I was never able to achieve a stable system that could survive the loss of a
single node with glusterfs. I attempted to use replica 2 across 3 nodes (which
required 2 bricks per node as the number of bricks must be a multiple of the
replica, and you have to order them so the brick pairs span servers). I enabled
server-side quorum, but found out later that client side quorum is based on
'sub volumes', which means that with a single node failure on replica 2, even
though there were 3 nodes, it would go into a readonly state.
After disabling client-side quorum (but keeping server side quorum) I thought
the
issue was fixed, but every once in a while, rebooting one of the nodes (after
ensuring
gluster was healed) would lead to i/o errors on the VM guest and essentially
make
it so it needed to be rebooted (which was successful and everything worked after
even before bringing the downed node back up). My nodes were all combined
glusterfs
and ovirt nodes. I tried using both 'localhost' on the nodes as well as using a
keepalived VIP.
Its possible my issues were all due to client-side quorum not being enabled,
but that would require replica 3 to be able to survive a single node failure,
but
I never pursued testing that theory. Also, heal times seemed a bit long for
a single idle VM, it would consume 2 full cores of CPU for about 5 minutes for
healing a single idle VM (granted, I was testing on a 1Gbps network, but that
doesn't explain the CPU usage).
-Brad
On 7/4/14 1:29 AM, Andrew Lau wrote:
As long as all your compute nodes are part of the gluster peer,
localhost will work.
Just remember, gluster will connect to any server, so even if you
mount as localhost:/ it could be accessing the storage from another
host in the gluster peer group.
On Fri, Jul 4, 2014 at 3:26 PM, Punit Dambiwal <hypu...@gmail.com> wrote:
Hi Andrew,
Yes..both on the same node...but i have 4 nodes of this type in the same
cluster....So it should work or not ??
1. 4 physical nodes with 12 bricks each(distributed replicated)...
2. The same all 4 nodes use for the compute purpose also...
Do i still require the VIP...or not ?? because i tested even the mount point
node goes down...the VM will not pause and not affect...
On Fri, Jul 4, 2014 at 1:18 PM, Andrew Lau <and...@andrewklau.com> wrote:
Or just localhost as your computer and storage are on the same box.
On Fri, Jul 4, 2014 at 2:48 PM, Punit Dambiwal <hypu...@gmail.com> wrote:
Hi Andrew,
Thanks for the update....that means HA can not work without VIP in the
gluster,so better to use the glusterfs with the VIP to take over the
ip...in
case of any storage node failure...
On Fri, Jul 4, 2014 at 12:35 PM, Andrew Lau <and...@andrewklau.com>
wrote:
Don't forget to take into consideration quroum, that's something
people often forget
The reason you're having the current happen, is gluster only uses the
initial IP address to get the volume details. After that it'll connect
directly to ONE of the servers, so with your 2 storage server case,
50% chance it won't go to paused state.
For the VIP, you could consider CTDB or keepelived, or even just using
localhost (as your storage and compute are all on the same machine).
For CTDB, checkout
http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/
I have a BZ open regarding gluster VMs going into paused state and not
being resumable, so it's something you should also consider. My case,
switch dies, gluster volume goes away, VMs go into paused state but
can't be resumed. If you lose one server out of a cluster is a
different story though.
https://bugzilla.redhat.com/show_bug.cgi?id=1058300
HTH
On Fri, Jul 4, 2014 at 11:48 AM, Punit Dambiwal <hypu...@gmail.com>
wrote:
Hi,
Thanks...can you suggest me any good how to/article for the glusterfs
with
ovirt...
One strange thing is if i will try both (compute & storage) on the
same
node...the below quote not happen....
---------------------
Right now, if 10.10.10.2 goes away, all your gluster mounts go away
and
your
VMs get paused because the hypervisors can’t access the storage. Your
gluster storage is still fine, but ovirt can’t talk to it because
10.10.10.2
isn’t there.
---------------------
Even the 10.10.10.2 goes down...i can still access the gluster mounts
and no
VM pause....i can access the VM via ssh...no connection
failure.....the
connection drop only in case of SPM goes down and the another node
will
elect as SPM(All the running VM's pause in this condition).
On Fri, Jul 4, 2014 at 4:12 AM, Darrell Budic
<darrell.bu...@zenfire.com>
wrote:
You need to setup a virtual IP to use as the mount point, most
people
use
keepalived to provide a virtual ip via vrrp for this. Setup
something
like
10.10.10.10 and use that for your mounts.
Right now, if 10.10.10.2 goes away, all your gluster mounts go away
and
your VMs get paused because the hypervisors can’t access the
storage.
Your
gluster storage is still fine, but ovirt can’t talk to it because
10.10.10.2
isn’t there.
If the SPM goes down, it the other hypervisor hosts will elect a new
one
(under control of the ovirt engine).
Same scenarios if storage & compute are on the same server, you
still
need
a vip address for the storage portion to serve as the mount point so
it’s
not dependent on any one server.
-Darrell
On Jul 3, 2014, at 1:14 AM, Punit Dambiwal <hypu...@gmail.com>
wrote:
Hi,
I have some HA related concern about glusterfs with Ovirt...let say
i
have
4 storage node with gluster bricks as below :-
1. 10.10.10.1 to 10.10.10.4 with 2 bricks each and i have
distributed
replicated architecture...
2. Now attached this gluster storge to ovrit-engine with the
following
mount point 10.10.10.2/vol1
3. In my cluster i have 3 hypervisior hosts (10.10.10.5 to
10.10.10.7)
SPM
is on 10.10.10.5...
4. What happen if 10.10.10.2 will goes down.....can hypervisior host
can
still access the storage ??
5. What happen if SPM goes down ???
Note :- What happen for point 4 &5 ,If storage and Compute both
working
on
the same server.
Thanks,
Punit
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
