Have you enabled IP forwarding (as per
http://wiki.openvz.org/Quick_installation#sysctl)? Are you using real IP
for your VE?
Ian jonhson wrote:
Thank you very much~~
But it seems that I can not connect internet in VE. It is OK when ping
to its host system, however when ping external IP address, it dumps. I
google the internet to find how to set the netwrok in VE, but I can
not find any hint to do it.
Could anybody give some advices how to configure network?
Thanks again,
Ian
On 10/18/07, Kirill Korotaev <[EMAIL PROTECTED]> wrote:
Ian,
just like to any other usual machine using
ssh from your workstation.
1. assign IP address to some VE using
ve0# vzctl set <VEID> --ipadd <VEIP> --save
2. just in case, check that VE is pingable from your workstation:
ws# ping <VEIP>
3. just in case, check that VE is running sshd service:
ve0# vzctl exec <VEID> ps axf | grep sshd
if it is not running sshd then enter to VE using vzctl enter command
and install/start sshd service.
4. don't forget to set root user password
ve0: vzctl set <VEID> --userpasswd root:mypassword
5. now you can login to VE as to usual machine using it's IP
Kirill
Ian jonhson wrote:
---------- Forwarded message ----------
From: Ian jonhson <[EMAIL PROTECTED]>
Date: Oct 18, 2007 2:17 PM
Subject: Re: [Users] boot error - unable to mount root fs on unknown-block(0, 0)
To: [EMAIL PROTECTED]
Thank you very much!
I have created my own VE, however how can I login VE by ssh? I used
the IP setting described in
http://wiki.openvz.org/Installation_on_Debian.
Thanks again,
Ian
On 10/17/07, E Frank Ball III <[EMAIL PROTECTED]> wrote:
On Wed, Oct 17, 2007 at 12:20:01PM +0800, Ian jonhson wrote:
> Where can I get the pre-built kernel image?
http://download.openvz.org/debian/dists/etch/main/binary-i386/base/
In your sources list add:
deb http://download.openvz.org/debian etch main
I added the line in source.list, but apt-cache search said it can not
open the website.
"apt-cache search linux-image-2.6.18-openvz" shows the openvz kernels
for me.
I'm using linux-image-2.6.18-openvz-13-39.1d2-686_028.39.1d2_i386.deb
I opened the link given above and found the image file, but I don't
know how to use it after download the image file.
Could you give me some advices?
If you manually downloaded it then install it with
"dpkg -i linux-image-2.6.18-openvz-13-39.1d2-686_028.39.1d2_i386.deb"
--
E Frank Ball [EMAIL PROTECTED]
_______________________________________________
Users mailing list
Users@openvz.org
https://openvz.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@openvz.org
https://openvz.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@openvz.org
https://openvz.org/mailman/listinfo/users
