Am Mittwoch, den 02.10.2013, 11:26 +0000 schrieb Sven Kieske:
> Hi,
> 
> we were now able to test this.
> 
> The IP does not show up in ovirt-node-setup TUI, however if you drop to
> console you see this:
> 
> [root@vroot4 ~]# ip a s

...

> 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
>     link/ether 00:25:90:32:e4:88 brd ff:ff:ff:ff:ff:ff
> 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
> state UP qlen 1000
>     link/ether 00:25:90:32:e4:89 brd ff:ff:ff:ff:ff:ff
>     inet6 fe80::225:90ff:fe32:e489/64 scope link
>        valid_lft forever preferred_lft forever

...

> 8: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
> state UNKNOWN
>     link/ether 00:25:90:32:e4:89 brd ff:ff:ff:ff:ff:ff
>     inet 10.0.1.101/24 brd 10.0.1.255 scope global ovirtmgmt
>     inet6 fe80::225:90ff:fe32:e489/64 scope link
>        valid_lft forever preferred_lft forever
> 10: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
>     link/ether 86:f2:1e:01:7d:4a brd ff:ff:ff:ff:ff:ff

...

> So the address gets switched from eth1 to the virtual nic "ovirtmgmt"

What do you mean with switched?
eth0 becomes the slave of the bridge ovirtmgmt, the bridge then get's
the IP configuration.

> and does not show up in the TUI.

When a Node is registered with engine the network page should get
disabled. That's currently not the case and can be seen as a bug.

> Is this an intended behavior?

What behavior exactly?

> Furthermore, for what reason does ovirt create all those bonding devices?

That should indeed be fixed.

> We installed the el6 variant of the iso.
> 
> An additional info, which I noticed:
> 
> lsb_release -a does not provide a correct output, it just states:
> 
> "RedHatEnterpriseVirtualizationHypervisor" which is not very
> informative, no version information or whatsoever.

Mike,
do you know what the output should look like?

Greetings
fabian

> Regards
> 
> Sven
> 
> On 02/10/13 11:16, Fabian Deutsch wrote:
> > Am Dienstag, den 01.10.2013, 15:05 +0000 schrieb Sven Kieske:
> >> Hi,
> >>
> >> we encountered the same problem as Anil.
> >>
> >> We wanted to give this nightly iso a try:
> >> http://jenkins.ovirt.org/job/node-devel/825/distro=centos64/artifact/ovirt-node-iso-3.1.0-0.999.825.el6.iso
> >>
> >> but it seems it doesn't contain the required vdsm-plugin?
> > 
> > True. The plugin is missing.
> > 
> > I've prepared two isos (but untested) which address this bug:
> > http://fedorapeople.org/~fabiand/node/ovirt-node-iso-3.0.1-1.0.201310020841draft.vdsm.el6.iso
> > http://fedorapeople.org/~fabiand/node/ovirt-node-iso-3.1.0-0.999.201310020841draft.vdsm.fc19.iso
> > 
> > They are basically the base iso (found in jenkins) plus an edit-node
> > run:
> > /edit-node --repo edit-node-el6.repo --install ovirt-node-plugin-vdsm
> > ovirt-node-iso-3.0.1-1.0.201310020841draft.el6.iso
> > 
> > Please let me know if they fix the problem.
> > 
> > Greetings
> > fabian
> > 
> >> So any help on this topic would be appreciated.
> >>
> >> Greetings
> >>
> >> Sven
> >>
> >> On 30/09/13 20:52, Fabian Deutsch wrote:
> >>
> >>>
> >>> Hey Anil,
> >>>
> >>> you were doing the right thing to persist the network cfg files. It
> >>> might have been node that was to greedy when reconfiguring DNS :)
> >>>
> >>> You might take a look at this fix:
> >>> http://gerrit.ovirt.org/19705
> >>> It is untested but at least I could reproduce the behavior you were
> >>> seeing and prepared the patch based on that findings.
> >>> An ISO containing that fix will sooner or later land here:
> >>> http://jenkins.ovirt.org/job/node-devel/
> >>>
> >>> (The queue is currently quite long, which can take a day until the patch
> >>> above is turned into an ISO).
> >>>
> >>> Long story short, please check if this patch fixes your problem, I'll
> >>> also try to take a look at it when an iso is ready.
> >>>
> >>> And file a bug if you want to track the state of this issue.
> >>>
> >>> Greetings
> >>> fabian
> >> _______________________________________________
> >> Users mailing list
> >> Users@ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/users
> > 
> > 
> > 
> > 
> > 


_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to