On Fri, Feb 7, 2014 at 12:02 PM, Dafna Ron wrote: > If you do not have an iptables or any connectivity issue still existing from > the host to the storage than your host is not seeing any of the devices on > the storage > it might be a problem with access list (password or iqn) but the storage is > not exposing the luns to the host.
O my iscsi target (CentOS 6.5 with sw iscsi target), I still have [root@c6iscsit ~]# tgtadm --lld iscsi --mode target --op show Target 1: iqn.2013-09.local.localdomain:c6iscsit.target11 System information: Driver: iscsi State: ready I_T nexus information: LUN information: LUN: 0 Type: controller SCSI ID: IET 00010000 SCSI SN: beaf10 Size: 0 MB, Block size: 1 Online: Yes Removable media: No Prevent removal: No Readonly: No Backing store type: null Backing store path: None Backing store flags: LUN: 1 Type: disk SCSI ID: IET 00010001 SCSI SN: beaf11 Size: 53683 MB, Block size: 512 Online: Yes Removable media: No Prevent removal: No Readonly: No Backing store type: rdwr Backing store path: /dev/VG_ISCSI/ISCSI_OV01 Backing store flags: Account information: ovirt ACL information: 192.168.230.102 192.168.230.103 My node has ip 192.168.230.102 and can ping it no iptables rules [root@c6iscsit ~]# iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination and in targets.conf that is in place default-driver iscsi <target iqn.2013-09.local.localdomain:c6iscsit.target11> backing-store /dev/VG_ISCSI/ISCSI_OV01 incominguser ovirt my_ovirt_setup_pwd initiator-address 192.168.230.102 initiator-address 192.168.230.103 </target> so it seems ok to me And discovery is ok from ovirt node.... where are chap user/pwd stored on ovirt node? Gianluca _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users