Vitaliy Gusev wrote:
venet device works with IPv6!
Describe steps which you did for venet device.
I created VE 233005:
IPv4=195.113.233.5
IPv6=2001:718:1:e::23:3005
IPv4 is working ok.
When I try to add IPv6 I get:
staj-dev:~# vzctl set 233005 --ipadd '2001:718:1:e::23:3005' --save
Adding IP address(es): 2001:718:1:e::23:3005
Failed to bring up venet0:1.
Configure meminfo: 49152
Saved parameters for VE 233005
staj-dev:~# vzctl enter 233005
entered into VE 233005
[EMAIL PROTECTED]:/# ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:195.113.233.5 P-t-P:195.113.233.5 Bcast:0.0.0.0 Mask:255.255.255.255
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
There is no venet0:1 inside of VE 233005.
--
-----------------------
Jan Tomasek aka Semik
http://www.tomasek.cz/
_______________________________________________
Users mailing list
Users@openvz.org
https://openvz.org/mailman/listinfo/users
