----- Original Message ----- > From: "Phil Daws" <ux...@splatnix.net> > To: "Antoni Segura Puimedon" <asegu...@redhat.com> > Cc: "Dan Kenigsberg" <dan...@redhat.com>, users@ovirt.org > Sent: Monday, October 27, 2014 10:37:18 AM > Subject: Re: [ovirt-users] oVirt 3.5 & NAT > > That is what I tried but oVirt appears to overwrite the bridge information on > boot :( Thanks, Phil
But before rebooting, does it work as you intended? If so, you could just make a vdsm hook that adds ovirtmgmt to the ovs bridge after it is set up. (I could give more directions into how to do it). > > ----- Original Message ----- > From: "Antoni Segura Puimedon" <asegu...@redhat.com> > To: "Phil Daws" <ux...@splatnix.net> > Cc: "Dan Kenigsberg" <dan...@redhat.com>, users@ovirt.org > Sent: Monday, 27 October, 2014 8:00:33 AM > Subject: Re: [ovirt-users] oVirt 3.5 & NAT > > > > ----- Original Message ----- > > From: "Phil Daws" <ux...@splatnix.net> > > To: "Dan Kenigsberg" <dan...@redhat.com> > > Cc: users@ovirt.org > > Sent: Saturday, October 25, 2014 5:02:59 PM > > Subject: Re: [ovirt-users] oVirt 3.5 & NAT > > > > Hmmm, this is becoming difficult .. > > > > I have added into the engine the custom hook and understand how that will > > work. The issue is how can a single NIC use two different bridges ? > > Example with OVS would be that one requires: > > > > em1 -+ ovirtmgmt (bridge) -> management IP (public) > > + ovs (bridge) -> firewall IP (public) > > | > > + vlan 1 > > + vlan 2 > > > > this works fine when using OVS and KVM, without oVirt, so there must be a > > way > > to hook the two together without a Neutron appliance. > > > > Any thoughts ? Thanks, Phil. > > I haven't tried this, and it may not work, but what happens if you add the > ovirtmgmt > bridge as a port of the ovs bridge? > > > > > > ----- Original Message ----- > > From: "Dan Kenigsberg" <dan...@redhat.com> > > To: "Phil Daws" <ux...@splatnix.net> > > Cc: users@ovirt.org > > Sent: Wednesday, 22 October, 2014 3:54:46 PM > > Subject: Re: [ovirt-users] oVirt 3.5 & NAT > > > > On Wed, Oct 22, 2014 at 03:12:09PM +0100, Phil Daws wrote: > > > Thanks Dan & Antoni: > > > > > > I wonder then if I could replace the standard libvirt defined network > > > with > > > an OpenVSwitch one like I have on my dev system? That is just straight > > > KVM with OVS integrated. Maybe a bit more overhead in administration but > > > possibly less than having to spin up a Neutron Appliance. > > > > Once you start to use the vdsm-hook-extnet, all that you need to do is > > to replace the libvirt-side definition of the "external network". This > > may well be an OpenVSwitch-based network e.g. > > http://libvirt.org/formatnetwork.html#elementVlanTag > > _______________________________________________ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users