Hi Anca, Thanks for the quick reply. I wondered a little about the phones, too. Alan sent me a note privately, very tactfully reminding me that I'd sent less phone information than I should have.
The Polycom 650: bootrom.ld version: 3.2.3.0002 sip version: 2.1.2.0078 The Polycom 330: bootrom.lod verion: 3.2.3.0021 sip version: 2.1.2.0049 Both phone.cfgs are attached, as well ngrep traces from reboots. I did two traces, rebooting each phone separately. Again, I appreciate the help very much. Thanks. - Jeremy >-----Original Message----- >From: Anca-Maria Vamanu [mailto:[EMAIL PROTECTED] >Sent: Thursday, July 12, 2007 08:18 AM >To: 'Jeremy George' >Cc: users@openser.org >Subject: Re: [OpenSER-Users] BLA errors > >Hello, > >The implementation of the bla extension has been done according to the >specifications in draft-anil-sipping-bla-03.txt, and tested with >Polycom 430. > Since we received positive feedback from users impementing BLA, I am >thinking that the phones you use have a different behaviour and that >here is the cause of the errors. >To detect the exact cause I would need some more data. Could you send >me a part of the log , after starting openser and the first phones >registers, subscribes and is sent a Notify? > >regards, > >Anca Vamanu > >Jeremy George wrote: > >>Hello All, >> >> I have BLA implemented, with errors. An ngrep trace of relevant packets >>showing errors follows. The configurations of both main proxy and bla >>presence server are attached. >> >> I stripped the main proxy to the bone. No outside routing at all. The >>bla presence server is almost all from the sample. >> >> 75.56.10.115 is a Cisco 7960 with one line registered: jeremy/private >> 75.56.10.116 is a Polycom 650 with two lines registered: jessica/private >> and helen/shared >> 75.56.10.117 is a Polycom 330 with two lines registered: didama/private >> and helen/shared >> 128.91.3.19 is the main proxy running openser v1.2.1 . >> 128.91.2.215 is the bla presence server running openser svn 2413 . >> >> This error: "1(1184) PUA:subs_cback_func: no reply message found" is >>being produced repeatedly on the bla presence server. >> >> Finally, I'm getting these error messages on the bla presence server: >> >> 0(1284) PUA_BLA: handle_notify: ERROR Notify in a non existing dialog >> 0(1284) WARNING: script writer didn't release transaction >> >> From time-to-time pua entries eat all of available memory. Curiously, >>they were all for the Polycom 330 and none were for the Polycom 650. >> >> Any help is greatly appreciated. Thanks. >> >>- Jeremy >> >> >> > >
330.cfg
Description: Binary data
650.cfg
Description: Binary data
log330
Description: Binary data
_______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users