----- Original Message ----- > From: "Shanil S" <xielessha...@gmail.com> > To: users@ovirt.org > Sent: Thursday, August 28, 2014 11:31:30 AM > Subject: [ovirt-users] Unable to assign profile to the nic > > Hi All, > > I am unable to assign the profile using the ovirt api code, the following xml > code is used for creating the nic > > <nic> > <interface>virtio</interface> > <name>eth0</name> > <boot_protocol>static</boot_protocol> > <mac address='".$ip->mac_address."'/> > <network> > <ip address='".$ip->mac_ip."' netmask='255.255.255.0' > gateway='".$ip->mac_gateway."'/> > </network>
Try not to provide the 'network' element at all. The vnic profile replaced the 'network' element when attaching a nic to a network. In this context you should use either <network><name>...</name></network> or the <vnic_profile id="..."/>. As Juan explained in other thread, any other parameter for network are being ignored and network element without name is referred as "empty network". > <on_boot>true</on_boot> > <vnic_profile id='bbabc471-667d-4221-bc8e-4ab30b3dcc34' /> > </nic> > > Could you please check if anything wrong with it ? > > > > -- > Regards > Shanil > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users