Dear Paulo,
thank you for this feedback!
Could you please create an issue in https://bugs.openvz.org/ to help tracking
and avoid missing anything in e-mails ?
Thank you,
Vasily Averin
On 10.03.2022 00:12, Paulo Coghi - Coghi IT wrote:
Hello OpenVZ community,
First, I would like to congratulate Virtuozzo on the important achievement of
OpenVZ 9 / Virtuozzo 9 on kernel 5.14 (as well as the OpenVZ 8 on 4.18).
When trying to use two NVMe cards together for both OS and '/vz' partitions,
OpenVZ 9 only successfully installs and properly boots when leaving on
automatic partition mode, which creates the logical volume in linear mode (no
RAID 1,0,etc).
When trying to install with LVM on RAID 1 mode to the '/vz' partition, the installer
gives the "unable to initialize disks" error and the installation stops.
When installing with LVM on RAID 0 mode (again on '/vz'), the installation proceeds to the end, but
the OS doesn't boot properly after a reboot, asking to choose between "systemctl default"
(which doesn't work) or "systemctl reboot".
The hardware works fine with both OpenVZ 9 with linear logical volume, or any
other Linux with any LV type (linear, raid, etc).
But just in case, here are the specs:
- Ryzen 5950X
- 128GB DDR4 3200MHz
- 2x 3.84TB Samsung Enterprise NVMe
I look forward to proceeding with more tests that you may consider useful.
Cordially,
Paulo Coghi
_______________________________________________
Users mailing list
[email protected]
https://lists.openvz.org/mailman/listinfo/users
_______________________________________________
Users mailing list
[email protected]
https://lists.openvz.org/mailman/listinfo/users
