Please give me a bit more credit than that, I had been using Linux for the
past 10 years ;-)
Although, from my previous questions, one can easily assume I'm a linux newbie
:-D
Z2L
----- Original Message -----
From: "raviprakash sunkara" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Sent: Wednesday, July 18, 2007 10:59:06 AM (GMT+0200) Asia/Jerusalem
Subject: Re: [OpenSER-Users] OpenSer and FreeRadius implementation
hi
oops
this versio is working fine
did u try ldconfig v , to load the library files
On 7/18/07 , OpenSer ML < [EMAIL PROTECTED] > wrote:
Hi Neeraj,
Can you please specify the versions of OpenSER and FreeRadius you are using?
I'm trying to use OpenSER 1.2.1 and FreeRadius 1.1.6
Regards,
Z2L
----- Original Message -----
From: "Neeraj Gupta" < [EMAIL PROTECTED] >
To: [EMAIL PROTECTED]
Cc: "users" < users@openser.org >
Sent: Wednesday, July 18, 2007 1:20:11 AM (GMT+0200) Asia/Jerusalem
Subject: Re: [OpenSER-Users] OpenSer and FreeRadius implementation
Ok, I will paste critical configs in email.
You need to setup radius as usual and copy dictionary files as usual.
/etc/openser.cfg:
#
# $Id$
#
# radius config script
#
# ----------- global configuration parameters ------------------------
debug=0 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
listen=udp:yy.yy.yy.yy
listen=udp:xx.xx.xx.xx
alias= sfbay.sun.com
avp_aliases="day=i:101;time=i:102"
#fifo="/tmp/openser_fifo"
# ------------------ module loading ----------------------------------
#mpath="/usr/local/openser-1.0.1/lib/openser/modules"
mpath="/usr/local/lib64/openser/modules"
#loadmodule "mysql.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "avpops.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "xlog.so"
loadmodule "uri.so"
loadmodule " acc.so"
loadmodule "auth.so"
loadmodule "auth_radius.so"
loadmodule "group_radius.so"
loadmodule "avp_radius.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc","db_url","mysql://openser:[EMAIL PROTECTED]/openser")
# neeraj changed to 0 from 2
modparam("usrloc", "db_mode", 0)
# -- acc params --
modparam("acc", "radius_flag", 1)
modparam("acc", "radius_missed_flag", 2)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 1)
modparam("acc", "service_type", 15)
modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp")
modparam("acc|auth_radius|group_radius|avp_radius", "radius_config",
"/etc/radiusclient-ng/radiusclient.conf")
# -- group_radius params --
modparam("group_radius", "use_domain", 1)
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
};
if (msg:len >= 2048 ) {
sl_send_reply("513", "Message too big");
};
# check if user is suspended
###if(is_method("REGISTER|INVITE|MESSAGE|OPTIONS|SUBSCRIBE")) {
### if (radius_is_user_in("From", "suspended")) {
### sl_send_reply("403", "Forbidden - suspended");
### exit;
### };
###};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
if (!method=="REGISTER")
record_route();
# subsequent messages withing a dialog should take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
if(is_method("BYE")) { # log it all the time
acc_rad_request("200 ok");
acc_log_request("200 ok");
}
route(1);
};
if(is_method("INVITE") && !has_totag())
{ # set the acc flags
setflag(1);
setflag(2);
};
if (!uri==myself) {
# check if user is allowed to do voip calls to other domains
if(is_method("INVITE|MESSAGE")) {
if (!radius_is_user_in("From", "voip")) {
sl_send_reply("403", "Forbidden VoIP");
exit;
};
};
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
route(1);
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
# authenticate registers
if (method=="REGISTER") {
if (!radius_www_authorize("")) {
www_challenge("", "1");
exit;
};
# check the src ip address
# no need to use this now. tested OK
###if(!avp_check("$avp(i:2)", "eq/$src_ip/ig")) {
### sl_send_reply("403", "Forbidden IP");
### exit;
###};
save("location");
exit;
};
# calls to pstn
if(uri=~"sip:00[1-9][0-9]+@") {
if(is_method("INVITE") && !has_totag()) {
if (!radius_is_user_in("From", "pstn")) {
sl_send_reply("403", "Forbidden PSTN");
exit;
};
};
# set gateway address
rewritehostport(" 10.10.10.10:5090 ");
route(1);
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
# log to acc as missed call
acc_rad_request("404 Not Found");
acc_log_request("404 Not Found");
sl_send_reply("404", "Not Found");
exit;
};
append_hf("P-hint: usrloc applied\r\n");
};
route(1);
}
# generic forward
route[1] {
# send it out now; use stateful forwarding as it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
exit;
}
/etc/radiusclient-ng/servers:
xx.xx.xx.xx test1234
yy.yy.yy.yy test1234
/etc/radiusclient-ng/radiusclient.conf:
<snip>
# neeraj
authserver xx.xx.xx.xx:1812
# RADIUS server to use for accouting requests. All that I
# said for authserver applies, too.
#
# neeraj
#acctserver localhost
acctserver xx.xx.xx.xx :1813
<snip>
Neeraj Gupta wrote:
Yes. I have this working.. all with latest pieces of software on Sun SPARC
Solaris 10.
What exactly do you need ?
-Neeraj
OpenSER ML wrote:
Hi All,
Ok, I'm a bit mixed up here, the documents are simply not cutting it.
I'm wondering if any of you have a working OpenSER + FreeRadius configuration
that I can look at and extrapulate my required settings?
I've gone over all the material I could find, but all of it reverts back
to the outdated how-to on the FreeRadius website.
Assistance would be highly appreciated.
Regards,
Z2L
_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
--
-------------------------------------------------------------
o Neeraj Gupta email: [EMAIL PROTECTED] o Netra Systems & Networking phone:
+1(408) 276-7214 x71214
o Sun Microsystems, Inc. fax : +1(408) 276-4552 o 4120 Network Circle,
USCA12-216, Santa Clara, CA 95054, USA
-------------------------------------------------------------
_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
--
Thanks &Regards
Ravi Prakash Sunkara
_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
