El Friday 26 October 2007 02:05:05 Ricardo Ferreira - MC escribió:
> > Any help please? I don't see any new mandatory parameter or similar in
> > module doc, what can be wrong if it worked with OpenSer 1.2.2?
> Change from 127.0.0.1 to the real IP address of your sip server, change
> the openser.cfg accordingly and reload it.... it should work....
Thanks but in doesn't work. In fact I already tryed to conect with a RtpProxy
running in other host with same error.
Now I've tryed to run it in localhost but setting the public IP:
modparam("nathelper", "rtpproxy_sock", "udp:85.76.0.110:22222")
~# rtpproxy -f -l 0.0.0.0 -s udp:85.76.0.110:22222
Exactly the same error:
INFO:nathelper:rtpp_test: rtp proxy <udp:85.76.0.110:22222> found, support for
it enabled
ERROR:nathelper:send_rtpp_command: can't read reply from a RTP proxy
ERROR:nathelper:send_rtpp_command: proxy <udp:85.76.0.110:22222> does not
respond, disable it
WARNING:nathelper:rtpp_test: can't get version of the RTP proxy
WARNING:nathelper:rtpp_test: support for RTP proxy <udp:85.76.0.110:22222> has
been disabled temporarily
And RtpProxy says:
received command "1886_0 V"
sending reply "1886_0 20040107
"
received command "1886_1 VF 20050322"
sending reply "1886_1 1
"
received command "1887_0 V"
sending reply "1887_0 20040107
"
received command "1888_0 V"
sending reply "1888_0 20040107
The same configuration worked perfectly in OpenSer 1.2.2 (now I use the SVN
2983 reversion).
Please help, I don't know what more I can try.
Thanks in advance.
--
Iñaki Baz Castillo
[EMAIL PROTECTED]
_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
