> Via: SIP/2.0/UDP 1.2.3.4;branch=z9hG4bKc74c.1714a4e7.0 >>> Via: SIP/2.0/UDP 5.6.7.8;branch=z9hG4bKc74c.bd89ce13.0 >>> Via: SIP/2.0/UDP 5.6.7.8;branch=z9hG4bKc74c.ad89ce13.0 >>> Via: SIP/2.0/UDP 100.200.100.200;branch=z9hG4bKc74c.321ef5e3.0 >>> Via: SIP/2.0/UDP 100.200.100.199:5060;branch=z9hG4bK75e8d6f3;rport=5060 >>> From: <sip:[EMAIL PROTECTED];user=phone>;tag=as1b41fbeb >>> To: "0909802020 kl" <sip:[EMAIL PROTECTED]>;tag=ooqjvbi7ql >>> Call-ID: [EMAIL PROTECTED] >>> CSeq: 102 BYE >>> User-Agent: Gentrice_IPPBX >>> Max-Forwards: 66 >>> Content-Length: 0 >>> We used to use default script for proxy1, but the same... >>> And we do record_route, loose_route relay as well. >>> Anyone know what happen? >>> best regards >>> Thrli >>> _______________________________________________ >>> Users mailing list >>> [email protected] >>> http://openser.org/cgi-bin/mailman/listinfo/users > _______________________________________________ Users mailing list [email protected] http://openser.org/cgi-bin/mailman/listinfo/users
