How to use veth instead for venet -----Ursprungligt meddelande----- Från: users-boun...@openvz.org [mailto:users-boun...@openvz.org] För Alexander Prinsier Skickat: den 25 januari 2009 15:43 Till: users@openvz.org Ämne: Re: [Users] ip address
mattias wrote: > i only have access to dynamic ips > will it work with openvz? If you use venet for networking on the VE's, then you need to assign static ip's to the containers. They can be private however, and then you setup NAT on the hardware node. Or you could use veth for networking, and then you can use a dhcp client from inside the container to get an ip address. You need to bridge all veth's with your eth0 interface for that to work. The ip of the hardware node itself can be dynamic or static, that doesn't matter. It's the VE's you have to look at. Alexander _______________________________________________ Users mailing list Users@openvz.org https://openvz.org/mailman/listinfo/users _______________________________________________ Users mailing list Users@openvz.org https://openvz.org/mailman/listinfo/users