Hi,
after upgrade to vzctl version 3.0.18-1dso1 I got new set of
/etc/vz/dists/scripts/. There were changes in IPv6 code for Debian.
Thanks to those changes now IPv6 works between HW node and VE:
> staj-dev:~# ping6 2001:718:1:e::23:3005
> PING 2001:718:1:e::23:3005(2001:718:1:e::23:3005) 56 data bytes
> 64 bytes from 2001:718:1:e::23:3005: icmp_seq=1 ttl=64 time=0.068 ms
Problem is that I still can not reach VE from outside (staff is box with
IPv6 support).
> [EMAIL PROTECTED]:~$ ping6 2001:718:1:e::23:3005
> PING 2001:718:1:e::23:3005(2001:718:1:e::23:3005) 56 data bytes
ping does not show anything, it just hangs. In tcpdump on HW node I see:
15:38:41.465836 802.1d unknown version
15:38:41.498548 IP6 staff.cesnet.cz > 2001:718:1:e::23:3005: ICMP6, echo
request, seq 923, length 64
15:38:42.498349 IP6 staff.cesnet.cz > 2001:718:1:e::23:3005: ICMP6, echo
request, seq 924, length 64
15:38:43.462572 802.1d unknown version
15:38:43.498152 IP6 staff.cesnet.cz > 2001:718:1:e::23:3005: ICMP6, echo
request, seq 925, length 64
15:38:43.733136 arp who-has 195.113.233.73 tell 195.113.233.1
15:38:44.497951 IP6 staff.cesnet.cz > 2001:718:1:e::23:3005: ICMP6, echo
request, seq 926, length 64
15:38:45.427653 IP6 fe80::215:faff:fe87:3100 > ip6-allnodes: ICMP6, router
advertisement, length 64
15:38:45.462453 802.1d unknown version
15:38:45.497753 IP6 staff.cesnet.cz > 2001:718:1:e::23:3005: ICMP6, echo
request, seq 927, length 64
15:38:46.497552 IP6 staff.cesnet.cz > 2001:718:1:e::23:3005: ICMP6, echo
request, seq 928, length 64
I was suspecting route problems but routes does look ok. VE:
[EMAIL PROTECTED]:/# route -6
Kernel IPv6 routing table
Destination Next Hop
Flags Metric Ref Use Iface
::1/128 :: U 0 1 1 lo
::1/128 :: U 0 0 1 lo
2001:718:1:e::23:3005/128 :: U 0 13 1 lo
2001:718:1:101:20b:dbff:fe93:5c38/128 2001:718:1:101:20b:dbff:fe93:5c38 UC 0 101 0 venet0
fe80::/64 :: U 256 0 0 venet0
ff00::/8 :: U 256 0 0 venet0
::/0 :: U 256 0 0 venet0
HW node:
staj-dev:/proc/sys/net/ipv6/conf/venet0# route -6
Kernel IPv6 routing table
Destination Next Hop
Flags Metric Ref Use Iface
::1/128 :: U 0 8 1 lo
2001:718:1:e::23:3004/128 :: U 0 926 1 lo
2001:718:1:e::23:3005/128 :: U 1024 0 0 venet0
2001:718:1:e:213:72ff:fe1b:b97/128 :: U 0 0 1 lo
2001:718:1:e::/64 :: U 256 302 0 eth0
fe80::1/128 :: U 0 0 1 lo
fe80::213:72ff:fe1b:b97/128 :: U 0 58 1 lo
fe80::/64 :: U 256 0 0 eth0
fe80::/64 :: U 256 0 0 venet0
ff02::1/128 ff02::1 UC 0 327 0 eth0
ff00::/8 :: U 256 0 0 eth0
ff00::/8 :: U 256 0 0 venet0
::/0 fe80::215:faff:fe87:3100 UGDA 1024 483 0 eth0
Please, does anyone have any sugestions?
--
-----------------------
Jan Tomasek aka Semik
http://www.tomasek.cz/
_______________________________________________
Users mailing list
Users@openvz.org
https://openvz.org/mailman/listinfo/users
