You can control rtpproxy via a socket or via udp. In your config you opted for udp and therefor you should start rtpproxy with udp support (check the -s option for starting the rtpproxy: -s udp:<IP>:<port>)
Regards, Ovidiu Sas On 9/10/07, Jeferson Prevedello <[EMAIL PROTECTED]> wrote: > > > Hi, > > I modified the configuration in my openser.cfg and now is possible hear > audio in 1 direction (I hear the other people). > > Interesting is that the logs shows that rtpproxy "has been disabled > temporarily". > > > openser.cfg: > #modparam("nathelper", "rtpproxy_sock", > "unix:/var/run/rtpproxy.sock") # Nathelper with RTPproxy > modparam("nathelper", "rtpproxy_sock", "udp:xxx.xxx.xxx.xxx:8899") > > service run: > root 13256 0.0 0.0 2536 344 ? Ss 13:13 0:00 > /usr/bin/rtpproxy -l xxx.xxx.xxx.xxx -s udp:xxx.xxx.xxx.xxx 8899 > > logs: > Sep 10 13:19:50 [EMAIL PROTECTED] /usr/sbin/openser[15433]: ERROR: > send_rtpp_command: > can't send command to a RTP proxy > Sep 10 13:19:50 [EMAIL PROTECTED] /usr/sbin/openser[15433]: > send_rtpp_command(): > proxy <udp:xxx.xxx.xxx.xxx:8899> does not responding, disable it > > Sep 10 13:19:50 [EMAIL PROTECTED] /usr/sbin/openser[15433]: WARNING: > rtpp_test: can't > get version of the RTP proxy > Sep 10 13:19:50 [EMAIL PROTECTED] /usr/sbin/openser[15433]: WARNING: > rtpp_test: > support for RTP proxy <udp:xxx.xxx.xxx.xxx:8899>has been disabled > temporarily > > Some tip ? > > Regards > Jeferson > > > > ----- Original Message ----- > From: Jeferson Prevedello > To: users@openser.org > Sent: Monday, September 10, 2007 11:59 AM > Subject: [OpenSER-Users] Problem with rtpproxy > > > Hi Guys, > > When I originate a call for an user behind of a NAT the call is without > audio in the two ways. > > > I believe that the problem is related to rtpproxy, however did not find > nothing of wrong in my configuration. > > > Some tip? > > > openser.cfg: > # ------------- !! Nathelper > modparam("registrar", "nat_flag", 6) > modparam("nathelper", "natping_interval", 30) # Ping interval 30 s > modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind NAT > modparam("nathelper", "rtpproxy_sock", > "unix:/var/run/rtpproxy.sock") # Nathelper with RTPproxy > > > service run: > ps -aux | grep rtp > root 26098 0.0 0.0 2532 428 ? Ss 10:40 0:00 /usr/bin/rtpproxy > root 11143 0.0 0.0 2536 352 ? Ss 11:30 0:00 /usr/bin/rtpproxy -l > xxx.xxx.xxx.xxx -s udp:xxx.xxx.xxx.xxx 7890 > > logs: > Sep 10 11:32:59 [EMAIL PROTECTED] /usr/sbin/openser[11859]: rtpp_test: RTP > proxy > <unix:/var/run/rtpproxy.sock> found, support for it enabled > Sep 10 11:32:59 [EMAIL PROTECTED] /usr/sbin/openser[11860]: rtpp_test: RTP > proxy > <unix:/var/run/rtpproxy.sock> found, support for it enabled > Sep 10 11:32:59 [EMAIL PROTECTED] /usr/sbin/openser[11861]: rtpp_test: RTP > proxy > <unix:/var/run/rtpproxy.sock> found, support for it enabled > Sep 10 11:32:59 [EMAIL PROTECTED] /usr/sbin/openser[11862]: rtpp_test: RTP > proxy > <unix:/var/run/rtpproxy.sock> found, support for it enabled > > Regards > Jeferson > > > ________________________________ > > > _______________________________________________ > Users mailing list > Users@openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > > _______________________________________________ > Users mailing list > Users@openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > _______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users